Posts made by Joseph Hales

Try seeing if your ide mode is set for ide or ahci if it boots after changing this setting you can either leave it on the new setting ot enable the correct driver in windows and switch it back.

You might fix this by truncating the snapins db there is a post about it when first installing svn.

Go to storage menu and change the clients there.

As for default behavior in SVN services are enabled on a pxe registered machine if you register the machine via the web interface then the default is off.

I generally get the latest ks or kitchen sink version when running .32 but I just saw Tom’s reply go with his for sure.

Make sure the Operating System and Manager type are both set correctly if this is a .32 image it should be set to partimage not partclone.

Also change menu exit type to grub for these I believe.

Have you tried updating the kernel I try several and save them with a unique name that I specify in the host record for testing to avoid issues with other working systems.

I’m pretty sure the wiki hasn’t been updated for 1.2 you might look here [url]http://fogproject.org/forum/threads/integrating-hirens-boot-15-2-into-fog-1-2-0.12155/[/url]

Update we have a PRTG server running on the same network I’m working with its admin to get it to monitor via SNMP still troubleshooting that as for network from the server switch it connects direct to out 10ge backbone and from there to our fiber ring to the individual schools I have it set for 20 simultaneous connections depending on the results of the monitoring I may increase that significantly we image at 25 separate campuses so its used pretty much non stop.

I have the same model and we don’t have any issues under SVN 2952 but as you can’t upgrade that doesn’t help you much pics or a video of where it happens would help a lot.

My production FOG server is running a 4 NIC bonded channel any suggestions on how to monitor its use. I’m trying to determine if this is overkill in my network or actually utilized properly before I deploy new hardware. This is on ubuntu 12.04 desktop just fyi.

Thank you that fixed it also needed to open port 80 in ufw. Should I disable UFW completely or just open individual ports and if so is the command simply ufw disable?

I goofed up on a new install of fog on a test server I’m setting up and need to change the DNS settings but every time i run the installer for 1.2.0 it just uses the same values where are these stored on Ubuntu 12.04 fog 1.2.0.

Stolen shamelessly from Tom.
Basics: Please provide:
FOG Version (e.g. FOG 0.32, FOG 0.33, FOG 0.01)
OS Version (e.g. CentOS 6.5, Ubuntu 12.04, Redhat 6.5)

Can you provide your installation details?
This is now included as a long file in 1.1.0 in location /var/log/foginstall.log

Have you checked your apache error logs? Can you provide information from these logs?
Debian based Location (normally)
/var/log/apache2/error.log
Redhat based Location (normally)
/var/log/httpd/error_log

Have you searched the forums for your issue yet?
Have you checked the [URL=‘http://fogproject.org/wiki’]wiki[/URL] yet?
Kernel Issues: [URL=‘http://fogproject.org/wiki/index.php/FAQ’][COLOR=#737373]http://fogproject.org/wiki/index.php/FAQ[/COLOR][/URL]
[SIZE=11px] [/SIZE]

The error codes appear to be as per [url]http://www.hiteksoftware.com/knowledge/articles/049.htm[/url]
[SIZE=4][FONT=arial][COLOR=#000000]1326 Logon failure: unknown user name or bad password.[/COLOR][/FONT][/SIZE]
[SIZE=4][FONT=arial][COLOR=#000000]1791 A remote procedure call is already in progress for this thread.[/COLOR][/FONT][/SIZE]

I had this issue on some of my older images where I had an older version of the fog client built into the image but it auto updates and starts deploying snapins after a reboot. The two solutions are update your image or just restart the service after the fog.log says update complete pending restart.

Actually no but I may update two similar models soon if it reoccurs what would you like me to do.

Reuploading after running bootrec /fixmbr gives you a working image.

bootrec /fixmbr does fix the deployed image, I am testing the fixed image by reuploading it and then deploying it.