windows could not complete the installation
-
@MattPayerle said in windows could not complete the installation:
Nothing popped out at me on the tasklist, but happy to paste it or upload it.
Please paste it, use the code-wrapping tool.
-
Sounds good, pasted below.
Not sure if this would matter, but I selected all of the images to be Single disk, resizable every time, but since windows 7 has that 100 mb partition up front, would that cause an issue here? I went ahead and created an image for multi parition non resizable and am capturing and will deploy later on tonight. I noticed when I booted my test VM that the hard drive was nearly full at almost 9 gigs when I had originally given it 45. So I’m wondering if something happened there. Also, since it was a VM, I was booting originally from the ISO from the datastore, and I forgot to disconnect and remove the ISO connection before capturing. I’ll try removing this as well and re-capturing in a few different formats and redeploying to see if one of those (either partitions or iso/dvd) was causing some problems while you all review the task list
Thanks again!Image Name PID Session Name Session# Mem Usage Status User Name CPU Time Window Title ========================= ======== ================ =========== ============ =============== ================================================== ============ ======================================================================== System Idle Process 0 Services 0 24 K Unknown NT AUTHORITY\SYSTEM 0:03:18 N/A System 4 Services 0 604 K Unknown NT AUTHORITY\SYSTEM 0:00:07 N/A smss.exe 232 Services 0 1,092 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A csrss.exe 308 Services 0 3,592 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A wininit.exe 336 Services 0 4,368 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A csrss.exe 352 Console 1 4,048 K Running NT AUTHORITY\SYSTEM 0:00:00 N/A winlogon.exe 384 Console 1 5,716 K Running NT AUTHORITY\SYSTEM 0:00:00 FirstUXWnd services.exe 436 Services 0 8,180 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A lsass.exe 460 Services 0 10,448 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A lsm.exe 468 Services 0 3,604 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A svchost.exe 580 Services 0 8,872 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A svchost.exe 652 Services 0 6,332 K Unknown NT AUTHORITY\NETWORK SERVICE 0:00:00 N/A windeploy.exe 728 Console 1 8,388 K Running NT AUTHORITY\SYSTEM 0:00:00 Install Windows sppsvc.exe 824 Services 0 10,740 K Unknown NT AUTHORITY\NETWORK SERVICE 0:00:01 N/A svchost.exe 864 Services 0 42,704 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A svchost.exe 888 Services 0 33,628 K Unknown NT AUTHORITY\SYSTEM 0:00:02 N/A svchost.exe 924 Services 0 13,156 K Unknown NT AUTHORITY\LOCAL SERVICE 0:00:00 N/A svchost.exe 108 Services 0 10,784 K Unknown NT AUTHORITY\LOCAL SERVICE 0:00:00 N/A svchost.exe 316 Services 0 29,184 K Unknown NT AUTHORITY\NETWORK SERVICE 0:00:00 N/A spoolsv.exe 1116 Services 0 4,060 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A svchost.exe 1144 Services 0 12,144 K Unknown NT AUTHORITY\LOCAL SERVICE 0:00:00 N/A WmiPrvSE.exe 1856 Services 0 8,668 K Unknown NT AUTHORITY\NETWORK SERVICE 0:00:00 N/A svchost.exe 1912 Services 0 7,720 K Unknown NT AUTHORITY\LOCAL SERVICE 0:00:00 N/A SearchIndexer.exe 1976 Services 0 23,028 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A SearchProtocolHost.exe 1252 Services 0 7,316 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A SearchFilterHost.exe 1204 Services 0 4,620 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A cmd.exe 1612 Console 1 2,924 K Running NT AUTHORITY\SYSTEM 0:00:00 Administrator: C:\Windows\system32\cmd.exe - tasklist /v conhost.exe 1000 Console 1 4,832 K Running NT AUTHORITY\SYSTEM 0:00:00 OleMainThreadWndName TrustedInstaller.exe 1708 Services 0 20,612 K Unknown NT AUTHORITY\SYSTEM 0:00:03 N/A VSSVC.exe 1760 Services 0 12,244 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A svchost.exe 1972 Services 0 5,472 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A tasklist.exe 2248 Console 1 5,508 K Unknown NT AUTHORITY\SYSTEM 0:00:00 N/A -
TrustedInstaller.exeis suspect. But, it could be any of these processes. Some I recognize, some I don’t. For example, it’s notwinlogin.exeorlsass.exeorsvchost.exeorcmd.exe -
@george1421 Ok, Tried these steps, and no matter what, it still threw the error at the end.
Good news out of all of this is I finally got a full log file in the Panther folder that shows items from today. It has several hundred lines, so I would rather not paste it here to avoid a lengthy post, anyway I can upload it here?
-
@MattPayerle You could use a site like http://pastebin.com/. Copy/Paste the log there and then provide the URL.
-
@Avaryan Thank you, sometimes the simple answers are easiest to forget
-
Ok, so I am about to shove rusted forks into my eyeballs. In short, this issue is resolved, but I don’t know what it is.
Whilst waiting and testing, I decided to take some time and work on polishing my reference image. I installed the fog client, a couple of other applications. I changed my unattend.xml to activate the built in administrator account, gave it a password, and did some other small adjustments to a SetupComplete file that didn’t exist in the first place, because I didn’t think it needed to be there if it didn’t serve much purpose at the time, especially for just a blank OS to be dropped.
Anyway, thank you all for your help and knowledge through this process. Feel free to mark solved, or at least solved (not a FOG issue).
-
@MattPayerle Thats great you have it working (sort of).
I’m sure you know this already, but I will state it again. Make sure the FOG service is disabled in your reference image before you sysprep it. Then use the setupcomplete.cmd file and sc to reenable the service. That keeps the fog client from starting its job too soon in the OOBE process. -
Thanks, yes, I didn’t even have it installed until last night, and I did disable it and have it re-enable in the new system. I like 1.3 because it shows up as a pending host automatically which is awesome. Just need to get name changing working from the Fog server and I’ll be set.
Thanks again everyone!
-
How do you properly verify if the FOG service is disabled.
-
@bc601 There is a section in the FOG Client page on the wiki that talks about what needs to be done if you install the fog client before you sysprep it here: https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_with_Sysprep
Or you can install the fog client post imaging using the msi and the setupcomplete.cmd file. Two ways to go about it to get the same results.
