FOG Client 0.11.3 - no config.json file

[Wayne Workman]

@Developers I’m suspicious of the hashing functionality at the moment.

[Junkhacker]

@Wayne-Workman are you still able to upload snapins that are not snapinpacks?

[Tom Elliott]

@Wayne-Workman the upload isn’t working let’s figure that out first. Hashing is checked when the snapin checks in. A 0 size file hash is being returned

[Tom Elliott]

If i had to guess its specific to ftp timeout during the transfer .

[Wayne Workman]

@Tom-Elliott That would make sense. I’ll start researching that.

[Tom Elliott]

@Wayne-Workman it’s configurable in fog settings

[Wayne Workman]

@Junkhacker Just tested with a 1.6MB file, it worked.

[Wayne Workman]

@Tom-Elliott It was set to 90. I changed it to 900 and tried again, didn’t work. Then I rebooted the server and tried again, didn’t work.

[Tom Elliott]

@Wayne-Workman https://www.sitepoint.com/upload-large-files-in-php/

It’s somewhat involved sure but I think some of the suggested items may also be pertinent. Particularly input and execution time .

[Tom Elliott]

Just surmising it’s returned after a specific time like 30 seconds

[Wayne Workman]

@Tom-Elliott max_input_time is not defined, max_execution_time is set to 30. I’ll change all these to 900 and try again.

[Wayne Workman]

@Tom-Elliott No luck.

[Tom Elliott]

@Wayne-Workman how fast is it returning? Is it a specific interval? Is it possible firewall blocking due to size ?

[Wayne Workman]

@Tom-Elliott After clicking the “update” button at the bottom of the snapin, it takes approx. 50 seconds until the message at the top displays “Snapin updated”. During that time, I can see percentage progress in the bottom left corner of Chrome.

[Tom Elliott]

@Wayne-Workman the progress on chrome only shows to the tmp location on the server it’s uploading to. This is typically loaded to /tmp on the file system. Is there enough space to that file system?

[Tom Elliott]

@Wayne-Workman based on the replied posting here tmpfs only has 2.0G. Could you try a smaller large file just to see if this is the issue?

[Wayne Workman]

@Tom-Elliott If that’s the case, I will rebuild this server. I’ll try a 1GB-ish file soon.

[Tom Elliott]

@Wayne-Workman going to guess a bit further the upload gets to about 80% when it returns?

[Wayne Workman]

@Tom-Elliott No sir, it goes all the way. It hesitates for just the slightest moment at 99% and then says completed.

[Tom Elliott]

@Wayne-Workman that’s okay I’m just guessing anyway. I am thinking this is the issue then with the 0 size file.