How work the fog storage (nodes, groups, replication ...)
-
There are a few things there.
For your windows storage node you must have more than just nfs services installed. You also need to have the ftp services running and configured properly for full function.
Images are captured to the master node. The master node will replicate its images and snapins to all storage nodes in its storage group. For example lets say your HQ is in London, and you have two remote locations New York and Madrid. All three locations are in the same storage group. When a new image is added at the London location, fog replication will move the images to the other two location. In this configuration the location plugin is typically used so you can allocate storage nodes to a location and then host computers to those same location. With the location plugin in place computers booting in New York location will image using the storage node in New York and not the Master Node in London. It is quite a brilliant setup.
Images are replicated from the master node to the storage nodes using ftp. With the ftp that is used in FOG a max bandwidth can be defined so that fog replication doesn’t consume your entire network bandwidth for image movements. This is the requirement for ftp with your windows storage node.
You have to remember that a storage node is a slave node (windows or linux) there is no gui and everything has to be done from the master node. You do get extra functionality if you use an official FOG storage node that is not available with a windows storage node, but windows will work at a minimum level.
-
@george1421
Hello George,Thank you for your explanations. So, if i understand well, fog replication isn’t a plugin? its already installed with basic configuration with master and slaves nodes? And, in my case with my windows server just acting as a nfs storage node, there is no replication because its node defined as a real fog storage node, just an external storage so i don’t have all the features like fog replication?
@x23piracy
This is a good context that shows this picture. Any questions: where the queue size is defined? when i upload an image on a storage group, it’s stored first on master node defined, then automatically replicated on all the others storage nodes? (like my first question to george, is fog replication basically installed & configured with fog)Thanks you guys! Knowing of fog operations will help me to locate the problems much easier.
-
@arnaudrigole yes it’s there out of the box. the only thing needed is a group with at least to storage destinations (master & storage node) (storage node & storage node):
If you want separate storage location you have to create a storage group with at least one storage node or another master.
Regards X23
-
@arnaudrigole You are right fog replication isn’t a plugin it is built into the system. What IS a plugin that you will probably want is the location plugin. That allows you to assign storage nodes and client computers together by site. But storage nodes and master nodes are part of FOG 1.2.0 trunk build (maybe 1.2.0 stable but I haven’t used that in over 1.5 years).
Just for clarity the target computers speak to the storage nodes (master or slave) over NFS. The master and storage nodes replicate with FTP.
I started to put together a tutorial on setting up a 2012 server as a storage node. I ran into an issue and then the developers added some code to make it work. But, I haven’t had time to finish the document because of my work schedule. Here is the basics of what has to be setup to make a windows slave storage node. https://forums.fogproject.org/topic/6941/windows-server-as-fog-storage-node-reboot
I understand you are using 2008 R2 server so some of the powershell commands won’t work, but you should see what needs to be done. Once you have FTP server installed and setup correctly on the windows storage node the images should replicate even if you don’t have the NFS part setup.Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!
-
@arnaudrigole said:
(like my first question to george, is fog replication basically installed & configured with fog)
When FOG is setup replicated is installed and configured for the Master node only. When you add a FOG storage node then the slaves are configured as part of the setup process. When you add a Windows slave storage node then you have to setup the storage node configuration on the Master node by hand.
-
@george1421
George, could you explain how to do that powershell cmds in 2008r2? or maybe with graphic interface?Set-ItemProperty "IIS:\Sites\FOGFtpSite" -Name ftpServer.security.ssl.controlChannelPolicy -Value 0 Set-ItemProperty "IIS:\Sites\FOGFtpSite" -Name ftpServer.security.ssl.dataChannelPolicy -Value 0 Set-ItemProperty "IIS:\Sites\FOGFtpSite" -Name ftpServer.security.authentication.basicAuthentication.enabled -Value $true Set-ItemProperty "IIS:\Sites\FOGFtpSite" -Name ftpserver.userisolation.mode -Value 4 Add-WebConfiguration "/system.ftpServer/security/authorization" -value @{accessType="Allow";roles="fog_users";permissions="Read,Write";users=""} -PSPath IIS:\ -location "FOGFtpSite" Restart-WebItem "IIS:\Sites\FOGFtpSite" -
-
@x23piracy
I don’t understand? i have to setup the ftp server on windows 2008r2, which isn’t a client of fog
And again the powershell file will not work on 2008r2 which is radically different of 2012
-
@arnaudrigole oh sorry i thought you would like to execute it after client imaging
-
@x23piracy
I’m just searching how to make my setup work …
Need to store images on that f****g 2008r2 and its really HARD! Currently, my problem is located on image upload: when the upload task finish, the .Img files stay on /images/dev/mac@ddrs/ and they don’t move in /images/imagenamedefinedonwebguiSome people of fog support told me that its an ftp issue, (FTP to transfer /images/dev on /images , why don’t use a simply CP cmd, in local situation???) and i don’t understand why. It will be never resolved, because i think nobody understand (my fault maybe, i don’t write english very well) my configuration and issues i encounter :(((! I needed to write over 7 or 8 threads for the same issue, each time we resolve 1 step, but each next step i encounter another issue !!..
-
-
I translated the 2012 instruction to Windows 2008 commands. I have not tested these commands yet, but in general they should configure a windows 2008 server into a FOG storage node.
https://forums.fogproject.org/topic/6941/windows-server-as-fog-storage-node-reboot/9
-
@arnaudrigole said :
Some people of fog support told me that its an ftp issue, (FTP to transfer /images/dev on /images , why don’t use a simply CP cmd, in local situation???)
You have to remember the brains for FOG is on the FOG Master node. Consider if your storage node is located in another city connected via MPLS. A copy command issued by the FOG master node, would transfer the image from the storage node /images/dev/macaddr to the master node and then from the master node to /images/{fog_sys_name}. Now with FOG using ftp, the FOG master node connectes to the storagenode via FTP and then issues the move command via ftp. The FTP Server (in this case the storage node) just moves the file locally and no network traffic is generated. Once the move is complete the FOG server verifies the move and then disconnects.
-
@george1421
Oh ok, thanks for the precisions.Let’s work about ftp issues!
Thank you for your work george, appreciate it !!!
I’ll try it and keep you up. -
This might help:
https://wiki.fogproject.org/wiki/index.php?title=Location_Plugin
