Adobe or Cute PDF printer

[Roger Saffle]

Just wanted to come back and post the solution…

1. install the CutePDF (or any PDF software printer) as normal
2. note the name of the port that was created by the install
3. grab drives for any PS printer. I used HP Color LaserJet 3800 PS
4. point the fog printer to that INF file and that port.

Boom. PDF printer

[Roger Saffle]

This is not working anymore. Client 0.10.6 . Says :
5/25/2016 10:42 AM Client-Info Client Version: 0.10.6
5/25/2016 10:42 AM Client-Info Client OS: Windows
5/25/2016 10:42 AM Client-Info Server Version: 7845
5/25/2016 10:42 AM Middleware::Response Success
5/25/2016 10:42 AM PrinterManager Adding printers
5/25/2016 10:42 AM PrinterManager HS MC Copier already exists
5/25/2016 10:42 AM Printer Attempting to add printer:
5/25/2016 10:42 AM Printer --> Name = PDF_Printer_10
5/25/2016 10:42 AM Printer --> IP = 10.95.95.100
5/25/2016 10:42 AM Printer --> Port = CPW2:
5/25/2016 10:42 AM Printer --> File = C:\ProgramData\drivers\HP\1215\HPCP1215.INF
5/25/2016 10:42 AM Printer --> Config =
5/25/2016 10:42 AM Printer --> Model = HP Color LaserJet CP1215
5/25/2016 10:42 AM Printer ERROR: Could not add
5/25/2016 10:42 AM Printer ERROR: Generic failure

I am using the same port as I did on the old fog client. Any idea what a Generic Failure is?

[Roger Saffle]

Seems to be the : , if i put in just the port with out the : it makes the port and installs. Of course that doesnt prompt to save. As soon as i put in the correct port name with the : i get the generic failure.

[Joe Schmitt]

@Roger-Saffle Adding : to a port makes it invalid. There’s nothing the client can do about the user entering a bad port.

[Roger Saffle]

Thanks for the feed back. I am 99.5% Positive it worked with the legacy for printer client. I know i pushed out Cute_PDF printers last year with it.

as you can see here, Windows does indeed add the : to its default PDF or XPS port name

Thanks again for the quick reply.

EDIT: It just dawned on me that maybe I need to do the install as a LOCAL printer? Cuz LPT1: has a : also this video shows adding the : after LPT1 http://freeghost.sourceforge.net/videotutorials/printer.swf Ill try tomorrow and post back.

[Roger Saffle]

Well that didnt work. “Lcoal” is not an option. So how would I even add a printer to LPT1: or File: since they both have : in them?

[Quazz]

@Roger-Saffle PDFCreator seems to use a printer port without :, so that might be worth checking out.

[Roger Saffle]

@Quazz do you use pdfcreator? Do you have a link. I tried a couple called PDFcreator. 1 had : in the ports, the other set off my AnitVirus.

[Quazz]

@Roger-Saffle You can get it through Ninite. Creates a port called pdfcmon

I have not tested printer managing any of that though, but it might be worth a shot.

[Joe Schmitt]

For the client not to remove a printer, only the name has to match whats on the server. So if you have some printer installed, (e.g. cutepdf), just make a printer on fog with the same name.

[Roger Saffle]

@Jbob Thanks a million! That worked. Just made sure CutePDF was on the image, then made a printer with the same name in fog, and BOOM fog kept the printer and did not delete it.

[Wayne Workman]

@Jbob said in Adobe or Cute PDF printer:

For the client not to remove a printer, only the name has to match whats on the server. So if you have some printer installed, (e.g. cutepdf), just make a printer on fog with the same name.

#wiki worthy

[Wayne Workman]

We need a wiki article on Printer Management.