It appears that with new client the AD join feature is not functioning. there is an error stating something (im no longer at work to see the log exactly) to the effect of missing AD information so its not attempting to join the Active Directory. otherwise the NEW Client works as Described! Awesome…

Old Clients V.032 and .0.7.x to .0.8.0 will need to be manually removed prior to installing .0.8.1 I’m looking in to a way to use GPO to remove the legacy version and possibly to remove the directories/fog reg entry for the newer client version so that i can push out the msi with command line aurguments for silent install in the back ground.
If anyone has figured a way to do this easily in an AD enviroment let me know just message me please

Bit of Info about the Fog as a CA…
Must install client with the IP address of the FOG Server instead of the DNS name since the cert authority ties to the ip address when it dish’s the cert out to the client.

@Tom-Elliott
I have the folder but do not think I did… it also had me set it up from the trunk install into the /root/fogproject.

I can verify this but didnt want to break it. should i run the installer from the /opt/fogproject directory again then copy my folders over?

@Tom-Elliott
you there? I’m trying to grab your attention on Hangouts if your still on… or you have my desk #
Feel free to buzz me

We’ve identified that the client has to be uninstalled and re-installed on all existing machines so it will grab the new cert. however what i cant figure out is why my uploads to the database are failing.
here is a snip from the log file for Apache

[Mon Sep 30 10:47:47.143776 2019] [proxy_fcgi:error] [pid 1988] [client 172.31.178.10:53788] AH01071: Got error ‘PHP message: PHP Warning: ftp_login(): Login incorrect. in /var/www/fog/lib/fog/fogftp.class.php on line 464\n’
[Mon Sep 30 10:47:50.593180 2019] [proxy_fcgi:error] [pid 2415] [client 172.31.178.10:53790] AH01071: Got error ‘PHP message: PHP Warning: ftp_login(): Login incorrect. in /var/www/fog/lib/fog/fogftp.class.php on line 464\n’

now I’ve verified the user account and password work for FTP as i can connect tot he FTP with the same credentials but i see no files listed at all. and I still get this error…

somewhere i can look?
Tom Elliot has not been online to assist. can someone else?
maybe i dont have my linux enviroment configured correctly?

Thanks
Bill

ok that was it… My server is back online after the updates. thank you so much.
.fogsettings changed the package to libcurl4 because the install was not a fresh install.

got it now thank you so much for the fast response.
Bill

@Sebastian-Roth
Thanks
yes im running the DEV branch. and i upgraded from linux mint 17.3 to 18.3 then to 19.1 mint.
that was what i was looking for the location where i can change what its calling for and this isnt a new install.
I’l give this a shot and report back. thanks
Bill

hello all. its been a long time and I haven’t gotten a response from @Tom-Elliott ,
has anyone had an issue getting Fog to install on a ubuntu system ver 18? i had originally an issue with Apache2, that is resolved, not it appears the installer calls for Libcurl3 and when it tries to update it it fails Curl during the check. further reading shows they pulled support for libcurl3 and now its 4 but fog is looking for 3. anyone have a workaround or am i overlooking the obvious?
need assistance ASAP. production server. currently down.
Thanks
Bill

Always with the Excuses! lmao…

I have had this issue myself but clearing the encrytping data for the host in question, allowed communication.

I’m currently looking to upgrade the hd space on my FOG server… my new found problem (my dumb fault for not checking)
My Dell PE 2950 has a perc6i controller and it maxed out at 2TB hd’s so guess what this dumb ass just got? 4X 3TB hd’s and my controller doesnt support it. So in hunting around i found an HP server I decomissioned that has a smart array p400 controller i can make work it has the proper cabeling but!!! always a dam but. the firmware has to be updated…

HP the fun people changed their support site to require a live maint contract or warranty on the devices to gain access to the newest firmware for this controller.
What are the chances on of my fellow FOG enthusiats have this ISO image stored somewhere i might be able to get it from?

here is the current link for the newest version.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4091567&swItemId=MTX_8f34f27973a04a71b211d728ab
Please get back to me asap if you can help.

It appears that with new client the AD join feature is not functioning. there is an error stating something (im no longer at work to see the log exactly) to the effect of missing AD information so its not attempting to join the Active Directory. otherwise the NEW Client works as Described! Awesome…

Old Clients V.032 and .0.7.x to .0.8.0 will need to be manually removed prior to installing .0.8.1 I’m looking in to a way to use GPO to remove the legacy version and possibly to remove the directories/fog reg entry for the newer client version so that i can push out the msi with command line aurguments for silent install in the back ground.
If anyone has figured a way to do this easily in an AD enviroment let me know just message me please

Bit of Info about the Fog as a CA…
Must install client with the IP address of the FOG Server instead of the DNS name since the cert authority ties to the ip address when it dish’s the cert out to the client.