iPXE boot problem
-
But can you download it using tftp client from another machine?? Why should iPXE say “No such file or directory” if it is there!? Please follow the troubleshoting guide and let us know if all the steps work.
-
@Sebastian-Roth
Hello,All the machines have this message error, I tried on 4-5 machines … I followed the troubleshooting guide, all the steps work but I still have the message error. I don’t understand why … The message error talks about a non-existent file that i have on the server.
-
Could you please take a picture of the error screen. Sometimes it’s somewhere in the details and we just cannot find the needle in the stack by asking questions.
-
-
Can you please try this undionly.kpxe? See here for more details about this binary: https://forums.fogproject.org/topic/4973/default-ipxe-connection-timeout-on-dell-only/6
-
Thank you very much, it works now but i have this message error before :
https://www.dropbox.com/s/20df005b7rzx6f7/IMG_3760.JPG?dl=0 (Sorry i can’t download the picture here, too big)
Is it important ?
-
@Bcetinkaya What happens after that?
-
The installation begins, but i have an error message : “no image in PartClone” but it continues and it fogs the machine
-
@Bcetinkaya Can you take a photo of that error, the “no image in partclone” message?
-
I took some pictures, i put the links below :
https://www.dropbox.com/s/omwhathmz63flij/Photo 28-01-16 15 15 49.jpg?dl=0
https://www.dropbox.com/s/kf930uxroz9apqr/Photo 28-01-16 15 19 20.jpg?dl=0
https://www.dropbox.com/s/yw23vjhrxgwwefp/Photo 28-01-16 15 19 26.jpg?dl=0
https://www.dropbox.com/s/j0n61wxh52754v9/Photo 28-01-16 15 19 32.jpg?dl=0
https://www.dropbox.com/s/d7b5i9yj2i4a5z4/Photo 28-01-16 15 19 40.jpg?dl=0
But after that it continues :
https://www.dropbox.com/s/bb5b9l0fig037qi/Photo 28-01-16 15 19 44.jpg?dl=0
-
The red and green messages you see when booting are iPXE debug messages. You can just ignore those for the moment! Works like a charm as we see.
The error “This is not partclone image” does not sound very healthy. I guess the image is corrupt. Can you run this command on the FOG server
ls -al /images/mikreleaseup
and post the output here. Anyhow, I guess it would be a good idea to capture this image from your host again. When and how was this image created? -
I don’t have /images directory … The image is an upload of a master, you think the image is corrupted ?
-
Well at least the second partition seams to have an issue.
Where are you images stored then?? /images is the default path used by FOG.
-
This post is deleted! -
OK I found the directory it was /opt/images
[root@fog ~]# cd /opt/images
[root@fog images]# ls -al
total 40
drwxrwxrwx 9 fog root 4096 Jan 28 16:17 .
drwxr-xr-x 12 root root 4096 Dec 24 11:27 …
drwxr-xr-x 2 root root 4096 Jan 8 17:39 DELLPRECISIONWIN7V4c
drwxrwxrwx 2 fog root 4096 Jan 28 16:17 dev
drwxrwxrwx 2 root root 4096 Jun 9 2015 mikrelease310
drwxrwxrwx 2 root root 4096 Dec 9 16:39 mikrelease310render
drwxrwxrwx 2 root root 4096 Jan 28 16:16 MikreleaseTEST
drwxrwxrwx 2 root root 4096 Dec 9 16:19 mikreleaseup
-rw-r–r-- 1 root root 0 Jan 24 2014 .mntcheck
drwxrwxrwx 2 root root 4096 Nov 27 2014 w7milpcmasterI uploaded a new Image from a Master (MikreleaseTEST) but i still have the message error for the 2nd partition…
-
And you don’t see any errors while uploading the image again?? Please show us what you have in those directories
ls -al /opt/images/MikreleaseTEST /opt/images/mikreleaseup
-
no message error when I uploaded the image again …
[root@fog ~]# ls -al /opt/images/mikreleaseup
total 149280
drwxrwxrwx 2 root root 4096 Dec 9 16:19 .
drwxrwxrwx 8 fog root 4096 Jan 28 17:01 …
-rwxrwxrwx 1 root root 0 Dec 9 16:18 d1.has_grub
-rwxrwxrwx 1 root root 1048576 Dec 9 16:18 d1.mbr
-rwxrwxrwx 1 root root 111009518 Dec 9 16:18 d1p1.img
-rwxrwxrwx 1 root root 20 Dec 9 16:18 d1p2.img
-rwxrwxrwx 1 root root 40625085 Dec 9 16:19 d1p4.img[root@fog ~]# ls -al /opt/images/MikreleaseTEST/
total 151012
drwxrwxrwx 2 root root 4096 Jan 29 09:06 .
drwxrwxrwx 9 fog root 4096 Jan 29 09:06 …
-rwxrwxrwx 1 root root 0 Jan 29 09:05 d1.has_grub
-rwxrwxrwx 1 root root 1048576 Jan 29 09:05 d1.mbr
-rwxrwxrwx 1 root root 111009517 Jan 29 09:05 d1p1.img
-rwxrwxrwx 1 root root 20 Jan 29 09:05 d1p2.img
-rwxrwxrwx 1 root root 42394069 Jan 29 09:06 d1p4.img -
Why is partition two image file (d1p2.img) really small?? And why is d1p3.img missing? What does your partition scheme on this client machine look like? I am confused.
Has uploading and downloading an image ever worked with this machine? I doubt it.
-
I have no problem with the machine I uploaded the image, I can show you all the partitions in the computer with a “df -h” :
there is no /dev/sda3,I suppose that’s why there is no d1p3. img file in /opt/images/****Filesystem Size Used Avail Use% Mounted on
/dev/sda2 39G 11G 26G 29% /
devtmpfs 32G 0 32G 0% /dev
tmpfs 32G 0 32G 0% /dev/shm
tmpfs 32G 1.2M 32G 1% /run
tmpfs 32G 0 32G 0% /sys/fs/cgroup
/dev/sda4 189G 102M 180G 1% /datas
/dev/sda1 477M 114M 335M 26% /boot
nas.fx.fr:/apps/ 300G 262G 39G 88% /s/apps
nas.fx.fr:/xchange 100G 1.4G 99G 2% /s/xchange
nas.fx.fr:/Prods 36T 34T 3.0T 92% /s/prods -
Showing the partitions with fdisk would be more interesting. Can you please run
fdisk -l /dev/sda
as root on this system and post the output here?df
shows that /dev/sda2 is mounted as the root partition (/). So this is a really important part af your system and should not be only a few kilobyte as an image file. What do you see when uploading an image when partclone is coming up with /dev/sda2?? Does it take several minutes or just skipping away in seconds?