Hardware router dhcp enabled

pabloinza

Tomorrow I’ll post my dnsmasq file. Now, when you say “firewall off”, you mean my Tplink router’s firewall? Isn’t any specific port to open and forward in the Tplink router, in order to make this work, and avoid turning off all the firewall completely?

Wayne Workman

@pabloinza said:

Tomorrow I’ll post my dnsmasq file. Now, when you say “firewall off”, you mean my Tplink router’s firewall? Isn’t any specific port to open and forward in the Tplink router, in order to make this work, and avoid turning off all the firewall completely?

The Firewall on your FOG server.

pabloinza

@Wayne-Workman. Okay, but how come? The escenario works great if I disconnect the tplink router, connect all pc to a standard switch, and set the fog server pc as dhcp server; and there I don’t turn off anything, I don’t need to touch the fog server, default installation. So, why the need to touch its firewall?

pabloinza

@Wayne-Workman Here is my ltsp.conf file:

- Sample configuration for dnsmasq to function as a proxyDHCP server,
- enabling LTSP clients to boot when an external, unmodifiable DHCP
- server is present.
- The main dnsmasq configuration is in /etc/dnsmasq.conf;
- the contents of this script are added to the main configuration.
- You may modify the file to suit your needs.



- Don't function as a DNS server:
port=0

- Log lots of extra information about DHCP transactions.
log-dhcp

- Dnsmasq can also function as a TFTP server. You may uninstall
- tftpd-hpa if you like, and uncomment the next line:
- enable-tftp

- Set the root directory for files available via FTP.
tftp-root=/tftpboot

- The boot filename.
dhcp-boot=pxelinux.0

- rootpath option, for NFS
dhcp-option=17,/images

- kill multicast
dhcp-option=vendor:PXEClient,6,2b

- Disable re-use of the DHCP servername and filename fields as extra
- option space. That's to avoid confusing some old or broken DHCP clients.
dhcp-no-override

- PXE menu.  The first part is the text displayed to the user.  The second is the timeout, in seconds.
pxe-prompt="Press F8 for boot menu", 3

- The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86,
- Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI
- This option is first and will be the default if there is no input from the user.
pxe-service=X86PC, "Boot from network", pxelinux

- A boot service type of 0 is special, and will abort the
- net boot procedure and continue booting from local media.
pxe-service=X86PC, "Boot from local hard disk", 0

- If an integer boot service type, rather than a basename is given, then the
- PXE client will search for a suitable boot service for that type on the
- network. This search may be done by multicast or broadcast, or direct to a
- server if its IP address is provided.
- pxe-service=x86PC, "Install windows from RIS server", 1

- This range(s) is for the public interface, where dnsmasq functions
- as a proxy DHCP server providing boot information but no IP leases.
- Any ip in the subnet will do, so you may just put your server NIC ip here.
- Since dnsmasq is not providing true DHCP services, you do not want it
- handing out IP addresses.  Just put your servers IP address for the interface
- that is connected to the network on which the FOG clients exist.
- If this setting is incorrect, the dnsmasq may not start, rendering
- your proxyDHCP ineffective.
dhcp-range=10.10.10.101,proxy

- This range(s) is for the private network on 2-NIC servers,
- where dnsmasq functions as a normal DHCP server, providing IP leases.
- dhcp-range=192.168.0.20,192.168.0.250,8h

- For static client IPs, and only for the private subnets,
- you may put entries like this:
- dhcp-host=00:20:e0:3b:13:af,10.160.31.111,client111,infinite

Mod edited to use code box

pabloinza

@Wayne-Workman Here is the screen capture of a pxe clien during boot process. This is the farther point I could reach

And if I change pxelinux.0 by undionly.kpxe, then it says “tftp file timeout, pxe file not found”

Wayne Workman

@pabloinza I always recommend turning off the firewall for troubleshooting - it’s one less thing in the mix.

Also, you’re problem is that you have dnsmasq configured to use pxelinux.0 when you should be using undionly.kpxe or undionly.kkpxe

pabloinza

@Wayne-Workman Yes Wayne, I suppose that. In fact, I read that in this forum. But with my pour knowledge about Linux and all of this, I can´t achieve this. Would you please type for me the EXACT lines I need to put in my ltsp.conf file, and in any other place what ever I need to type or add or delete?

pabloinza

@Wayne-Workman I´ve tried changing the line:

dhcp-boot=pxelinux.0
to
dhcp-boot=undionly.kpxe
and then the clients say “tftp file not found”

Wayne Workman

@pabloinza said:

@Wayne-Workman I´ve tried changing the line:

dhcp-boot=pxelinux.0
to

dhcp-boot=undionly.kpxe
and then the clients say “tftp file not found”

You should tell it to use undionly.0
This is due to some bug somewhere… we aren’t sure if it’s a dnsmasq issue or a tftp issue or a FOG issue.

After setting dnsmasq to undionly.0, you would then copy (or symbolically link) the undionly.kpxe file to undionly.0

These files are located here:
/tftpboot/undionly.kpxe

At home, I just make a copy. But if you can figure out how to make a symbolic link work, then the installer will preserve this each time you upgrade.

You can copy like this:
cp /tftpboot/undionly.kpxe /tftpboot/undionly.0

You might find it educational to read through this thread: https://forums.fogproject.org/topic/5425/proxydhcp-issue
This person has a different issue than you, but a whole lot of stuff about dnsmasq is covered in there.

pabloinza

@Wayne-Workman Wayne!!..Ah ah!!..Savior of the Universe! Finally the solution! It finally works! I think the error is an issue of dnsmasq, since when I tried all of this stuff configuring Fog server machine as dhcp server, all worked fine, and in the dhcpd.conf file, the proper line said “undionly.kpxe”. So, I think dnsmasq is who´s mistaking the name of the file.
Well, what ever, it works!
Thanks a lot my friend! I really appreciate your help.
I don´t know how to tag this post as “SOLVED”. Would you please tell me?

Hardware router dhcp enabled

200

11.6k

17.1k

154.6k