Posts made by BSZAdmin

@Sebastian-Roth
Hello again,
the rights are as following:

The result didnt change.
I also took a screenshot when the client boots. Is there a problem to solve? I Dont know.

Thx again
Greets
JT

@Sebastian-Roth
Hi,
the output has too many characters for uploading.
Is the beginning enough?

root@fogserver:/# ls -alR /datastore
/datastore:
insgesamt 32
drwxrwxrwx  5 itcadmin   plugdev   4096 Mai 23 17:47 .
drwxr-xr-x 27 root       root      4096 Mai 20 13:16 ..
drwxrwxrwx 87 fogproject www-data  4096 Mai 23 16:11 images
drwxrwxrwx  2 itcadmin   plugdev  16384 Sep 28  2017 lost+found
drwxrwxrwx  3 fogproject www-data  4096 Mai  6 12:44 snapins

/datastore/images:
insgesamt 9272
drwxrwxrwx 87 fogproject www-data    4096 Mai 23 16:11 .
drwxrwxrwx  5 itcadmin   plugdev     4096 Mai 23 17:47 ..
drwxrwxrwx  2 fogproject www-data    4096 Sep  3  2015 001broseHPEPkleinwin7x64M
drwxrwxrwx  2 fogproject www-data    4096 Dez 14 10:43 001-HPx2Tablets-

@Tom-Elliott
Hi…
here is the outout

Hi Folks,
i had fogserver installed on Ubuntu with a mounted image store.
I installed it (fog 1.5.6) new on debian 9 and mounted the image store.
I changed the settings in the exports file.
The deployment of images works.
The capturing is the problem :
I get this error message

The exports settings are:

The Storage node settings are:

I also manipulated the config.class.php:

Maybe it is easy, but i am not able to solve the prob.
I request help.
Thanks in advance
Greets
Jürgen

Hi Sebastian,
it works thx.
i forget that there was a scheduled reboot
sometimes it is so easy but it costs a lot of time ;))
Thanks

Hey folks,
I want to start a Snapin process but i get the following error messages from the fog.log.
---------------------------------SnapinClient---------------------------------
16.01.2019 10:57 Client-Info Client Version: 0.11.16
16.01.2019 10:57 Client-Info Client OS: Windows
16.01.2019 10:57 Client-Info Server Version: 1.5.5
16.01.2019 10:57 Middleware::Response Success
16.01.2019 10:57 SnapinClient A power operation is pending, aborting module

i dont know what this power operation is.
Maybe one of u has an idea ;)))
Thx in advance
Greets
Jürgen

Hi,
i had the same problem with DELL Precision 3630.
no bootable device was found because the internal PCIe SSD was in Raid 0 mode.
I switched it to non RAID0 an then it works. But pay attention. I had to reinstall the OS.
Hope that helps.
Greets

@Sebastian-Roth
Hi Thx 4 the answer.
Meanwhile i solved my HTTP 5xx error.
The client has 2 NICs.
Both were registered with different Hostnames on the fogserver.
i deleted one.
The Boot works - no errors anymore
2 weeks of trying anf then that “simple” thing.
i hope it will help…
greets

@Sebastian-Roth
Hi
Do u mean this one?
@george1421 said in Create Task Capture Error:

@Sebastian-Roth I remoted into the OPs fog server. I switch him over to the working branch and repulled the using git. After I reran the installer all of the files were where they should be. He was able to schedule a deployment. I think he is good for now.
If so, i do not know what to do
Sorry
Can u explain it?
thx in advance
greets

@raiemaille
Hi
Do u know the differences between the old conf an the new conf file?
So that i can modify my conf file?
thx
greets
jt

@george1421
Thx :))

edit:
after all i had to edit the refind.conf in /var/www/html/fpg/service/ipxe because the refind menu appears after network boot
i searched for the string scanfor
i edited the line to scanfor internal,hdbios
now it works (so far ;))
Greets
JT

Jiiiiihah… I solved it by myself :))
Steps:
Entering the Setup of the Mainboard (UEFI/BIOS)

• CSM Support diabled
• network stack enabled
• leaving with saving and reentering the bios/uefing
• placing the right boot order in the boot menu (1. nic, 2. Windows10)

Preparing the DHCP Server with a new vendor class following these steps:
https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence#Using_Windows_Server_2012_.28R1_and_later.29_DHCP_Policy
I took PXEClient:Arch:0007 with the ipxe.efi for the Option67.
I did not change the refind.conf as mentioned here:
https://forums.fogproject.org/topic/10773/fog-with-uefi-refind-error-failure-booting-legacy-bios-os/11

FOG Server:
Entering the Hostmanagement:
Host Bios Exit Type: none
Host EFI Exit Type: Refind_EFI

And now it works :)))

Hello,
booting vom SAN device is an often discussed issue in the forum. I read a lot of threads but i cannot find my problem there.
Environment:
FOG Server 1.5.0 rc9 Revision 6080
Client: Aquado PC with a B360N WiFi Motherboard from Gigabyte
Boot Sequence: NIC - SSD - DVD Rom

The registration process works fine. I see the client in the host section of the fog server.
And after that the boot process stops with prompting the “Booting from SAN device” message.
If I change the boot order now: SSD - NIC - DVD --> black screen with blinking cursors - system hangs.
I tried to change the bios exit types. But no one of them solved the problem.
I read that therer are bios vs UEFI issues, but i cannot see any switches in the BIOS to change.

I hope these informations are enough to understand my problem.
If not i will deliver them.

Thanks for the help in advance and sorry for my “good” english.
Greets
Jürgen

@Sebastian-Roth
Hi Sebastian,
thx for the files. :))
My next step is to update the kernel.
Also the Hosts must be configured ( on the general page of the hosts i have to fill the right kernel in).
I will try to do that but in the moment i am not able to update the kernel (unable to contact server).
Greets JT

Re: PXE Boot HP X2 210 (Hybrid tablet Windows 10 Pro)
Hello together,
the issue in the former thread has marked as solved.
A new kernel was used to get the pxe boot working.
I tried to download it, but the link is broken.
Where can i get the files?
Thanks in advance
Greets
Jürgen