Posts made by Sparky

This one i rebooted and left all night and it was checking in all night and stopped when i logged into the device! now it has not checked in for 20 min before that i can see the log updated every 5 min!

Im getting really frustrated with this new fog version never had so much issues with .32 anyways now i get it to update the log all the time but it only shows taskreboot updates and nothing else no snapins deploy under the client on fog all snapins are enabled i tryed to global disable task reboot and now the client reports module is globally disabled but only reporting for task reboot!

like i said it will run for around 5 min and then nothing gets added to the fog file untill i reboot! I have disabled all snapins and nothing changes!

No av at this time

Nothing changes these things i have only snap in enabled and like all other times it reports to the log for up to 10 min and then its dead! Like something is killing fog client or something it states the service is running but untill you reboot it wont do anything! Is this compatible with windows 8.1 i really don’t want to go find a new app deployment solution! fog .32 worked so well with windows 7!

All snapins are removed from the queue i rebooted device and fog log started adding at 10.08 and stopped at 10:12

here is what i get this station as not updated the fog file since yesterday at 11:16

[url=“/_imported_xf_attachments/1/1379_fog service.JPG?:”]fog service.JPG[/url]

thats it until i reboot! i have 150 of these windows 8.1 devices and so far i have tryed 4 and they all do the same thing!

Here is the log

[url=“/_imported_xf_attachments/1/1378_fog.txt?:”]fog.txt[/url]

I open and close the fog.log file as like you said notepad wont update as its changes.i just opened the log file on the tablet and the last entry was from yesterday at 11:49 AM usercleanup

i can open and close the file all i want but nothing is changing in the file unless i reboot the deive

i got it to push them once to the device and now it wont again! I am running FOG 1.2.0 and windows 8.1 tablets

Now they are not saying 0 mac address but only update the log for a few min then stop and nothing works until you reboot the device!

The one im looking at now pushed all snapins added to the domain fine but now i try again and NOTHING! The last time the fog log was updated was 4 hours ago! do you want the new log?

I am getting frustrated with these! If i look at the fog log on the c drive i can see it adding info for about 2-4 min then its dead! I was able to get one to install by restarting it a few times! Like i said it updates the fog log for about 2-4 min then i have left them on for 4 hours and nothing more gets added to the log!

no the mac address machup! the snapins never start on these devices though!

[ATTACH=full]1373[/ATTACH]

[url=“/_imported_xf_attachments/1/1373_Capture.JPG?:”]Capture.JPG[/url]

ok i got it to join the domain it was turned on globally but when i uploaded the clients with excel it didnt turn on any features for the client. i turned them all on and that works but still cant get it to install the snapins!

where do you want me to run that code at? on the server or device the device im using is a windows 8.1 tablets only have wifi!!

6 hours
and on the fog server host name changer is active!

This is the fog log i cant deploy any snapins and it wont auto add to the domain.

9/22/2014 11:52 AM FOG Service Engine Version: 3
9/22/2014 11:52 AM Starting all sub processes
9/22/2014 11:52 AM 14 modules loaded
9/22/2014 11:52 AM * Starting FOG.AutoLogOut
9/22/2014 11:52 AM * Starting FOG.SnapinClient
9/22/2014 11:52 AM * Starting FOG.DirCleaner
9/22/2014 11:52 AM FOG::ClientUpdater Starting client update process…
9/22/2014 11:52 AM FOG::ClientUpdater Sleeping for 388 seconds.
9/22/2014 11:52 AM FOG::AutoLogOut Starting process…
9/22/2014 11:52 AM FOG::DirCleaner Sleeping for 52 seconds.
9/22/2014 11:52 AM * Starting FOG.DisplayManager
9/22/2014 11:52 AM * Starting FOG.GreenFog
9/22/2014 11:52 AM FOG::DisplayManager Starting display manager process…
9/22/2014 11:52 AM * Starting FOG.GUIWatcher
9/22/2014 11:52 AM FOG::GUIWatcher Starting GUI Watcher…
9/22/2014 11:52 AM * Starting FOG.HostNameChanger
9/22/2014 11:52 AM FOG::GreenFog Sleeping for 33 seconds.
9/22/2014 11:52 AM * Starting FOG.HostRegister
9/22/2014 11:52 AM FOG::HostRegister Starting host registration process…
9/22/2014 11:52 AM * Starting FOG.MODDebug
9/22/2014 11:52 AM FOG::HostnameChanger Starting hostname change process…
9/22/2014 11:52 AM FOG::HostnameChanger Yielding to other subservices for 9 seconds.
9/22/2014 11:52 AM * Starting FOG.PrinterManager
9/22/2014 11:52 AM * Starting FOG.SnapinClient
9/22/2014 11:52 AM FOG::PrinterManager Starting interprocess communication process…
9/22/2014 11:52 AM FOG::MODDebug Sleeping for 100 Seconds
9/22/2014 11:52 AM FOG::PrinterManager interprocess comm startup: OK
9/22/2014 11:52 AM * Starting FOG.TaskReboot
9/22/2014 11:52 AM * Starting FOG.UserCleanup
9/22/2014 11:52 AM * Starting FOG.UserTracker
9/22/2014 11:52 AM FOG::SnapinClient Starting snapin client process…
9/22/2014 11:52 AM FOG::TaskReboot Taskreboot in lazy mode.
9/22/2014 11:52 AM FOG::TaskReboot Starting Task Reboot…
9/22/2014 11:52 AM FOG::UserCleanup Sleeping for 18 seconds.
9/22/2014 11:52 AM FOG::UserTracker Starting user tracking process…
9/22/2014 11:52 AM FOG::DisplayManager Unable to continue, MAC is null!
9/22/2014 11:52 AM FOG::AutoLogOut Unable to continue, MAC is null!
9/22/2014 11:52 AM FOG::HostRegister Exiting because only 0 mac address was found.
9/22/2014 11:52 AM FOG::SnapinClient Sleeping for 442 seconds.
9/22/2014 11:52 AM FOG::TaskReboot No valid MAC addresses found!
9/22/2014 11:52 AM FOG::TaskReboot No task found for client.
9/22/2014 11:52 AM FOG::UserTracker Unable to determine MAC address, exiting…
9/22/2014 11:52 AM FOG::HostnameChanger Attempting to connect to fog server…
9/22/2014 11:52 AM FOG::HostnameChanger Module is disabled on this host.
9/22/2014 11:52 AM FOG::HostnameChanger Host name was not found in the database.
9/22/2014 11:52 AM FOG::UserCleanup Starting user cleanup process…
9/22/2014 11:52 AM FOG::UserCleanup Attempting to connect to fog server…
9/22/2014 11:52 AM FOG::UserCleanup Module is disabled globally on the FOG Server, exiting.
9/22/2014 11:53 AM FOG::GreenFog Starting green fog…
9/22/2014 11:53 AM FOG::GreenFog Attempting to connect to fog server…
9/22/2014 11:53 AM FOG::GreenFog Module is disabled on this host.
9/22/2014 11:53 AM FOG::DirCleaner Starting directory cleaning process…
9/22/2014 11:53 AM FOG::DirCleaner Attempting to connect to fog server…
9/22/2014 11:53 AM FOG::DirCleaner Module is disabled on this host.
9/22/2014 11:54 AM FOG::MODDebug Reading config settings…
9/22/2014 11:54 AM FOG::MODDebug Reading of config settings passed.
9/22/2014 11:54 AM FOG::MODDebug Starting Core processing…
9/22/2014 11:54 AM FOG::MODDebug Operating System ID: 6
9/22/2014 11:54 AM FOG::MODDebug Operating System Minor: 2
9/22/2014 11:54 AM FOG::MODDebug MAC ID 0 B0:10:41:61:CF:69
9/22/2014 11:54 AM FOG::MODDebug MAC POST String: B0:10:41:61:CF:69
9/22/2014 11:54 AM FOG::MODDebug A user is currently logged in
9/22/2014 11:54 AM FOG::MODDebug Username: *Edited (Username)
9/22/2014 11:54 AM FOG::MODDebug Hostname: LENOVO-PC
9/22/2014 11:54 AM FOG::MODDebug Attempting to open connect to: [url]http://HSFOG/fog/service/debug.php[/url]
9/22/2014 11:54 AM FOG::MODDebug Server responded with: Hello FOG Client
9/22/2014 11:54 AM FOG::MODDebug Module has finished work and will now exit.

That makes sense! I figured it out and wanted to post my resolution if anyone else has the issue! What I did is did a kernel update and now its working.

Thanks for you help!

I have changed the exit style to exit and it didn’t change anything? Do I need to do a reboot of the fog server to refresh the settings or is clicking save enough? I have 2 fog servers setup and one that was upgraded to version 1.2.0 from 1.1.2 works fine. The only difference is the one that works is running on Ubuntu server 14.04 and I read that its not recommended to use 14.04 so this server I installed 12.04 and did a fresh install of 1.2.0. I noticed the text on the one that was upgraded and works is green and the one that doesn’t is red. is there a different version of the pxe image? Can I copy it from the working one to the other one? where is the files that would be required located at?

Thanks for any help!