Topics created by NateUH

@sebastian-roth @george1421

Thanks the updated kernels fixed it
it now PXE boots and gets into fog and can upload and download images perfectly!

Hi, seems it was failing to update the DB at the end of the imaging,

We reset the DB creds and now its working perfectly 🙂

@NateUH Yes it is supposed to auto-start on bootup of your FOG server.

Please run

systemctl is-enabled FOGMulticastManager.service

to see if it’s enabled on bootup. If you get disabled there must have been an issue when running the installer. You might run

systemctl enable FOGMulticastManager.service

or re-run the installer to do this for you.

But if it’s enabled already then you might be running into a startup dependency issue in FOG 1.5.7 which we have fixed lately. Ask here if you need more details on this.

@sebastian-roth

Update:
The switches were waiting for 260sec (4min 20sec) for the clients to send out a “I still want to receive this multicast stream” but the clients didn’t so the switches stopped sending the multicasts. I’ve changed that so the switches will now wait for 1260sec (21min) before stopping the multicast.

Our networks team had a look and muticasting is now working!