Server
1.5.6Debian 9.94.19.48 TomElliott 64 and 4.19.48 TomElliott 32Client
Lenovo X1 Carbon Gen6Lenovo Dock USB-C DK1633Windows 10 Pro 64disabledDescription
Hello,
I’ve the same problem on Lenovo X1 Gen 6.
As @george1421 suggested, I turned to FOS. Unfortunately I don’t understand the documentation to build an image.
Thanks for your help.
Solution
This works well with the adapter provided by Lenovo.
@george1421 said in [ipxe.efi] No menu with Optiplex 3010:
The issues with the Dell x90s and x010s are know, but thank you for confirming on 390 and 3010 variants.
Yes, but it’s for wiki =]
@george1421 said in [ipxe.efi] No menu with Optiplex 3010:
As for the 3020s, I know that uefi device initialization does take time. Its almost at the point where you think its locked up, it will finish initializing the device.
Exactly and it’s aggaining!
@george1421 said in [ipxe.efi] No menu with Optiplex 3010:
FWIW, refind is used on the other end. When leaving the FOG iPXE menu to attempting to boot from the local uefi hard drive. So refind will not help you get iPXE to run.
Yes I know, but SANBOOT does not work.
@george1421 said in [ipxe.efi] No menu with Optiplex 3010:
You can use the FOS usb boot stick if you need to image these systems to bypass pxe booting if you need.
It’s true, but UEFI is only for test at the moment. I’ve made an image for notebook now.
@george1421
For my part, I tested on several models with BIOS update:
I did not test 7xx/7xxx series because they have the same behavior than 3xx/3xxxx series.
@george1421
Thanks for your guick answer.
So, can I update this page ?
I will test on a 390 and a 790 also shot. I have Lenovo E73 too.
Hello,
I recently created a new Windows 10 image in UEFI. The capture was done from VMware vSphere without too much trouble. I wanted to test the deployment of the image on one of our stations and here is what I have as a message:
I have of course followed the following documentation: https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence
Thank you for your help.
It works with %WINDIR%\sysnative\windowspowershell\v1.0\powershell.exe!
Why FOG don’t use by default this path?
Thanks a lot for your help!
edit: can you mark the post from Joe as solution please?
My apologies for my absence.
@Wayne-Workman
I think you put your finger on the problem.
@jbsclm
AVG don’t remove this key.
@joe-schmitt
%WINDIR%\sysnative\windowspowershell\v1.0\powershell.exe does not exist.
I test with %SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe but not working…
Hello,
I created a script to uninstall AVG Protection and then install Trend Agent Security. The script works perfectly in a Powershell window. By snapin, line 10 does not work. Do you have an idea ?
To see the script (sorry for french comment) : https://framagit.org/alexandre.LG/shared_on_inios/blob/8c62e0f109a5948e0d064cc9f17928922d17c208/deployTrendSecurityAgent.ps1
Thanks in advance for your help.
Thanks for your answer @Tom-Elliott and sorry, I had not seen that detail. The task should be deleted when it is completed, as for snapins. Or put an icon as for ping stations.
Hello,
I created a delayed snapin task but it doesn’t work. I read somewhere that it’s necessary to modify some files for GMT compatibility but for tests, I’ve programmed two tasks at two different hours. First task, detailed in the video below, run two minutes after programmed time. The second task is programmed to start at 22:00.
This morning not any task has run.
Thanks in advance for your help.
Same problem for me on Windows 7 and 10…
I already reset encryption key but same error.
@Wayne-Workman I think the wake-up task must be delivered anyway. This poses no problem to simply start a station while another task is pending or in progress.
First issue:
Second issue:
Hello,
When a snapin in pending on a workstation, it’s not possible to go to FOG boot menu on this workstation.
Already with snapin, it’s not possible push snapin and WOL, but WOL and snapin work…
Thanks for your work!
@george1421
No problem. Debian stable can’t use php7 with default repository.
@Sebastian-Roth
I think is not necessary on current stable but maybe for stretch (next stable).
Ubuntu is “based” on Debian testing repo, php-bcmath may be necessary for him?
Hello,
First
When installing on a Debian stable (8.5):
Skipping package: php5-bcmath...............................(Does not exist)
Package does not exist in current stable of Debian but exist in Ubuntu (Xenial, without 5 in name).
Second
When I try to deploy a snapin on computer that as no attached snapin:
Thank you for your work!
Oops , I forgot : FOG Git 7380
What log?
Hello!
My storage space quickly down but I’m not using FOG webui. I lost almost of 2Go in two days! Where can I find which consumes much?
Server :
FOG only is installed on this server.
Thanks for your replay.
Thank you guys, here’s the procedure I finally used:
SOLVED ! 