after deploying image - no network driver
-
@george1421 so reading from this
i miss this out as i dont to unnatended installs
fog.updateunattend
i think i dont anyway?
when you say
Unattend.xml
For WIN10 you must update the unattend.xml file to include this section. This is an example for the amd64 arch.
where is the unattended.xml ?
-
@robertkwild If you don’t use the unattend.xml file to answer all of the questions the WinSetup/OOBE uses during install you can ignore that section. That is why I wrote it kind of modular. Use what you need ignore the rest.
-
@george1421 atm i dont do an unattended xml file as i havnt got a volume license for windows 10, atm when i run sysprep, i do
sysprep /oobe /generalize /shutdown
so do i miss the sections
fog.updateunattend and
Unattend.xmli imagine i do?
where do i put the .inf driver for my network card then, do i put it here
/images
├─/drivers
├─z2
├─win10
└─x64obviously i will get the right folder names
-
@robertkwild Yes you skip the unattend section. You can just comment the line out or remove it completely.
where do i put the .inf driver for my network card then,
under the x64 directory. On the dell CAB files, under the x64 is a folder with the name of each driver and the driver inf and other files are under that folder. -
@george1421
images
├─/drivers
├─z2
├─win10
└─x64So under the x64 folder do I put the inf files straight in there
do I do this as well after I drop the inf files
pnputil.exe /add-driver “C:\Drivers*.inf” /subdirs /install
-
@robertkwild OK what I want you to do is this.
-
Download the following dell driver cab file: https://www.dell.com/support/kbdoc/en-us/000122156/latitude-7204-windows-10-driver-pack (I picked this one because its about 320MB, not really huge).
-
Use 7-zip to open the cab file to inspect its structure. That is the structure you need to recreate. In reality the script will copy everything below the x64 directory to the target computer. So as long as your drivers are below the x64 directory it will be copied to the target computer. But I recommend that you keep the dell cab file directory structure.
FWIW: The dell driver cab site is here (I realize you are using different vendor hardware): https://www.dell.com/support/kbdoc/en-us/000124139/dell-command-deploy-driver-packs-for-enterprise-client-os-deployment
-
-
@george1421 thanks you george, i will try this tomrrow as i have a pc that needs doing so this is a good test
so the windows driver packs are different from the winPE drivers?
-
@robertkwild said in after deploying image - no network driver:
windows driver packs are different from the winPE drivers
Yes they are.
WinPE drivers are used during OOBE before the first reboot. This is when the winpe environment is running. After the first reboot the full windows OS is running each having their own driver space.
For me when I build the golden image, I will preload the winpe drivers into the system. Then sysprep and capture the image. So when the image is first deploy to a target computer it has the drivers needed for disk and network to get started, the rest will come with the full driver pack later.
-
@george1421 so basically instead of syspreping a standard windows OS, you sysprep a winPE ?
heres the structure i got from extracting that CAB file
7204-WIN10-A05-CJ9XY\7204\Win10\x64
do i need to create a folder called
7204-WIN10-A05-CJ9XY or will 7204 do?
and you say i get the model info from the web GUI when it does an inventory of the system
-
@robertkwild said in after deploying image - no network driver:
basically instead of syspreping a standard windows OS, you sysprep a winPE ?
I’m sysprepping a full system that has the windows pe drivers preloaded. This step may not be necessary now days since windows 10 does a good job of having the common hardware drivers on board.
7204-WIN10-A05-CJ9XY\7204\Win10\x64
This is the dell part you can discard: 7204-WIN10-A05-CJ9XY
This part is the bit you need: 7204\Win10\x64Now below the x64 directory in the dell cab you will see a bunch of directories with maybe dell part codes or what ever, those are the drivers.
That 7204\Win10\x64 directory will be copied in full to the target computer in c:\drivers directory. I should point out the parent driver directory
7204is actually the model number of the computer that is built into SMBIOS. You may have to take a target computer and put it into debug mode to pull the smbios name. On dells the parent driver directory (i.e.7204) is the model number queried by smbios (most of the time). -
@george1421 This step may not be necessary now days since windows 10 does a good job of having the common hardware drivers on board.
That’s what I thought but obviously when deploying a syspreped windows image back on this hardware it doesn’t have the Intel NIC driver
That 7204\Win10\x64 directory will be copied in full to the target computer in c:\drivers directory
So if it finds the compatible NIC driver in c:\drivers, will it install the driver or will I have to manually install the driver
-
@robertkwild said in after deploying image - no network driver:
So if it finds the compatible NIC driver in c:\drivers, will it install the driver or will I have to manually install the driver
Just to be clear, FOS (engine that images the computer) is linux based. It can not step into Windows to do things. What it can do is leave behind bits that windows can use during oobe/winsetup. So what the post install script will do is copy the hardware specific drivers from the FOG server to the target computer into the C:\Drivers folder.
Now when windows is running then you run the command to load all of the drivers in a specific directory into windows.
In that post install script tutorial you will see this command that you need to insert into the setupcomplete.cmd batch file.
pnputil.exe /add-driver "C:\Drivers\*.inf" /subdirs /installThe pnputil.exe program will search c:\drivers (or whatever path you define) and any subfolders for windows drivers and inject them into windows.
-
@george1421 So make a batch file when I’m in the windows desktop after the oobe generalise stage, call it
setupcomplete.cmd
And put
pnputil.exe /add-driver “C:\Drivers*.inf” /subdirs /install
Or I could just run that command instead
-
@robertkwild Yes and yes The setupcomplete.cmd is a windows thing, where winsetup will automatically call that batch file at the end of oobe and just before the login prompt is displayed. It is used for the lite touch method of image deployment. Google that file name to find out the details and its location.
Or just create the batch file and leave it on the administrators desktop and you can manually run it. It doesn’t need to be called setupcomplete.cmd that is only for the unattended install. In my case Once I start FOG’s image deployment I don’t touch the computer until its finished and ready to move to the users work location. It is totally touchless once fog imaging has started.
-
@george1421 is there any way to auto call that batch file after the oobe generalise has finished
bear in mind im not using an unattended.xml answer file
Ok I save it here
%WINDIR%\Setup\Scripts\SetupComplete.cmd
In that setup complete CMD it’s
pnputil.exe /add-driver “C:\Drivers*.inf” /subdirs /install
But how do I get fog to dump the script in there in the first place
-
@robertkwild AFAIK the unattend.xml file and the setupcomplete.cmd files are not connected they can be used independently of each other. I believe the setupcomplete.cmd is a function of sysprep and not unattend.xml. But I can say I use both so I’ve never tried using one without the other.
-
@george1421 ok i feel this won’t work for me as when I captured the image I ran a sysprep without an unattended answer file, so I fear I’m going to have to run the sysprep again this time specifying an answer file
As how do I get Windows or fog to run the script after my oobe generalise
i mean this script
SetupComplete.cmd
pnputil.exe /add-driver “C:\Drivers*.inf” /subdirs /install
-
great thanks @george1421 i understand now, basically to do this right, you need to sysprep using an unattended xml file which i dont do, so best case scenario is i can just leave the drivers there and install once im on the desktop,
thanks again george
