Can't complete the fog install!
-
I last installed mysql without password, just blanks
plus what you suggest is not given in the user guide so how would I know (I’m not a server experienced person)
-
what do you mean it’s not in the userguid?
What guide, exactly, did you follow?
It looks like you have done whatever you think is correct based on other peoples ideas.
Rather than looking at what’s changed between versions, you went under an assumption to set mysql password in the /opt/fog/etc/config.php file (which won’t work)
You say it’s not there, but I want to know what you’re reading and failing to understand.
-
I found that I should change Listen 80 to Listen 0.0.0.0:80 in /etc/apache2/ports.conf
for that apache error, and restart it, but I still can’t access fog in web browser
-
Pls refer to top post! link to user guide for other versions of Linux - ie Debian. That’s what I followed, official fog pages right?
I only search for answers when problems happened, like not what was expected from following the guide.
-
You mean [url]http://www.fogproject.org/wiki/index.php/Installation_on_Debian_Lenny[/url]
Which is for 0.32 installation of Debian Lenny,
Not FOG 1.2.0 on Debian Wheezy?
-
Well, you are correct in that Lenny is not my release of Debian.
I got to that page from the front page of the User Guide here [url]http://fogproject.org/wiki/index.php/FOGUserGuide[/url]
link:
2 Installing FOG > 2.2 Installation on different distributions of Linux >> Debian > Debian Wheezy -
To be honest, the guide for say, Ubuntu 12.10, looks pretty much the same.
-
Look,
I’m trying to help, but I’m not getting very far. I know I’m coming off rude, but I’m trying to understand where you got the ideas to try the “tricks” you’ve tried while you’re blatently missing the idea of how to install fog following the “official” documentation.
FOG 1.x.x is fairly new and I’m the “new kid” on the block for the developement of anything 1.x.x and potentially further.
When I’m tryign to make suggestions it is in all honesty an attempt to assist a person out.
I really do want to know what and how you came to the troubleshooting things you did.
But to further add to my confusion:
If the guide (our official documentation as you put it) tells you to download 0.32 and install it using the following instructions, where do you get downloading something COMPLETELY different and attempting to install it?
-
Ok, no I didn’t copy the exact command that is on that page, because I know fog has developed pretty fast over 2014, so I downloaded straight from the link to sourceforge, the tar.gz, fog 1.2.0
-
thanks Tom, for doing your best to help, I’ve gotta go, its 2.37am here.
-
If you copied and pasted the exact information in that install guide that means you copied the example that was 0.32. Please see that wiki again after the resent update. It should be more clear.
[url]http://fogproject.org/wiki/index.php/Installation_on_Debian_Lenny[/url]
-
I’m back, @wolf
I said that i didn’t just cut and paste that install line for fog 0.32, I downloaded 1.2.0 from big bold link on the fog home page. That 0.32 no longer exists anyways!My problems: 1. Mysql failed to start during fog install… solution: I comment out bind-address
2. Cannot get to the fog management page when prompted to… Apache error log reports not connecting on 80
So I need a solution to this… it might be apache or mysql password - but I just installed mysql with blanks.Thanks
-
This morning, apache log does not report an error when trying to connect to fog management, only this
[Thu Feb 12 10:02:31 2015] [notice] Apache/2.2.22 (Debian) PHP/5.4.36-0+deb7u3 configured – resuming normal operations
[CODE]sudo lsof -i :80
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
chromium 4655 fog 155u IPv4 33318 0t0 TCP debian.local:46894->a125-252-236-186.deploy.akamaitechnologies.com:http (CLOSE_WAIT)
apache2 9661 root 3u IPv4 32521 0t0 TCP *:http (LISTEN)
apache2 9681 www-data 3u IPv4 32521 0t0 TCP *:http (LISTEN)
apache2 9682 www-data 3u IPv4 32521 0t0 TCP *:http (LISTEN)
apache2 9683 www-data 3u IPv4 32521 0t0 TCP *:http (LISTEN)
apache2 9684 www-data 3u IPv4 32521 0t0 TCP *:http (LISTEN)
apache2 9685 www-data 3u IPv4 32521 0t0 TCP *:http (LISTEN)[/CODE][CODE]sudo netstat -lnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 3601/mysqld
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1857/rpcbind
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 9661/apache2
…[/CODE] -
Today I re-installed Debian, and ran the fog install script - this time Mysql had no issue starting and I reached the fog management page.
the only thing I can think of last time that I had changed before installing fog was interfaces, I changed auto lo to auto eth0 -
I’m back again because, although I got to the fog management page, once I shifted the server off the internet, I couldn’t get there any more.
I really don’t understand IP settings much. When I ran the installer today, I answered yes to the suggested IP addresses, and got on, then move the pc to where we are making the network and couldn’t get into fog anymore.
I since found the user guide for installing for an isolated network and there it says to put in a static IP, and answer no to the next two IP questions. [url]http://www.fogproject.org/wiki/index.php/FOG_on_an_Isolated_Network[/url]
But with that method, I couldn’t get into the fog page.
-
So, if I use the automatic IP which the fog install script gives me, I can connect to the fog page.
But what do I do later on when I take the server off the internet/change network ??
-
Hi, I need some one to answer my question, if they could be a little patient!
My fog server IP was set up by the install script as [url]http://192.168.0.129[/url]
That was made because of connected to internet.
Now I want to go on isolated network, so how do I change the IP address? what to?
Note that installing using “isolated network” guide failed to let me connect to fog UI page.
OK, I can see the guide how to change the IP, in the fog settings, but I can’t find those other files to make changes.
can I use [url]http://192.168.1.1/[/url] ? but does the server IP need to change first? How do I do that??? I need step by step as I’m really tired!
Tahnks
-
I changed the IP as the guide shows, then restarted apache service
I login with [url]http://127.0.0.1/fog/[/url]
then it states Error contacting server - but that is with the ethernet internet pulled out
when I plugin again there’s “Estimated FOG sites: [B]4875”[/B]
-
Yeah
That’s expected. The contacting stuff goes out to the internet. If you unplug, you’re no longer on the internet.
-
alright then so thats just contacting the internet? if im unplugged it says server not found and I thought I needed the server!
Pls save me your sarcasm and look at my posts above. I need to set up isolated server. Are you really unwilling to offer help here?
