Chrome Flex OS

[danibashkov]

I am trying to register Chrome OS Flex inside FOG and it gets registered. After I push the deploy to a target device i receive a message
Is it possible at all to use this platform for a deployment to more devices? I have tried also to load the image from USB drive to a virtual box machine and there i get error - Loading vmlinuz.A… OK and it stuck on that message.

[george1421]

@danibashkov Try single disk non-resizable. Lets see if you can get it past that error. I did find a reference from 2016 on the forum with the same error.

ref: https://forums.fogproject.org/topic/8602/cannot-upload-neverware-cloudready-chromeos-to-fog-e2fsck-failed-to-check-dev-sda20-shrinkpartition

[danibashkov]

Thank you. It worked with these settings inside the image creation.

[xburnerx00]

@danibashkov I too was having issues capturing an image and then I used these settings and it captured an image successfully From a Dell Latitude 3410.

The problem I have now is that the device that that I deployed the image to (also a Dell Latitude 3410) does not boot into Chrome OS Flex. It is stuck in a loop of it trying to boot from HD or network.