Issue Capturing HP ELite Desk 800G3 on version 6213
-
I dont’ want to, but i will if i have to.
I will upgrade tomorrow heres hoping there are no issues!
Thanks!
-
@eldiablo909 I will tell you that you WILL have issues. Now that you know you will have problems and that is out of the way, we are here to help you work through them.
I would also suggest that you update to the 1.4.0RC9 release of FOG (akin to 1.2.0 trunk releases). That one has the most fixes applied. There is an issue with 1.3.5 where under certain conditions single disk resizable function doesn’t work as expected. It only pops up under a specific condition. That condition was resolved in 1.4.0RC1.
-
Updating doesn’t hurt
As long as you have a backup by hand what could be lost? Nothing! except time. 
This one reason because i use my main fog instance within a vm with only less space, for my images i use a storage node (physical machine).Regards X23
-
@george1421 Fair, i’m going to see about doing this upgrade. Just gotta find the guide and the files now. Any pointers?
-
@eldiablo909 Follow the same process as the upgrade to trunk for 1.2.0.
https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk
sudo -i git clone https://github.com/FOGProject/fogproject.git /opt/fogproject cd /opt/fogproject git checkout dev-branch cd bin ./installfog.sh -
@george1421 You know, i get better support outta this free software than most paid apps.
you guys fkin rule.
I’m goin to try this out now i’ll post back with updates!
-
@eldiablo909 said in Issue Capturing HP ELite Desk 800G3 on version 6213:
You know, i get better support outta this free software than most paid apps.
Yes better than tier 1 paid support
-
@george1421 Legit. You’re 100% on point.
-
So the update has been going for a while… currently sitting on “Updating Packages as needed” and has been like that for the past 10 min or so. I don’t think it’s stuck… i hope it’s not stuck…
-
@eldiablo909 Ok, it completed… a bit scary waiting while it said that but it’s done. Looks like it worked DB upgrade and all was successful. Just about to test that elitedesk 800 again.
-
@eldiablo909 It worked!! Thanks for the tips and help you guys are the shit!
-
@eldiablo909 Nice you got everything back online and running.
Don’t forget to consider the fog project during your yearly budgeting. All donations are welcome to support such a great product and it helps keep the development team supplied with cookies and soda pop.
-
@george1421 Beer
-
@x23piracy said in Issue Capturing HP ELite Desk 800G3 on version 6213:
@george1421 Beer
Too much Beer == very sloppy code.
