Failed to create deployment tasks for the following Hosts Hosts do not have Uniformed Image assignm

KJ You

I just upgrade from .32 to 1.2.0
group->ist all group->defaul->basic task->multicast->crete multi-cast gives me this message
Failed to create deployment tasks for the following Hosts
Hosts do not have Uniformed Image assignments
Please help!

Wayne Workman

Please post your installation log. It’s here: /var/log/foginstall.log

What OS are you running, what version?

KJ You

ubuntu 12.04 LTS

Script started on Wed 06 May 2015 11:41:50 AM CDT
Ubuntu

    ..#######:.    ..,#,..     .::##::.

.:###### .:;####:…;#;…
…##… …##;,;##::::.##…
,# …##…##:::## …::
## .::###,##. . ##.::#.:######::.
…##:::###::…#. … .#…#. #…#:::.
…:####:… …##…##::## … #
# . …##:,;##;:::#: … ##…
.# . .:;####;::::.##:::;#:…
# …:;###…

###########################################

FOG

Free Computer Imaging Solution

[url]http://www.fogproject.org/[/url]

Developers:

Chuck Syperski

Jian Zhang

Peter Gilchrist

Tom Elliott

GNU GPL Version 3

###########################################

Version: 1.2.0 Installer/Updater

Found FOG Settings from previous install at: /opt/fog/.fogsettings
Performing upgrade using these settings…

Starting Debian / Ubuntu / Kubuntu / Edubuntu Installtion.

Would you like to donate computer resources to the FOG Project
to mine cryptocurrency? This will only take place during active
tasks and should NOT have any impact on performance of your
imaging or other tasks. The currency will be used to pay for
FOG Project expenses and to support the core developers working
on the project. For more information see:

[url]http://fogproject.org/?q=cryptocurrency[/url]

Would you like to donate computer resources to the FOG Project? [y/N] n

#####################################################################

FOG now has everything it needs to setup your server, but please
understand that this script will overwrite any setting you may
have setup for services like DHCP, apache, pxe, tftp, and NFS.

It is not recommended that you install this on a production system
as this script modifies many of your system settings.

This script should be run by the root user on Redhat or with sudo on Ubuntu.

** Notice ** Redhat users will need to disable SELinux and iptables in
order to use FOG
Please see our wiki for more information at [url]http://www.fogproject.org/wiki[/url]

Here are the settings FOG will use:
Base Linux: Debian
Detected Linux Distribution: Ubuntu
Installation Type: Normal Server
Server IP Address: 10.0.168.6
DHCP router Address: 10.0.168.1
DHCP DNS Address: 10.0.168.6
Interface: eth0
Using FOG DHCP: 0
Internationalization: 0
Donate: 0

     DHCP will NOT be setup but you must setup your 
     current DHCP server to use FOG for PXE services. 

     On a Linux DHCP server you must set: 
         next-server 

     On a Windows DHCP server you must set: 
         option 066 & 067 

       Option 066 is the IP of the FOG Server: (e.g. 10.0.168.6) 
       Option 067 is the undionly.kpxe file: (e.g. undionly.kpxe)

Are you sure you wish to continue (Y/N) y

Installation Started…

Installing required packages, if this fails
make sure you have an active internet connection.

Preparing apt-get
Installing package: apache2
Installing package: php5
Installing package: php5-json
Installing package: php5-gd
Installing package: php5-cli
Installing package: php5-mysql
Installing package: php5-curl
Installing package: mysql-server

We are about to install MySQL Server on
this server, if MySQL isn’t installed already
you will be prompted for a root password.

Press enter to acknowledge this message.

Reading package lists…
Building dependency tree…
Reading state information…
The following packages were automatically installed and are no longer required:
gir1.2-ubuntuoneui-3.0 libubuntuoneui-3.0-1 thunderbird-globalmenu
Use ‘apt-get autoremove’ to remove them.
The following packages will be upgraded:
mysql-server
1 upgraded, 0 newly installed, 0 to remove and 306 not upgraded.
Need to get 11.2 kB of archives.
After this operation, 1,024 B of additional disk space will be used.
Get:1 [url]http://us.archive.ubuntu.com/ubuntu/[/url] precise-updates/main mysql-server all 5.5.43-0ubuntu0.12.04.1 [11.2 kB]
Fetched 11.2 kB in 0s (82.4 kB/s)
(Reading database … (Reading database … 5% (Reading database … 10% (Reading database … 15% (Reading database … 20% (Reading database … 25% (Reading database … 30% (Reading database … 35% (Reading database … 40% (Reading database … 45% (Reading database … 50% (Reading database … 55% (Reading database … 60% (Reading database … 65% (Reading database … 70% (Reading database … 75% (Reading database … 80% (Reading database … 85% (Reading database … 90% (Reading database … 95% (Reading database … 100% (Reading database … 176172 files and directories currently installed.)
Preparing to replace mysql-server 5.5.35-0ubuntu0.12.04.2 (using …/mysql-server_5.5.43-0ubuntu0.12.04.1_all.deb) …
Unpacking replacement mysql-server …
Setting up mysql-server (5.5.43-0ubuntu0.12.04.1) …

Installing package: mysql-client
Installing package: tftpd-hpa
Installing package: tftp-hpa
Installing package: nfs-kernel-server
Installing package: vsftpd
Installing package: net-tools
Installing package: wget
Installing package: xinetd
Installing package: sysv-rc-conf
Installing package: tar
Installing package: gzip
Installing package: build-essential
Installing package: cpp
Installing package: gcc
Installing package: g++
Installing package: m4
Installing package: htmldoc
Installing package: lftp
Installing package: openssh-server
Installing package: php-gettext
Installing package: clamav-freshclam

Confirming package installation.

Checking package: apache2…OK
Checking package: php5…OK
Checking package: php5-json…OK
Checking package: php5-gd…OK
Checking package: php5-cli…OK
Checking package: php5-mysql…OK
Checking package: php5-curl…OK
Checking package: mysql-server…OK
Checking package: mysql-client…OK
Checking package: tftpd-hpa…OK
Checking package: tftp-hpa…OK
Checking package: nfs-kernel-server…OK
Checking package: vsftpd…OK
Checking package: net-tools…OK
Checking package: wget…OK
Checking package: xinetd…OK
Checking package: sysv-rc-conf…OK
Checking package: tar…OK
Checking package: gzip…OK
Checking package: build-essential…OK
Checking package: cpp…OK
Checking package: gcc…OK
Checking package: g++…OK
Checking package: m4…OK
Checking package: htmldoc…OK
Checking package: lftp…OK
Checking package: openssh-server…OK
Checking package: php-gettext…OK
Checking package: clamav-freshclam…OK

Configuring services.

Setting up and starting MySql…OK
Backing up user reports…OK
Setting up and starting Apache Web Server…OK
You still need to install/update your database schema.
This can be done by opening a web browser and going to:

[url]http://10.0.168.6/fog/management[/url]

Press [Enter] key when database is updated/installed.

Configuring Fresh Clam…OK
Setting up storage…OK
Setting up and starting DHCP Server…Skipped
Setting up and starting TFTP and PXE Servers…OK
Setting up and starting VSFTP Server…OK
Setting up sudo settings…OK
Setting up FOG Snapins…OK
Setting up and building UDPCast…OK
Installing init scripts…OK
Setting up FOG Services…OK
Starting FOG Multicast Management Server…OK
Starting FOG Image Replicator Server…OK
Starting FOG Task Scheduler Server…OK
Setting up FOG Utils…OK

Would you like to notify the FOG group about this installation?
* This information is only used to help the FOG group determine
if FOG is being used. This information helps to let us know
if we should keep improving this product.

Send notification? (Y/N)y

Thank you, sending notification…Done

Setup complete!

You can now login to the FOG Management Portal using
the information listed below. The login information
is only if this is the first install.

This can be done by opening a web browser and going to:

  [url]http://10.0.168.6/fog/management[/url] 

  Default User: 
         Username: fog 
         Password: password

Script done on Wed 06 May 2015 12:07:08 PM CDT

Wayne Workman

are the images assigned to these hosts the same?

KJ You

yes
[quote=“Wayne Workman, post: 46915, member: 28155”]are the images assigned to these hosts the same?[/quote]

KJ You

group->ist all group->defaul->basic task->multicast->crete multi-cast

is this right way to do multicasting?

used to be under task management.

need2

Don’t create duplicate posts/threads.

KJ You

This post is deleted!

KJ You

[quote=“need2, post: 46922, member: 21891”]Don’t create duplicate posts/threads.[/quote]
sorry

Wayne Workman

[quote=“KJ You, post: 46920, member: 22149”]group->ist all group->defaul->basic task->multicast->crete multi-cast

is this right way to do multicasting?

used to be under task management.[/quote]

The clients must be in a group, and then you’d pick basic task, multicast, create multicast. So I think you’re doing it correctly.

KJ You

upload seems to be working ok .
what I need is to download existing images to the group of 10 machine.
I can get to image management->list all images-> pick a image-> and bottom of the screen see :the selection box below will add this image to the selected hosts automatically" and select multiple host.
is this how I do multicast download??
Thanks for you help!

KJ You

ok, I am getting close…
now hosts are stuck on “Please wait…”
i tried these but same issue.
sudo service FOGMulticastManager stop
sudo killall udp-sender
sudo killall udp-sender
sudo killall udp-sender
sudo service FOGMulticastManager start

Wayne Workman

Are your images marked as partimage, or are they partclone ? Older FOG used partimage, I believe. New FOG uses partclone, but still supports partimage.

When you get this going, you should look at converting all your old images to the new format (deploy image, then just take the image again).

You’re trying to multicast… Lets see if an individual unicastt download works, first???

Wayne Workman

Check the permissions on your /images directory. It should be owned by Fog, and Fog should have rwx permissions. See this for info on permissions: [url]http://fogproject.org/wiki/index.php/Troubleshoot_FTP#Permissions[/url]

Also make sure

KJ You

How to check partition type please?

Wayne Workman

[quote=“KJ You, post: 46994, member: 22149”]How to check partition type please?[/quote]

[url=“/_imported_xf_attachments/1/1982_image type.png?:”]image type.png[/url]

KJ You

mine doesn’t show “format” column

Wayne Workman

[quote=“KJ You, post: 46997, member: 22149”]mine doesn’t show “format” column[/quote]

I apologize… that might only be there for the newer developmental releases…

if you click on an image itself, on the left, it should show the image type. And there might even be an option somewhere in 1.2.0 settings to let you support older image formats… not sure… I’ve never used 1.2.0 in production. I use the developmental releases only, because Tom made a change in them to allow FOG to work in my environment.