@george1421 said in >FOG vs UEFI:
f you have a windows dhcp server AND you need to pxe boot both bios and uefi based computers you might want to review this wiki page to setup dhcp profiles so your dhcp server sends the proper boot file name based on the target computer:
Thank you both . @Tom I have already tested with this configuration without success.
@George. I also followed this tutorial but I will do it again a second time and keep you informed. THANKS
Thanks Sebastian.
after changing option 67 to undionly.kpxe I can’t get a network boot dhcp
Re: UEFI vs fog
Good morning
After several tests, I am unable to start my machines on the network with a window dhcp server and the fog solution.
On my DHCP server two options:
66 with ip from my fog
and 67 with snonly.efi . I confess to despair. Thanks for your help.
Here are some pictures of the unsuccessful steps taken, perhaps they can help out.
Right click to create the vendor class. Setup the class with the targeted vendor class identifier. Setup pre-defined options for the new class. Select the correct class in the drop down list and click add. Setup an option 66 and 67. After the options are created for the class, you can set their values in the Predefined options and values window. Enable these two options under the advanced tab of either scope options or server options.
my dhcp server is not fog and here are the two options I put
066 standard with ip the server fog X.X.X.X
and
067 filename snponly.efi
it does not work. could you help me. in advance thank you
Hello
so I check the parameters but I still have the same problem.
ok I try max client on fog a 0 and on the nas a 10 … I keep you informed.
Thank you
I did not change anything at the storage level …
And I have never tested the download of an image since I have never been able to create until now 
Hello George
Actually it was the path in ftp Path.
My image capture works. and I thank you very much.
now I meet the problem attached when downloading the image : - /
yes we can do a team viewer.
Can you set a date and time if you can?
IF you can I give you a clear diagram of my install.