FOG Snapin Client download error

Joe Schmitt

Redirecting ping to @Tom-Elliott, this is most likely a server issue.

Sebastian Roth

…Section=ResponseHeader Detail=“Content-Length”-Headerwert ist ungültig…

This translates to “value of Content-Length header is invalid”! Possibly .Net does not like such a big value??

Timo

Good Morning, this MOrning i’ve updated to latest GIT 7242. Now when i try to download the Snapin via Basic Task “Single Snapin” it comes up in the Log with " Unable to hash file, The file is too long. This process currently only supports files with a size of less than 2 GB.

So i think at this time it is not possible… !!!

Timo

@Sebastian-Roth said in FOG Snapin Client download error:

@Timo said:

…Section=ResponseHeader Detail=“Content-Length”-Headerwert ist ungültig…

This translates to “value of Content-Length header is invalid”! Possibly .Net does not like such a big value??

Is it possible to increase that? If so, where i can change that value?

Tom Elliott

@Timo Can you simply try updating? I removed the Content-Length setter in hopes that is all it takes to fix the issue at hand.

Timo

@Tom-Elliott said in FOG Snapin Client download error:

@Timo Can you simply try updating? I removed the Content-Length setter in hopes that is all it takes to fix the issue at hand.

I#ve just updated to 7246 via GIT, but unfortunately the same error in Log, unable to hash File, The file is too long. This process currently only supports files with a size of less than 2 GB.

Timo

GIT 7248 the same…just forgot one thing from the Error Log Service Error:“Object reference not set to an object instance”

Sebastian Roth

@Timo Can you please post the full error you see (line number, …). Maybe even post a picture.

Timo

Sure i can, thx for your help, i really appreciate it

Sebastian Roth

@Timo This seems to be a restriction in C# following the discussion here: http://www.codeproject.com/Questions/142532/appending-and-splitting-files-larger-than-gb

Possibly this is only happening because you have 32 bit Windows installed?? Please check! Or this might be a general restriction and we need to read large snapin files as chunks, @Jbob?

Timo

@Sebastian-Roth said in FOG Snapin Client download error:

@Timo This seems to be a restriction in C# following the discussion here: http://www.codeproject.com/Questions/142532/appending-and-splitting-files-larger-than-gb

Possibly this is only happening because you have 32 bit Windows installed?? Please check! Or this might be a general restriction and we need to read large snapin files as chunks, @Jbob?

Hi Sebastian, no the Client runs an Windows 7 x64 Installation

Joe Schmitt

@Timo the original header problem is fixed. @Sebastian-Roth is correct in that the hashing error is a limitation of c#. I’ll see what I can do.

Joe Schmitt

@Timo for now you could set the snapin file to a batch script which downloads the exe from a samaba share or something and runs it.

Timo

@Jbob said in FOG Snapin Client download error:

@Timo for now you could set the snapin file to a batch script which downloads the exe from a samaba share or something and runs it.

Hi Jbob thx for your help. How can i realize that? I’ve an Synology NAS where i can store that, do you have an example script, maybe?

Joe Schmitt

@Timo Batch lacks the ability to download a file natively. Here is a vbs script which should do what you are looking for.

Save the code as “Bootstrap.vbs”, and update the http://fog-server/MyProgram.exe line to reflect a real URL where your snapin can be downloaded, the easiest way may be to just copy your snapin file to /var/www/html/, and then it is accessible via http://{fog-server}/MyProgram.exe, where Myprogram.exe is the file name. Also update references to MyProgram.exe to your program’s file name.

Note that this code is untested.

Use the following snapin settings:
Snapin Run With: cscript
Snapin Run With Args: //B //Nologo
Snapin File: Bootstrap.vbs

Bootstrap.vbs code:

'http://www.robvanderwoude.com/vbstech_internet_download.php

HTTPDownload "http://fog-server/MyProgram.exe", "C:\"

Dim objShell
Set objShell = WScript.CreateObject( "WScript.Shell" )
objShell.Run("C:\MyProgram.exe")
Set objShell = Nothing


Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
fso.DeleteFile("C:\MyProgram.exe")
Set fso = Nothing


Sub HTTPDownload( myURL, myPath )
' This Sub downloads the FILE specified in myURL to the path specified in myPath.
'
' myURL must always end with a file name
' myPath may be a directory or a file name; in either case the directory must exist
'
' Written by Rob van der Woude
' http://www.robvanderwoude.com
'
' Based on a script found on the Thai Visa forum
' http://www.thaivisa.com/forum/index.php?showtopic=21832

    ' Standard housekeeping
    Dim i, objFile, objFSO, objHTTP, strFile, strMsg
    Const ForReading = 1, ForWriting = 2, ForAppending = 8

    ' Create a File System Object
    Set objFSO = CreateObject( "Scripting.FileSystemObject" )

    ' Check if the specified target file or folder exists,
    ' and build the fully qualified path of the target file
    If objFSO.FolderExists( myPath ) Then
        strFile = objFSO.BuildPath( myPath, Mid( myURL, InStrRev( myURL, "/" ) + 1 ) )
    ElseIf objFSO.FolderExists( Left( myPath, InStrRev( myPath, "\" ) - 1 ) ) Then
        strFile = myPath
    Else
        WScript.Echo "ERROR: Target folder not found."
        Exit Sub
    End If

    ' Create or open the target file
    Set objFile = objFSO.OpenTextFile( strFile, ForWriting, True )

    ' Create an HTTP object
    Set objHTTP = CreateObject( "WinHttp.WinHttpRequest.5.1" )

    ' Download the specified URL
    objHTTP.Open "GET", myURL, False
    objHTTP.Send

    ' Write the downloaded byte stream to the target file
    For i = 1 To LenB( objHTTP.ResponseBody )
        objFile.Write Chr( AscB( MidB( objHTTP.ResponseBody, i, 1 ) ) )
    Next

    ' Close the target file
    objFile.Close( )
End Sub

Wayne Workman

I’d opt for a batch file still as a stop-gap.

use xcopy to get the file. it supports UNC paths.

Timo

@Jbob said in FOG Snapin Client download error:

@Timo Batch lacks the ability to download a file natively. Here is a vbs script which should do what you are looking for.

Save the code as “Bootstrap.vbs”, and update the http://fog-server/MyProgram.exe line to reflect a real URL where your snapin can be downloaded, the easiest way may be to just copy your snapin file to /var/www/html/, and then it is accessible via http://{fog-server}/MyProgram.exe, where Myprogram.exe is the file name. Also update references to MyProgram.exe to your program’s file name.

Note that this code is untested.

Use the following snapin settings:
Snapin Run With: cscript
Snapin Run With Args: //B //Nologo
Snapin File: Bootstrap.vbs

Bootstrap.vbs code:

'http://www.robvanderwoude.com/vbstech_internet_download.php

HTTPDownload "http://fog-server/MyProgram.exe", "C:\"

Dim objShell
Set objShell = WScript.CreateObject( "WScript.Shell" )
objShell.Run("C:\MyProgram.exe")
Set objShell = Nothing


Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
fso.DeleteFile("C:\MyProgram.exe")
Set fso = Nothing


Sub HTTPDownload( myURL, myPath )
' This Sub downloads the FILE specified in myURL to the path specified in myPath.
'
' myURL must always end with a file name
' myPath may be a directory or a file name; in either case the directory must exist
'
' Written by Rob van der Woude
' http://www.robvanderwoude.com
'
' Based on a script found on the Thai Visa forum
' http://www.thaivisa.com/forum/index.php?showtopic=21832

    ' Standard housekeeping
    Dim i, objFile, objFSO, objHTTP, strFile, strMsg
    Const ForReading = 1, ForWriting = 2, ForAppending = 8

    ' Create a File System Object
    Set objFSO = CreateObject( "Scripting.FileSystemObject" )

    ' Check if the specified target file or folder exists,
    ' and build the fully qualified path of the target file
    If objFSO.FolderExists( myPath ) Then
        strFile = objFSO.BuildPath( myPath, Mid( myURL, InStrRev( myURL, "/" ) + 1 ) )
    ElseIf objFSO.FolderExists( Left( myPath, InStrRev( myPath, "\" ) - 1 ) ) Then
        strFile = myPath
    Else
        WScript.Echo "ERROR: Target folder not found."
        Exit Sub
    End If

    ' Create or open the target file
    Set objFile = objFSO.OpenTextFile( strFile, ForWriting, True )

    ' Create an HTTP object
    Set objHTTP = CreateObject( "WinHttp.WinHttpRequest.5.1" )

    ' Download the specified URL
    objHTTP.Open "GET", myURL, False
    objHTTP.Send

    ' Write the downloaded byte stream to the target file
    For i = 1 To LenB( objHTTP.ResponseBody )
        objFile.Write Chr( AscB( MidB( objHTTP.ResponseBody, i, 1 ) ) )
    Next

    ' Close the target file
    objFile.Close( )
End Sub

Hi there, at this moment i’m trying your script but i think it hangs in the download it now takes over 10 minutes, but i have no status window what is happening. The download from my fogserver manually tested runs fine

Timo

If i run it on the Client in an Dos box , with cscript bootstrap.vbs it comes up with an error after a few seconds "WinHttp.WinHttpRequest: For this operation is not enough memory available But has enough free Memory (60GB)

Tom Elliott

@Timo memory is not disk space. It sounds, to me, like it’s trying to put the whole file in ram. You may need to have the script copy the file locally then run it from the local machine.

Joe Schmitt

@Timo v0.10 allows for hashing large files. When it is released, can you confirm that the issue is fixed?

FOG Snapin Client download error

174

12.0k

17.3k

155.2k