FOG menu not showing up on some machines after DHCP server rebuild

[Quazz]

@Jay-Bosworth What OS and what version are you running?

Also, Wayne is right, so check that out asap.

[Jay Bosworth]

Ubuntu 14.04.5 LTS

I have only ever setup one DHCP server. As I stated it is a new build so the settings are exactly what is called for in the FOG setup.

Option 66 pointing to my FOG Server Option 67 pointing to undionly.kpxe

[Quazz]

@Jay-Bosworth Are you sure there’s no DHCP running on your FOG server?

Check by

sudo service isc-dhcp-server stop

[Jay Bosworth]

unrecognized service.

[Jay Bosworth]

I ran service --status-all and DHCP doesn’t even show up in the list so I don’t think it is the FOG server. It is somewhere else, still trying to figure out how I can track it down.

[Quazz]

@Jay-Bosworth How about

service dnsmasq status

?

[Wayne Workman]

@Jay-Bosworth said in FOG menu not showing up on some machines after DHCP server rebuild:

I have only ever setup one DHCP server.

Then you might have a rogue DHCP server somewhere.
The fact is - the only time anyone has ever reported having to manually enter a TFTP address for FOG network booting - is when there are 2 or more DHCP servers operating on that broadcast domain, and at least one is misconfigured. And we’ve had people ask about this many times. It’s always the same case.

This tool explained here would help you:
http://www.cyberciti.biz/faq/linux-unix-dhcpdump-monitor-dhcp-traffic/

Or you can run wireshark on your desktop with the bootp filter to watch DHCP broadcasts.

[Jay Bosworth]

Also unrecognized, I am close to shutting down the port that the rogue DHCP server is on. I will update once that is done and I test some more.

[Wayne Workman]

@Jay-Bosworth Rogue dhcp server is confirmed? You found it?

[Jay Bosworth]

Yes, I am pretty sure it belonged to the county health dept who has a satellite office in our district.

[Jay Bosworth]

Thanks to all who participated in this thread. I killed the switch port that someone had a Netgear router hooked up to and everything is working fine now. FOG menu is showing up. I haven’t tried pulling down an image yet, but I have a good feeling. I will do my best to up-vote the proper answers even the earlier posts questioning the possibility of multiple DHCP servers. I had a feeling one was out there, but I didn’t think it would have a such a huge impact on FOG. Again thanks everyone for all the help!