SVN 3125 & Hyper-V 2012 R2

[sudburr]

Look up, look way up… and I’ll call Rusty.

[Wayne Workman]

Oh. He’s referring to the original problem.

He’s looking for a fix so he doesn’t have to keep using that older kernel.

[url]https://books.google.com/books?id=8ecUy98-WqYC&pg=PA22&lpg=PA22&dq=Look+up,+look+way+up…+and+I%27ll+call+Rusty.&source=bl&ots=kGRsj1wxUm&sig=os_6reV1bFJGNxURDuzYLypzBVY&hl=en&sa=X&ei=Hm8dVfXvCZbhoASVooD4AQ&ved=0CEUQ6AEwBg#v=onepage&q=Look%20up%2C%20look%20way%20up…%20and%20I’ll%20call%20Rusty.&f=false[/url]

[sudburr]

Yes, the Friendly Giant. Good times …

[Sebastian Roth]

Sure you haven’t changed IDE controller in hyper V somewhere along the way??
[url]http://superuser.com/questions/874084/how-identify-a-virtual-hard-disk-how-unique-in-linux[/url]

Possibly a major change in the kernel is causing this. But then, wouldn’t heaps of other people have issues with this then too?? Sorry, don’t have hyper V, so I cannot test this on my own. Just rumbling…

[Wayne Workman]

I haven’t updated to the latest revision of FOG in about a month.

Generally, I only update when Tom asks me to, LOL! Although I think that might change… I’m building FOG on Fedora 21 server at home, and I will stay bleeding edge with that for a while.

[sudburr]

The problem still exists for [B]Kernel: 3.19.3 .[/B]

[Tom Elliott]

What, exactly, is the problem?

Are you getting the same
[code]BUG: using smp_processor_id() in preemptible [00000000] code: hdparm/2312[/code]

Or is there another message?

Can you enable the FOG_KERNEL_DEBUG and increase the Console level?

[sudburr]

A quick test of Kernel 4.0.0 presents a new failure. BTW I’m still using SVN 3127.

/bzImage… ok
/init.xz… ok
tulip: Cannot enable tuilip board #0, aborting
piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Starting logging: OK
Populating /dev using udev: done
Initializing random number generator… done.
Starting network…
ip: RTNETLINK answers: File exists
ssh-keygen: generating new host keys: RSA1 RSA DSA ECDSA ED25519
Starting sshd: OK

< screen clears >
< Free Computer Imaging Solution banner page appears followed by >

An error has been detected!

Failed to initialize disk

Computer will reboot in 1 minute.

Actually… 4.0.0 presents this error on other physical machines as well.

Forgive my foggy response… burning off a migraine here, but how do I run debug for quick/full host registration?

[Tom Elliott]

Update to latest svn then tell me of issues.

[sudburr]

Updating now… brb. wheeee

[sudburr]

Okay, looks like I pulled down 3283 and I have a new option upon installation:

What MySQL connection type would you like?
MYSQLI_STORE_RESULT is normal
MYSQL_ASYNC is what is Defaulted and recommended
Any value not equal to MYSQLI_ASYNC and not blank will use store result

To answer, what did FOG set up prior to this?

[Tom Elliott]

It’s been a hoopla of trials. I recommend leaving it blank/MYSQL_ASYNC

[sudburr]

Continuing the install with MYSQLI_ASYNC …

– svn: 3283
[B]-- Kernel: 4.0.0[/B]
– iPXE: 1.0.0+ (eda1)

The problem has reverted to as described at the top of this thread for the Hyper-V 2012 R2 client.

Reverting to [B]Kernel: 3.18.5 .[/B]

[Wayne Workman]

I’m going to try to network boot a Hyper-V win7 just to see what happens…

I’ll attempt to register and upload an image.

[sudburr]

Running SVN3283 [B]Quick Host Register[/B] with 4.0.0 in debug elicits:

error: /dev/sda2: no such file or directory
udevd[2240]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory

• Using disk device … /dev/sda

• Starting host registration…

• Attempting to register host …
  … cr+lf over and over…

Running SVN3283 [B]Full Host Register[/B] with 4.0.0 in debug elicits the same messages as originally indicated.

[sudburr]

Wait a sec …

Hitting save at any time for any reason on the Fog Settings page sends me to:

[url]http://devfog/fog/management/index.php?node=about&sub=settings[/url]

[I]The website cannot display this page (HTTP 500)[/I]

This did happen when I initially tried to set debug, but thought it a random browser fault, and didn’t check to see if the setting stuck. It isn’t. I’ve tried again with the same result. I even tried just saving the unchanged settings page and get the same error.

[Tom Elliott]

What is specifying devfog as the rewrite URL?

[sudburr]

I’m not sure what you’re asking, but that’s the server name.

[sudburr]

Whether I access the fog server by IP or DNS name the result is the same.

[Tom Elliott]

If you’re getting a 500 there’s a coding problem somewhere, though I don’t know where. My guess, is it’s in the mcrypt functions. But this only happens when you hit save? Can you get us your error logs when this occurs?