PXE boot issue
-
Hello I’m new to this form and new to Ubuntu. With a lot of help I configured my own( version 1.2.0) FOG server but can’t seem to PXE boot to the server. Here’s the error message:" Could not start download: Operation not supported /3c892003". What I have seen on-line the error has something to do with timing out. again I’m very new to Ubuntu and FOG software. Any help would be great!!
-
Can you provide a photo of the error? And what version of Ubuntu?
-
thanks for the quick response; Ubuntu 14.04.4 LTS
-
@cnbgeren Did you change the fog server’s IP after installation?
-
it is very possible that my co-work could have changed it.
-
@cnbgeren What do you have listed for dhcp options 66 {next-server] and 67 {bootfile}?
It looks like the ipxe kernel is getting to the target computer, its just not taking the next step.
It would be interesting to know if the IP address listed in /tftpboot/default.ipxe (on the fog server) is inline with the current IP address of your FOG server.
Also it would be interested to know what the output of this browser request is:
http://<fog_server_ip>/fog/service/ipxe/boot.php?mac=00:00:00:00:00:00
Please paste the output page here.
-
sorry for sounding dumb but when I run /tftpboot/default.ipxe from the command line I get permission is denied, I,m I doing the command correctly? As far as my browser request I have nothing after the PHP
-
@cnbgeren try
cat /tftpboot/default.ipxe
-
imageserver@imageserver-HP-Compaq-Pro-4300-SFF-PC:~$ cat /tftpboot/default.ipxe
#!ipxe
cpuid --ext 29 && set arch x86_64 || set arch i386
params
param mac0 ${net0/mac}
param arch ${arch}
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain http://192.168.1.4/fog/service/ipxe/boot.php##paramsimageserver@imageserver-HP-Compaq-Pro-4300-SFF-PC:~$
-
This post is deleted! -
@cnbgeren said in PXE boot issue:
My DNS IP address looks to be different then what is shown in the boot file. Could that cause the error?
-
@cnbgeren not sure I understand. Is the IP address of your fog server 192.168.1.4?
If you are unsure you can use the “ip addr show” command.
-
I’m not sure if this is what your looking for. Thanks again for helping a newbie out
#!ipxe
cpuid --ext 29 && set arch x86_64 || set arch i386
colour --rgb 0xff6600 2
cpair --foreground 7 --background 2 2
console --picture http://192.168.1.4/fog/service/ipxe/bg.png --left 100 --right 80
:MENU
menu
colour --rgb 0xff0000 0
cpair --foreground 0 3
item --gap Host is NOT registered!
item --gap – -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.sysinfo Client System Information (Compatibility)
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
exit || goto MENU
:fog.memtest
kernel memdisk iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.5 keymap= web=192.168.1.4/fog/ consoleblank=0 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.5 keymap= web=192.168.1.4/fog/ consoleblank=0 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.sysinfo
kernel bzImage32 root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns=192.168.1.5 keymap= web=192.168.1.4/fog/ consoleblank=0 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
autoboot -
@cnbgeren But what is the server’s IP address?
ip addr show
-
I just troubleshot this error. This is because of the DHCP service not having option 66 and option 67 configured. See this image.
The inside highlighted value for option 66 should be the static IP address that you are setting your FOG server on.
Option 67 should be (most commonly) undionly.kpxe
You can also make sure that the DHCP service is started on your server, and that TFTP is enabled on your windows machine(s).
I recommend following this guide, as it helped me tons. https://wiki.fogproject.org/wiki/index.php?title=FOG_on_an_Isolated_Network
-
@cnbgeren We have seen this happening with weird DHCP setups. Please make sure you have only one DHCP server answering within your subnet! As well you might want to try out FOG trunk as we are pretty close to a new release and many things have changed since version 1.2.0! See here on how to install trunk: https://wiki.fogproject.org/wiki/index.php?title=Upgrade_to_trunk
-
192.168.1.4
-
The dns you see in the output of the file has nothing to do with the issue you’re seeing.
-
@cnbgeren Please update to the latest. I suspect you’re seeing the old tftp/no-tftp issue. At least as far as I can tell.
-
I just installed this version of fog software this weekend. would I still need to update?