@tenorio-leandro said in not all images appear:

Is it possible at the time to deploy via pc, not all images appear?

I don’t understand this question. Its not a clear question at all.

If you are a non-native english speaker, please ask the question in your native language so its clear to us what you ask.

@tenorio-leandro said in could not verify verify mount:

I mounted a space nfs in my server /mnt/vol_fog/

So just to be clear the actual disk volume where the bits will be stored are on a different computer than your FOG server? If yes then that will not work. Its equivelent to in windows mounting a remote directory on your windows server as the W drive, then trying to share the W: drive out so that a 3rd computer can mount it. It doesn’t work that way.

Back to your FOG server, the nfs share needs to be a block device or NFS won’t share it. An iSCSI LUN is allowed since its a block level device. I have not personally done this, but it should work.

What is your end goal here?

What device is your fog server connected to?

@tenorio-leandro How do you shutdown the machine before capturing?

@tenorio-leandro See my post here: https://forums.fogproject.org/post/147487

@tenorio-leandro As far as I remember these two “profiles” are relicts from the days when FOG had a so called mobile user interface as well. This has been removed some years ago.

You can still try to add different access profiles to FOG using the access control plugin. Though understand this is not part of the core code and we are currently not able to support this in case it needs fixing. As well you need to know the mentioned plugin only hides certain menu items but is not properly restricting access.

@sebastian-roth Thanks a lot, I followed you answer, thats right now. Thanks a lot.

@tenorio-leandro said in Problema https:

But I want change these certificate :
SSLCertificateFile /var/www/fog//management/other/ssl/srvpublic.crt
SSLCertificateKeyFile /opt/fog/snapins/ssl//.srvprivate.key
I want put my certificate in virtual host, but when the boot via pxe stop.
Because this certificate .pem I dont want change in this moment.

Well, if you swap out this certificate and key with your custom files then PXE boot won’t work anymore because iPXE does not know your CA (certificate authority). If you want to fix PXE booting you need to compile fresh iPXE binaries that have your custom CA included.

@tenorio-leandro You might start by telling us some specs: versions of FOG and fog-client as well as the Linux OS and version you use.

Are you sure you used the correct FOG server IP and webroot? See here: https://forums.fogproject.org/topic/13091/fog-service-setup-unable-to-install-ca-certificate

If you FOG Server is Ubuntu 20.04 or newer and you enabled HTTPS then you might need to use https://github.com/FOGProject/fog-client/releases/download/0.12.0/SmartInstaller_fixed-tls.exe

As well we have references that anti virus software can block the communication: https://forums.fogproject.org/topic/9489/client-11-9-will-not-install-fails-at-ca-certificates

@george1421 said in Doubt about boot in computer:

@tenorio-leandro For uefi yes its possible to boot from pendrive.

https://forums.fogproject.org/topic/6350/usb-boot-uefi-client-into-fog-menu-easy-way

Thanks, I will make this. Thanks a lot!