Hello, im From Romania - RO and i think you should add this langue to …here is the translation

### SHUTDOWN PROMPT ###
{company} trebuie să efectueze o mentenanță pe acest computer.
Vă rugăm să salvați orice lucrare și să închideți toate programele.
Anulare
Ascunde
Reamintește 
Restartează ACUM
Oprește ACUM
Reamintește in
X ore Y minute Z secunde

### NOTIFICATIONS ###
Oprire Anulata
Oprirea a fost anulata
Oprire Amânata
Oprirea a fost amanata pentru {time}
Oprirea se va petrece in {time}

Urmează sa fii deconectat curând
Vei fi deconectat dacă vei rămâne inactiv

Se instaleaza {snapin name}
Va rugam sa nu Închideți pana la finalizarea acestui proces 

{snapin name} Sa Instalat
Instalarea sa încheiat cu succes si poate fi folosit

@tian …that’s actualy a great ideea i will give it a try…but after you get this information about the Storage Device Type…etc …how do you add these details to that specific host inventory in FOG in the <Hard Disk ; Hard Disk Firmware ; Hard Disk Serial Number > ?

@UserBxl

@UserBxl said in problem : partition is too big for the disk (in deploy):

OOBE mode

…i dont know what to say about this…i have not tried it…here are my captured default images :

@UserBxl well…if you still have the Source PC up and running…you should resize it before capture it to FOG…so that you have an “working source PC” …and i advise you to first of all to ALWAYS make backups before any other changes…that way you can “play” with your system as you wish.
I repete , in my case : the SOURCE disk was biger (even if the actual used size was smaller) , and the DESTINATION (deployment) disk was smaller (even if the captured image was even smaller that the disk)
But first of all…tell me…what disk’s and what partitions did the SOURCE had when you first captured the image ? (if its Thinkbook, i guess its a laptop)
And one more thing…why don’t you select “Resizable” in stead of “Not Resizable” ? …this little thing “Not Resizable” could be the cause for your problem
In theory, if you capture lets say, an WesternDigital 500GB HDD with “Not Resizable” , then you will have to deploy that immage to an identical drive in order for it to work properly.
Thats why i always use “Single Disk - Resizable” …for me it works just fine
But if your “Thinkbook” has 2 hard drives…i don’t know what to say…that is tricky

I had the same problem :

• Source Disk was 500GB
• Image size (without page-file of course) was 120GB
• Destination Disk was 250GB

My solution was :

• Edit/resize the Souce Disk (With Paragon/MiniToolPartitionMagic…etc) to the approximate size (in my case, i had 1 partition “C:” to 130GB )
• Delete the existing Image from FOG
• Re Capture the Source Disk
• Re Deploy

@Sebastian-Roth said in Unauthorized storage node:

known issue with the latest version and can savely be ignored

I wonder …dose this bug appears on update from other versions…or is it by default from 1.5.9 and later even on fresh clean installation ?
I remember having 1.5.8 Official and did not had any issues, or at least not this one with the “Unauthorized” Storage error

@robertkwild said in inaccessible boot device:

something to do with this pc

…perhaps and most likely yes

I had the same issue in the past…my Default Image was created in VM environment…but when i deployed it, i get the same BSOD.

Make sure you check all of these :

• Storage controller in BIOS is set to the same of the PC/VM from where u had captured the “default” image. (probably AHCI) and the boot option (MBR or UEFI) is the same.
• (in my case…but i can’t exactly explain why) Before you capture the disk, the partition aliment is in this order : 1 Efi System Partition ; 2 Recovery Partition ; 3 “C:” partition (that is Boot partiton).

Good luck.

@Sebastian-Roth said in Snapin Communication ERROR: The path is not of a legal form:

fixed in 1.5.10.3

Yess it works as intended …for Snampins at least …i see u did not find the time to fix the M.2 NVMe problem …and the Storage Nodes being Unauthorized

Hy guys.
Since the last update from 1.5.9 to 1.5.10 dev-branch version …i didn’t try out my Snapins…and now i’m getting diferent errors :

1 :

3/30/2023 1:28:22 PM Client-Info Client Version: 0.13.0
3/30/2023 1:28:22 PM Client-Info Client OS: Windows
3/30/2023 1:28:22 PM Client-Info Server Version: 1.5.10
3/30/2023 1:28:22 PM Middleware::Response Success
3/30/2023 1:28:22 PM SnapinClient Running snapin AdminShareAccesC$
3/30/2023 1:28:22 PM Middleware::Communication Download: ://192.168.192.111//fog/service/snapins.file.php?mac=2C:F0:5D:EA:27:C4|0A:00:27:00:00:0F||00:15:5D:51:CC:7F&taskid=660
3/30/2023 1:28:22 PM Middleware::Communication ERROR: Could not download file
3/30/2023 1:28:22 PM Middleware::Communication ERROR: Illegal characters in path.
3/30/2023 1:28:22 PM SnapinClient C:\Program Files (x86)\FOG\tmp\AdminShareAcces.reg
3/30/2023 1:28:22 PM Middleware::Communication URL: http://192.168.192.111/fog/service/snapins.checkin.php?taskid=660&exitcode=-1&mac=2C:F0:5D:EA:27:C4|0A:00:27:00:00:0F||00:15:5D:51:CC:7F&newService&json

2:
3/30/2023 1:04:52 PM Client-Info Client Version: 0.13.0
3/30/2023 1:04:52 PM Client-Info Client OS: Windows
3/30/2023 1:04:52 PM Client-Info Server Version: 1.5.10
3/30/2023 1:04:52 PM Middleware::Response Success
3/30/2023 1:04:52 PM SnapinClient Running snapin AdminShareAccesC$
3/30/2023 1:04:52 PM Middleware::Communication Download: ://192.168.192.111//fog/service/snapins.file.php?mac=74:56:3C:25:5A:B0&taskid=659
3/30/2023 1:04:52 PM Middleware::Communication ERROR: Could not download file
3/30/2023 1:04:52 PM Middleware::Communication ERROR: The path is not of a legal form.
3/30/2023 1:04:52 PM SnapinClient C:\Program Files (x86)\FOG\tmp\AdminShareAcces.reg

Could u please point me where to look and what to change, in order that me snap ins to work again ?

@Sebastian-Roth said in Windows Keys Management Plugin:

overwrite each others settings

Yess…this was the cause …i’ve uninstalled the plugin and now all seems ok
10x dude

Re: Windows 10: Product keys and naming?

Hy guys.
I know this is an old post…but im just trying to understand and get help for this plugin, that, in my opinion, helps me a lot.

Ok so, right now, i have dev-branch version is 1.5.10
I have over 350 Windows hosts, but im not using Volume License Key
Each host has his own OEM/OEI Windows Key and i keep track of them by the unique MAC address.
Usually i use the “Product Key” inside the settings of a host to activate that Windows.

I must specify that the “default” Windows installation that i make and capture, are in a vSphere/VMware environment, so no Windows key installed for that default image.

…sometimes the Host Name changes
…sometimes the the Host name Remains the same, but the device changes, maybe because of imminent damage or just being upgraded (also the Windows Key changes)

So my question is :

Is there a way to “Link bidirectionally” the information in the Host and Windows Keys Management Plugin ?

Im interested to make a link between :

Windows Key Plugin <->Host

Windows Key Name <-> Host name
Windows Key Description <-> Host Primary MAC
Windows Key <-> Host Product Key

I think this would be a plugin thing to do…and if i change the information in the host, or, in the Windows Keys Management Plugin, the change to be also in that particularly Host

…i don’t know if it’s a bug or it’s just me…but sometimes , after i add the “Host Product Key” and click “Update” …then add something in the “Host Description” and click “Update” again …the information in the “Host Product Key” just vanishes
I’ve notice that i can not add the whole information and click update because somethings like “Host Location” or “Host Image” or “Host Bios Exit Type” …just don’t stay the way i set them…so that’s why i have to add the information and click Update after each information added .