Surface 3 Fails to Image
-
@wwarsin said:
I upgraded to SVN 5798 and am still using the Microsoft Model 1663 network adapter.
Whenever you upgrade you are using the current official FOG trunk kernel which does not have the patch included (to add the mentioned IDs).
Probably good if you can take a video of the screen so we might have a chance to see if there is an error and when exactly things go wrong. As I don’t have a surface device I need your assistance to figure this out. But it looks like we are making progress. At least we seam to have networking up again - maybe only part of the time, not sure why?!
-
@Sebastian-Roth I assume bzimage is the kernel? I downloaded this file after I upgraded to the newest SVN - I’ll hold off on upgraded fog until this is resolved.
I’m out the rest of this week (food poisoning ) but will take a video of the surface next week.
-
@wwarsin Sorry for my late reply. Have been without internet for some days. Hope you are better again!
Yes, bzImage is the kernel. Re-download and put in correct path (/var/www …) if you have upgraded. But there shouldn’t be a need to upgrade right now if you don’t see other issues. Probably best if you don’t to hopefully have more stable test results.
Looking forward to the video.
-
I’m finally back in the office for a few days! Here’s the video: https://youtu.be/UFYNan98lmw This is with the Vanilla bzimage.
-
@wwarsin Looking at the last few lines of output it seams a bit like FOG doesn’t find any partitions on your device. It says “Saving Partition Tables (GTP)” and then “Task complete” straight way.
Can you please run a debug session on the surface and see what you get fromlsblk
-
-
@wwarsin I am really sorry that it seams like we have just been turning in circles! But I might have an idea of what is wrong here now. Spent a long time closely looking at the pictures and videos you posted and I might have found something.
Picture and video show version 5798 (FOG boot logo message) which FOG polls from the server. But later on it says “Re-reading Partition Tables”. As far as I could find out in the code repository this string was changed in version 5752. So I am pretty sure you have version 5798 installed on the server but your init files did not get updated on the last upgrade - so the clients booting up use an older version.
Please try this on your FOG server (as root!):
cd /var/www/fog/service/ipxe mv init.xz init.xz_old wget https://fogproject.org/inits/init.xz chown www-data:www-data init.xz
Then try booting your surface again. Hopefully this will make a difference!
Tom has changed the disk/partition enumeration from
lsblk
tofdisk
lately. So I am really keen to see if this is working on your device out of the box. Looking forward to hearing from you! -
Success! It’s capturing the image now!
I’ll write back a little later, i’m going to try a deploy after this finishes to verify it works completely.
I appreciate all of the help you and Tom have been!
-
@Sebastian-Roth
So close! Now i’m getting the following error when i try to deploy:Checking write caching status on HDD…Failed
Could not set caching status (enableWriteCache)
Edit: I still have “/dev/mmcblk0” set as the Host Primary Disk
-
@Tom-Elliott I think center alignment of those pieces in that picture below don’t look very good. I suggest making only the initial logo/credits box be centered, and everything else left aligned.
-
@wwarsin Great! Can you please run another debug session and let us know what you get from
hdparm -i /dev/mmcblk0
Yeah, pretty close we are indeed!
-
Here’s the output of the command:
# hdparm -i /dev/mmcblk0 /dev/mmcblk0: HDIO_DRIVE_CMD(identify) failed: Invalid argument HDIO_Get_IDENTITY failed: Invalid argument #
-
@Sebastian-Roth Any updates by chance?
-
@wwarsin Interestingly we got fog 1.2.0 to image a Surface 3 the other day. I couldn’t understand why trunk wouldn’t work
Have you updated recently and tried again?
-
@wwarsin Thanks for reminding me on this! Can you please go for another debug session and run hdparm with a different parameter to see how this behaves:
hdparm -W /dev/mmcblk0
-
@Sebastian-Roth I’m using the streams on this, and they’re running into the exact same problem with the mmcblk0 drive.
after running both hdparm -i and hdparm -W i was getting failed invalid argument. -
@drc0nc Thanks for letting me know! @Tom-Elliott Seams like we need to look into this again and find a way to check for writeCache without it failing on mmcblk devices. Any ideas? Maybe check the return code of hdparm?
-
@Sebastian-Roth the write cache problem was only a warning, but I did come up with a fix I think anyway. There was no error code returned that showed there was or wasn’t a problem, so the fix I’ve added is to check the variable we store the check in. If the value has write cache with a value of not supported or is blank we won’t try enabling write support to begin with.
-
-
@Sebastian-Roth Works just fine now! thanks guys…