Posts made by ch3i

@DarkEnergy said:

@ch3i
You meant the imaging software, got you!!!
If there is a way to view a FOG log I can confirm or deny your answer, otherwise I will have to take your word for. My major concern is how to fix it if there is a way.

If you have old image before 1.2, the FOG_FORMAT_FLAG_IN_GUI display the information in the image details.

@DarkEnergy Can you list file in /images/image_that_restore_bug ?

@DarkEnergy said:

@ch3i
I am not sure what are you asking me. The only FOG I have used is 1.2.0.

Partclone

@Neil-Underwood On each server you can connect to your Mysql with the root user without password ?

@Neil-Underwood It’s the config of your Storage Node ?

@DarkEnergy said:

Hi there to all of you FOGGERS.
I am now having issues randomly with some other images.
I am getting and error:
" An error has been detected!
Image failed to restored
Computer will reboot in 1 minute"

The error is after Partclone try to access the image.

Partclone v0.2.78 http://partclone.org
Starting to resotre image (-) to device (/dev/sda1)
device (/dev/sda1) is mounted at
error exit

To save some time I have checked the password in the storage and also the TFTP sever and they are all good, I have also reset the password for fog user to the same as the one for the storage and the TFTP, plus check all the permissions on the file system set to 777 and still no go.

I have been having problems sine the fist update I did to the server.
Is there a way to just keep the images, destroy the server and reinstall FOG back to the original configuration in 1.2.0 without any of the updates. The last schema change in MySQL was the one giving me the issue since then I haven’t been able to get FOG were it was.

Thanks for all you help.

It’s a partclone image or an old partimage ?

@Neil-Underwood If you want to test your mysql connection over the LAN between Master and Node :

mysql --host="ip" --user="your_username" --password="your_password"

Regards,
Ch3i.

@sudburr It’s seem to be ok on the log, it’s working ?

@Trixsta101 said:

Thanks hadn’t seen that. but suspect its to old now… Hopefully someone has it working on 1.2 iPXE

Have you solve your problem ?

@alpilles.info said:

Hi, ok thanks.
I have run the scripts but i got some error line 19 entire number expected
nfs: unrecognized service
iptables: unrecognized service
Usage FOGMulticastManager {start|stop|restart}
FOGSnapinReplicator: unrecognized service
Usage FOGImageReplicator {start|stop|restart}
Usage FOGScheduler {start|stop|restart}
sed: -e expression n°1, caractère 4: command `s’ not finished

(i have translate some line because it was in french), else everything seem fine in the log file.

For NFS the command is (I think) :

service nfs-common status

For FOG services, in 1.2 there is no “status” added in these scripts.

@Julianh said:

I tried to put as much information in as possible, and forgot the actual error! Sorry it’s

Failed to mount NFS volume

Thanks for replying.

It’s seem to be an error in your export file ? How do you add that new storage in FOG ? Could you post your export and where is mounted your new hdd.

@afuente26 said:

It´s the same problem like Axel had a few month ago

https://forums.fogproject.org/topic/4310/scheduled-tasks-are-not-starting-in-fog-1-2-0

Please check if Cron is running : http://www.cyberciti.biz/faq/howto-check-cronjob-is-running-not/

@Julianh said:

But my images are failing with the following error.

Hi,

Which error ?

Regards,
Ch3i.

@archknowall said:

Hey everyone, having a problem I can’t find anything about. My install of fog 1.2.0 was working correctly, but after a restart when I go to the management site it briefly shows the login screen then displays a 404 page stating “Not Found: The requested URL /wgcgi.cgi was not found on this server”.

Any ideas?

Hi,

It’s seem to be a Firewall problem.
Can you provided your FOG/Network configuration ?

Regards,
Ch3i.

@Matthieu-Jacquart Good luck

@Tom-Elliott said:

Once again, I just fixed this issue.

Please update and re-run the cp command I gave.

Just update to latest SVN : No blank page, and update a location is OK.
Thank’s a lot

@jjacobs said:

@Tom-Elliott
I Just ran the command again. But no difference.

Is there an error after run that ?

sudo cp -r /path/to/svn/trunk/packages/web/lib/plugins /var/www/fog/lib/

@cml said:

The FOG services do not have a status flag on Debian.

iptables: unrecognized service
Usage FOGMulticastManager {start|stop|restart}
Usage FOGSnapinReplicator {start|stop|restart}
Usage FOGImageReplicator {start|stop|restart}
Usage FOGScheduler {start|stop|restart}

The only way I know is to check if they are running via: ‘ps -ef | grep [F]OG’

Tom had it two week ago in SVN : https://forums.fogproject.org/topic/4897/add-the-status-of-fog-services-in-the-command-service

@afuente26

Hi,

No status in you FOG services ?

----------------------Firewall status below
----------------------FOGMulticastManager status below
----------------------FOGSnapinReplicator status below
----------------------FOGImageReplicator status below
----------------------FOGScheduler status below

Regards,
Ch3i.

@Matthieu-Jacquart said:

Some of computers work now for snapin and printers but not all, and I don’t know why…

Hi,

Some models work, and other not ? Or in the same model you have some issue ?

Regards,
Ch3i.