Intel UNDI Stuck Initializing
-
The screenshot you posted,
There should be a message after that… it will only show briefly.
Can you take a video, and then play back and pause on that message? And then tell us what it says? -
[quote=“Wayne Workman, post: 45310, member: 28155”]The screenshot you posted,
There should be a message after that… it will only show briefly.
Can you take a video, and then play back and pause on that message? And then tell us what it says?[/quote]
No message shows. It just sits there with a blinking cursor. It does not go past that point in the image.EDIT: If we set it to use the undionly.pxe versus .kpxe it loops back to the boot device screen but there is still no screen with a message.
-
[quote=“SeqSupport@Edkey, post: 45311, member: 27616”]No message shows. It just sits there with a blinking cursor. It does not go past that point in the image.
EDIT: If we set it to use the undionly.pxe versus .kpxe it loops back to the boot device screen but there is still no screen with a message.[/quote]
Try every file that doesn’t have a .efi extension. Let us know.
Also, what is running DHCP? Are you using dnsmasq ?
-
We have a windows server that runs our DHCP. We are not using dnsmasq. All of the ipxe.pxe/kpxe/kkpxe produce the initializing device issue. The undionly.kkpxe produces the initializing device issue as well and the undionly.kpxe makes it past the initializing device but gets stuck at the screen of the image I posted. This laptop is the only laptop we have had problems with so far from Lenovo. Every other machine we have works just fine with fog and undionly.kkpxe.
-
Optionally,
You can also turn UEFI back on, and try every .efi file.
You might have better luck than I did.
-
[quote=“Wayne Workman, post: 45318, member: 28155”]Optionally,
You can also turn UEFI back on, and try every .efi file.
You might have better luck than I did.[/quote]
Alright I will try this next.
-
No luck. Tom do you have any suggestions?
-
Odd to say it, but it looks like it’s trying to process the files. Simple processing, yet being stuck piecing it back together. Maybe you could try using proxyDHCP to see if it will work?
-
I’ve got code for that… (thanks Tom)
FOR THE RECORD, I like to document stuff… even if you know a lot about Linux (I don’t), I try to write things as if I’m helping someone who’s never used Linux in their life…
Debian 7
Empty out options 066 and 067 on your DHCP server.
For each file you want to try (highly recommend using either undionly.kpxe or ipxe.efi), you need to either symbolically link the file to FILENAME.0, or just copy it… they are so small anyways so I just copy them…
so… for undionly.kpxe:
[CODE]cp /tftpboot/undionly.kpxe /tftpboot/undionly.0[/CODE]Then, you’ll need to configure dnsmasq (otherwise known as ProxyDHCP)
[CODE]vi /etc/dnsmasq.conf[/CODE][CODE]port=0
log-dhcp
tftp-root=/tftpboot
dhcp-boot=undionly.0,x.x.x.x,x.x.x.x
dhcp-option=17,/images
dhcp-option=vendor:PXEClient,6,2b
dhcp-no-override
pxe-prompt=“Press F8 for boot menu”, 3
pxe-service=X86PC, “Boot from network”, undionly
pxe-service=X86PC, “Boot from local hard disk”, 0
dhcp-range=x.x.x.x,proxy[/CODE]Change all the ‘sets’ of x’s to your FOG server’s IP. Note the line: dhcp-boot=undionly.0 You need to change the filename here for each one you try, in addition to making a copy of the ACTUAL file as /tftpboot/FILENAME.0 and then restart dnsmasq.
Quick reference for basic editing in vi:
i = go into insert mode, here you may use arrows to navigate text, and edit it with the keyboard as normal.
Esc (the escape key) = exit insert modeWHEN NOT in insert mode you may use
:w (then enter) = write changes.
:q (then enter) = exit vi
:q! (then enter) = exit vi without saving changes.Restart dnsmasq:
[CODE]/etc/init.d/dnsmasq restart[/CODE]Enable / Disable dnsmasq on boot:
[CODE]update-rc.d dnsmasq defaults[/CODE]
Or if using dependency boot:
[CODE]insserv -d dnsmasq[/CODE] -
So iPXE is initializing the device but we don’t know which one it is. I tried to find out which NIC is in that 11e and it took me at least 20 minutes. I really hate all those websites where you read “Tech specs… CPU … Gigabit-Ethernet …”!! No NIC brand or model name, arrgh!
Found it: Should be RTL8111/8168B, right?? This NIC is should be supported by iPXE from what I can see in the source code. Seems like we need mode debugging to get this working. The easier step (I think) is to capture a packet dump to see if iPXE is sending any packets after initializing the device. The first packet should be a broadcast (DHCP request) so you should see it everywhere on your network. Please install wireshark on one of your PCs, connect it to the same net with FOG server and client and capture while booting up the 11e Thinkpad. You should see DHCP request when the NIC itself greps an IP first, then iPXE comes up. Do you see another DHCP request after that??
Second, you need to build a custom iPXE binary with debug enabled. I just added a section to the existing wiki article about debugging, see here: [url]http://fogproject.org/wiki/index.php/Building_undionly.kpxe#Debugging[/url]
In your case I’d start with adding ‘DEBUG=undi,dhcp’. Hopefully you can see where it stucks. Please post a picture of it.
I really wonder why ipxe.kpxe is not working for you. To explain: undionly uses the general UNDI interface to communicate with the NIC. If you want to use real iPXE drivers you need to use one of the ipxe.xxx binaries. You can give that a try with debugging enabled (DEBUG=realtek) too!!
Edit: I just found a couple of threads about iPXE and realtek 8111… Most are saying that they got it working with that NIC.
[url]http://fogproject.org/forum/threads/realtek-8111-8168-undionly-kpxe-hangs-on-initialising-devices.10453/[/url]
[url]http://lists.ipxe.org/pipermail/ipxe-devel/2014-October/003837.html[/url] -
[quote=“Uncle Frank, post: 45333, member: 28116”]So iPXE is initializing the device but we don’t know which one it is. I tried to find out which NIC is in that 11e and it took me at least 20 minutes. I really hate all those websites where you read “Tech specs… CPU … Gigabit-Ethernet …”!! No NIC brand or model name, arrgh!
Found it: Should be RTL8111/8168B, right?? This NIC is should be supported by iPXE from what I can see in the source code. Seems like we need mode debugging to get this working. The easier step (I think) is to capture a packet dump to see if iPXE is sending any packets after initializing the device. The first packet should be a broadcast (DHCP request) so you should see it everywhere on your network. Please install wireshark on one of your PCs, connect it to the same net with FOG server and client and capture while booting up the 11e Thinkpad. You should see DHCP request when the NIC itself greps an IP first, then iPXE comes up. Do you see another DHCP request after that??
Second, you need to build a custom iPXE binary with debug enabled. I just added a section to the existing wiki article about debugging, see here: [url]http://fogproject.org/wiki/index.php/Building_undionly.kpxe#Debugging[/url]
In your case I’d start with adding ‘DEBUG=undi,dhcp’. Hopefully you can see where it stucks. Please post a picture of it.
I really wonder why ipxe.kpxe is not working for you. To explain: undionly uses the general UNDI interface to communicate with the NIC. If you want to use real iPXE drivers you need to use one of the ipxe.xxx binaries. You can give that a try with debugging enabled (DEBUG=realtek) too!!
Edit: I just found a couple of threads about iPXE and realtek 8111… Most are saying that they got it working with that NIC.
[url]http://fogproject.org/forum/threads/realtek-8111-8168-undionly-kpxe-hangs-on-initialising-devices.10453/[/url]
[url]http://lists.ipxe.org/pipermail/ipxe-devel/2014-October/003837.html[/url][/quote]Once I have created a debug kpxe where does the debug file get dropped?
-
It get’s placed in the /tftpboot directory as the replacement to the originally named file.
For example. If you’re building the undionly.kpxe debug built file, you would copy the fresh built undionly.kpxe to your /tftpboot/undionly.kpxe.
Hopefully that helps.
-
[quote=“SeqSupport@Edkey, post: 45387, member: 27616”]Once I have created a debug kpxe where does the debug file get dropped?[/quote]
Not sure if understand your question. As Tom already noted, place the compiled binary into your TFTP root directory. If you were asking where the debug output will end up! That you will see right on the screen when booting up the client… no file output. -
[quote=“Uncle Frank, post: 45391, member: 28116”]Not sure if understand your question. As Tom already noted, place the compiled binary into your TFTP root directory. If you were asking where the debug output will end up! That you will see right on the screen when booting up the client… no file output.[/quote]
So we have figured out that there is an option in the bios that protects the memory from malicious attacks and that was blocking ipxe. But unfortunately it gets to configuring net0 and errors out with a 0x040ee119 now. Seeing what debug info I can get off of the undionly.kkpxe I built.
-
That means for some reason ipxe is not able to receive an IP address for that nic.
-
Also, do you have STP (Spanning Tree Protocol) on your network? If you do, is there anyway you can disable it or use Rapid STP/PortFast?
-
[quote=“Tom Elliott, post: 45394, member: 7271”]Also, do you have STP (Spanning Tree Protocol) on your network? If you do, is there anyway you can disable it or use Rapid STP/PortFast?[/quote]
I would have to speak to the boss about the network related issue. We started from scratch and have not updated to the newest SVN. Would this possibly make a difference? We did upgrade the tftpboot folder but that is all.
-
It could pose an issue, except it’s not getting far enough to get to the point of having an issue to begin with. It needs to get dhcp first.
-
Is it possible to connect DHCP (windows), FOG and the client to a small office switch just for testing?? If you don’t see a difference then we know it’s a real iPXE/FOG issue. But I am pretty sure you don’t run into DHCP timeout in a small setup.
To see what’s really going on you can use wireshark and tcpdump to capture the packets on the network.
Either you install wireshark on your windows DHCP server (not sure if you are allowed to do this but if might come in handy again). Or you can use a hub to connect in front of the client (your normal switch - hub - client) or configure a monitoring port on that switch where your client is connected.
Use a laptop to capture the traffic on that hub. You’ll see a lot of stuff, I am sure. Try display filters ‘bootp’ (DHCP) and ‘tftp’. You are welcome to upload the saved pcap file for us to inspect. -
[quote=“Uncle Frank, post: 45403, member: 28116”]Is it possible to connect DHCP (windows), FOG and the client to a small office switch just for testing?? If you don’t see a difference then we know it’s a real iPXE/FOG issue. But I am pretty sure you don’t run into DHCP timeout in a small setup.
To see what’s really going on you can use wireshark and tcpdump to capture the packets on the network.
Either you install wireshark on your windows DHCP server (not sure if you are allowed to do this but if might come in handy again). Or you can use a hub to connect in front of the client (your normal switch - hub - client) or configure a monitoring port on that switch where your client is connected.
Use a laptop to capture the traffic on that hub. You’ll see a lot of stuff, I am sure. Try display filters ‘bootp’ (DHCP) and ‘tftp’. You are welcome to upload the saved pcap file for us to inspect.[/quote]We have a portable laptop we use as a fog server for imaging networks which do not have a dhcp server. We installed a fresh copy of Debian and Fog 1.2.0 and updated to the latest SVN. Tested both undionly.kkpxe and .kpxe plus .efi and uefi and still the same result. I will do a wireshark on the fog laptop and see what I get.
