Fog 0.32 Third Generation NTFS Driver problem



  • Hello Community

    Please if can any1 help me, i use fog 0.32 on Ubuntu i didn’t have a problem till now, i testing some new pc’s Fujitsu P910/920/720 and Lenovo M83, 1st problem i can’t register Host, and the 2nd one i register from an old pc … i put hard from Lenovo M83 and i was trying deploying image and i get error from attach.
    Can please some1 help me with a resolution? … Maybe a kernel udpate with steps for noobs (with all commands).

    PS: i will use 0.32 till 0.33 will be officialy release and no issues, and when i will find more tutorials for instalation xD

    I will be verry grateful.
    Thanks a lot!

    [url="/_imported_xf_attachments/0/702_20140502_172940.jpg?:"]20140502_172940.jpg[/url]



  • It was from Kernel in new FOG it’s solved this problem.
    Thanks!



  • No … and i was trying with other HDD from other PC on ACHI, IDE and works … but with hard from that system Lenovo ThinkCenter M83 S0BB0Q dosen’t work with FOG i don’t know why… and i have 2000 PC’s that i need to install WIN7 i don’t know what should i do to deploy image from FOG…


  • Developer

    [quote=“dOR1n, post: 26942, member: 19492”]Thanks Tom, like allways ur the best!

    I was looking in BIOS, and was on AHCI no RAID. When i put IDE it work’s but when i put Windows7 on IDE dosen’t work at boot when i try to login. :(

    PS: u need some info’s about this PC to put in your new kernel, maybe other will buy the same pc and have the same problem and maybe you can help us.

    WHAT IS THAT ERROR FROM IMAGE HOW I CAN RESOLVE?[/quote]

    What happens if after imaging you fix the setting in the bios back to AHCI? Will 7 boot then?



  • Thanks Tom, like allways ur the best!

    I was looking in BIOS, and was on AHCI no RAID. When i put IDE it work’s but when i put Windows7 on IDE dosen’t work at boot when i try to login. :(

    PS: u need some info’s about this PC to put in your new kernel, maybe other will buy the same pc and have the same problem and maybe you can help us.

    WHAT IS THAT ERROR FROM IMAGE HOW I CAN RESOLVE?

    [url="/_imported_xf_attachments/0/751_1.png?:"]1.png[/url]


  • Senior Developer

    [quote=“dOR1n, post: 26868, member: 19492”]There’s new photo’s with compatibility with fog and system information Tom. (Hope you can help me)
    PS: i’ve made the last kernel update but dosen’t work.[/quote]

    d0R1n,

    Those pictures are telling you that the hard drive is incompatible with FOG. I don’t know why, but my suspicion is it’s because of your BIOS setting for the SATA configuration. Maybe try IDE or AHCI? My guess is it’s currently setup as RAID which may explain why it’s not recognizing the drive in those systems.



  • There’s new photo’s with compatibility with fog and system information Tom. (Hope you can help me)
    PS: i’ve made the last kernel update but dosen’t work.

    [url="/_imported_xf_attachments/0/727_20140512_100419.jpg?:"]20140512_100419.jpg[/url][url="/_imported_xf_attachments/0/728_20140512_100503.jpg?:"]20140512_100503.jpg[/url][url="/_imported_xf_attachments/0/729_20140512_100518.jpg?:"]20140512_100518.jpg[/url][url="/_imported_xf_attachments/0/730_20140512_100527.jpg?:"]20140512_100527.jpg[/url][url="/_imported_xf_attachments/0/731_20140512_100537.jpg?:"]20140512_100537.jpg[/url][url="/_imported_xf_attachments/0/732_20140512_100545.jpg?:"]20140512_100545.jpg[/url][url="/_imported_xf_attachments/0/733_20140512_100618.jpg?:"]20140512_100618.jpg[/url]



  • Thanks like allways respect for you man, i have donate for this community job.
    I have two days free from work but when i will come i will give the right information that you ask for.

    PS: i have installed both version 0.32 and 1.0.0
    But on 0.32 i have eth0 at network, on 1.0.0 i don’t have eth0 is this a problem? (i follow all wiki and instruction from forum).
    Other problems that i’ve found on 1.0.0 i was trying with internet connection and without to join on http:XXX/fog/management and when i acces the page my pc is freezing and i need to restart. (After restart i try again and i need to wait some minutes when i click somewhere there ex: Options, Info, Host etc…) is this a bug or the problem is from me? On 0.32 on isolate network i can acces the page without network connection or internet. But on 1.0.0 i can’t. (SORRY FOR ENGLISH I HOPE YOU UNDERSTAND SMTH)


  • Senior Developer

    dOR1n,

    While I understand you’re under pressure, this is why you should check the compatibility of systems before just deciding that you’re going to work with them. I don’t have any of the models of systems you have so I have no means of testing things to see what I could possibly do to fix them. I agree that you need to resolve this, but therein-lies the problem. I don’t have these systems, and I don’t know if anybody else on these forums have these systems, so we can’t give you information specific to your case scenario.

    Did you upload an image from one of these machines that you’re trying to deploy to, or are you just trying to use a previously created image to push to these machines?

    What setup is the hard drive in? Is you BIOS UEFI enabled? Is the SATA Configuration IDE, RAID, or AHCI? Can you please do a system compatibility check? To do this, from the menu choose System Information, when it boots up it will ask you press a number relevant to what you’re trying to do. I believe the compatibility is option number 4. Is the hard drive actually recognized? The message you’re picture is describing is displaying that there’s no partition information written to the drive. It has nothing to mount which is the “error” you’re seeing. Basically it’s displaying a syntax error, not an error with ntfs-3g specifically, but it has no drive partition to attempt to mount. Besides that, it’s failing because there’s nothing actually being written to the hard drive. Therefore, the drive is “blank”.



  • Hi Tom

    1. i didn’t try running a compatibility check (because i don’t know how to do it).
    2. i want to make a deploy
    3. yes i have an image on fog and i want to deploy on pc to install windows

    I need support to resolve this! (i have 2000 new pc’s and i need to install windows7 on them to put in production) :(


  • Senior Developer

    The problem from the picture appears to be an issue with recognizing the HDD.

    Have you tried running a compatibility check on the drive? Are you trying to upload or deploy an image? Based on the picture, you’re trying to deploy an image to them. Do you have an image uploaded for them?



  • Yes i update kernel now i can register new model pc’s to host… but when i try to deploy image when fog check hard i got the same error… other way to solve my problem?

    PS: I’ve install fog 1.0.0 (a clean install) and i get the same s**t error… from picture, can some1 please tell me how i resolve this?



  • This post is deleted!

  • Moderator

    Have you…

    updated the kernel?

    EDIT: Just to jump Tom to the punch, kernel updates are best done from this info:

    [SIZE=12px]Kernel Issues: [/SIZE][URL=‘http://fogproject.org/wiki/index.php/FAQ’][SIZE=12px]http://fogproject.org/wiki/index.php/FAQ[/SIZE][/URL]


Log in to reply
 

425
Online

39.3k
Users

11.0k
Topics

104.4k
Posts

Looks like your connection to FOG Project was lost, please wait while we try to reconnect.