Error "driver Mdio-gpio Already Registered Aborting"
-
This post is deleted! -
So I tried to deploy and it is hung as well, same machine that I manually entered
-
Any other suggestions, I trie to remove the mdio-gpio file, not present.
-
Try my kernel, see my signature!
-
I am going to do a clone on the VM in the morning and then apply your updates in the link you sent. I appreciate your help and hope this solves the problem. We went with FOG because Clonezila which is good just would not work for us and if this does not work we would need to go to Ghost. Here’s hoping.
-
Getting a wrong boot kernel error
-
if you get past the point of downloading the init.gz and have a problem, it’s driver related and you probably just need a kernel with compatible drivers compiled in, such as Tom’s. Make a backup of your /tftpboot/fog/kernel/bzImage file and then copy the new file your downloaded to the same folder and rename it to bzImage
Then try to register the host again.
-
OK, I’ll try that. Since I am an Ubuntu noob, where do I get Tom’s kernel to download? Also what is the best commands to download and copy it over? I inherited the FOG server and am working through it, I am learning Ubuntu, is is the server so no GUI.
-
-
This post is deleted! -
When following the instructions for the download, in comes back unable to resolve host mastacontrola.com. I am connected to the internet, it is not resolving the address and was not able to ping without getting error not being able to resolve.
Where else can I d/l your kernel?
-
mastacontrola.com is up and running. Maybe your DNS provider is blocking this address?
I assure you it is up and running.
At any rate, you can download if from sourceforge site now.
[url]http://fogproject.org/forum/threads/fog-0-33b-not-boot-a-64-bit-machine.10311/#post-25300[/url]
-
I just checked the download links and they work fine for me.
Try:[COLOR=#000000][FONT=monospace][url]https://mastacontrola.com/fogboot/kernel/bzImage[/url][/FONT][/COLOR]
[FONT=monospace][url]https://mastacontrola.com/fogboot/kernel/bzImage32[/url][/FONT] -
[quote=“Tom Elliott, post: 25238, member: 7271”]Try my kernel, see my signature![/quote]
I’m getting error 403 forbidden. -
Tom’s site is down right now.
You can still get the kernel from here:
[SIZE=13px][FONT=arial][COLOR=#262626]svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/bzImage[/COLOR][/FONT][/SIZE]
[SIZE=13px][FONT=arial][COLOR=#262626][SIZE=13px][FONT=arial][COLOR=#262626]svn.code.sf.net/p/freeghost/code/trunk/packages/web/service/ipxe/bzImage[/COLOR][/FONT][/SIZE]32[/COLOR][/FONT][/SIZE] -
was able to download and copy over, issue was with my DNS server, they were causing issues. The size difference makes me wonder in case the download needs to be decompressed it is coming up with invalid boot kernel. If I need to expand the file what is best?
-
The download does not need to be decompressed. The files are about 6 MB in size each.v
-
OK, after all my issues, self inflicted, I was able to get the kernel installed and it is working perfect. Seems I noticed when I stopped trying to make it overly difficult it was easy. Thank you for all your help.
-
[quote=“Stars75238, post: 25697, member: 23572”]OK, after all my issues, self inflicted, I was able to get the kernel installed and it is working perfect. Seems I noticed when I stopped trying to make it overly difficult it was easy. Thank you for all your help.[/quote]
Welcome to FOG
