I think I had this problem with fog 0.32 also. Does fog stay logged in when you let a tab with the logged in fog home screen (with the graphs) run all the time and open new/other tabs for working with fog? (Didn’t monitor fog 1.2 and svn versions for this problem yet)
e6410: UEFI not available.
e6420: UEFI available, UEFI pxe booting not allowed. Boot via efi flash drive using the debug ipxe.efi no problem.
e6430: UEFI available, UEFI pxe booting allowed. Booting either via PXE or generated debug messages (same as 7010. Also noted the 6430 and 7010 where purchased the same year).
e7440: UEFI available, UEFI pxe booting allowed. Booted correctly with either PXE or USB
e7240: UEFI available, UEFI pxe booting allowed. Booted correctly with either PXE or USB
OK, so I started digging into the details of the 7010 and the 6340 then comparing them to the 790 and 6420. The thing (from the spec sheet) that is in common between the 7010/6430 is the chip set with Q77/QM77 respectively. The 790/6420 has the Q65/QM67. I thought the graphics were the same between the two but on the 7010 we have the Intel HD4000 (integrated) and on the 6430 we have Nvidia Nvs 5200. All four systems use the intel 82579LM ethernet nic.
Patience, I’ve found, makes all the difference.
Report bugs, request features, or get the latest progress.
I think I finally understand what the issue is.
You are not allowed to delete tasks from the Search list. This was never the intent, but it was mistakenly put in.
I’ve now fixed it. For now, I’m not going to allow any deleting/canceling from the search fields. I also am ensuring you can cancel all tasks that are in a progress state (meaning they’re not complete or cancelled already).