@george1421 said in Blank Screen with Blinking cursor in top left corner:
mode
Apologies for the delayed reply I am off on military duty with limited internet. They are set to UEFI mode, how would I go about getting a resolution on the rEFInd exe not finding the disk for 1 specific laptop model?
That is correct, also I verified the “default exit mode” and it is set to REFIND_EFI. Would a Windows, bios or driver update have this affect?
We are having an issue, we get a black screen and blinking cursor in the upper left corner after the Fog splash screen to boot to Hard Drive. So far it is isolated to Dell Latitude 5570’s that we have been able to identify. We have different models out there, Dell Latitude 5530 to 5590. If we ESC past the pxe-boot it will boot to Windows like it is suppose too.
Fog version: 1.5.5
bzImage Version: 4.19.6
bzImage32 Version: 4.19.1
I am having the same issue, with the black screen and blinking cursor in the upper left corner after the Fog splash screen to boot to Hard Drive. So far it is isolated to Dell Latitude 5570’s that I have found was there a fix?
Fog version: 1.5.5
bzImage Version: 4.19.6
bzImage32 Version: 4.19.1
@themcv @Sebastian-Roth That is looking to be the fix… The on server size now shows ~48GB and only took 15min to upload to the server. I am deploying the image to another laptop and the ETA is 12min. Thank you for your help. FYI, we build our images from scratch with Win10 download from Microsoft with a SA agreement so it must be a built in thing 
.
@george1421 But we don’t activate/use Bitlocker…
@sebastian-roth this all you were looking for? or did you need more detail on a particular drive?
@george1421 we are not using legacy mode in the bios we are using the UEFI boot mode.
@george1421 I didn’t see a 6th column below (assuming you meant row) is what I got.
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 8897879E-4ECF-42A1-A6DC-F682422F50B6
Device Start End Sectors Size Type
/dev/sda1 2048 1026047 1024000 500M EFI System
/dev/sda2 1026048 1288191 262144 128M Microsoft reserved
/dev/sda3 1288192 975800319 974512128 464.7G Microsoft basic data
/dev/sda4 975800320 976637447 837128 408.8M Windows recovery environment
@sebastian-roth No worries, this is from the the source 5580 that we created (at least that is what my PC team tells me )
… and it is Win 10 64bit. I can re-create the image with a fresh version of windows on the master again and re-upload it to my Fog server, a
@sebastian-roth this originally create on the newer 1.4.4.
@sebastian-roth this is happening on all our new (straight from box) Dell Latitude 5580’s
@sebastian-roth 
@sebastian-roth @developers here are 2 screenshots. 
@george1421 transfer speed is avg. 4GB/min, sorry there was a size limit on the jpeg upload.
@george1421 on the laptop being imaged currently the “File System” says raw. I have attached a pic. 
@george1421 yes it is a Dell latitude 5580 laptop
