Problem to deploy a only partition image using multicast

[Fernando Gietz]

Thanks @Sebastian-Roth , I will wait the fix

[Sebastian Roth]

@Fernando-Gietz Ok, this is fixed in the working branch. Please give updating to the working branch a try if you are keen.

[Fernando Gietz]

Hi @Sebastian-Roth ,

I tried to install the working branch to test it but appears some error:

# more /root/fog_1.4.0/bin/error_logs/fog_error_1.5.4.8.log 
/bin/lsb_release
/bin/systemctl
ln: fallo al crear el enlace simbólico «/usr/lib/systemd/system/mysql.service»: El fichero ya existe
ln: fallo al crear el enlace simbólico «/usr/lib/systemd/system/mysqld.service»: El fichero ya existe
ln: fallo al crear el enlace simbólico «/etc/systemd/system/mysql.service»: El fichero ya existe
ln: fallo al crear el enlace simbólico «/etc/systemd/system/mysqld.service»: El fichero ya existe
/opt/fog/.fogsettings

And the installation process stops here:

 * Here are the settings FOG will use:
 * Base Linux: Redhat
 * Detected Linux Distribution: Red Hat Enterprise Linux Server
 * Server IP Address: 10.0.yyy.xxx
 * Server Subnet Mask: 255.255.255.0
 * Interface: ens192
 * Installation Type: Normal Server
 * Internationalization: 
 * Image Storage Location: /images
 * Using FOG DHCP: No
 * DHCP will NOT be setup but you must setup your
 | current DHCP server to use FOG for PXE services.

 * On a Linux DHCP server you must set: next-server and filename

 * On a Windows DHCP server you must set options 066 and 067

 * Option 066/next-server is the IP of the FOG Server: (e.g. 10.0.yyy.xxx)
 * Option 067/filename is the bootfile: (e.g. undionly.kpxe)


 * Are you sure you wish to continue (Y/N) 
 * Installation Started

 * Installing required packages, if this fails
 | make sure you have an active internet connection.

 * Adding needed repository....................................

[Sebastian Roth]

@Fernando-Gietz What do you mean by “stops here”? It usually takes a couple of seconds at this stage, sometimes a bit longer if your internet connection is slow. But it should finish with “OK” or “Failed”.

[Fernando Gietz]

I waited several minutes and nothing, but I will try again …

[Fernando Gietz]

I rerun the installer with the same results

[Quazz]

@Fernando-Gietz Those ‘errors’ are fine, they’re just pointing out the symbolic link already exists (which is fine)

It stopping on adding repositories is more concerning, perhaps yum is stuck?

[Sebastian Roth]

@Fernando-Gietz Try running: yum update

Ummmm? Just noticed this: /root/fog_1.4.0/bin/error_logs

Sure you’re not mixing thing up here??

[Fernando Gietz]

Hi,

I have rebooted the machine And now works fine

[Sebastian Roth]

@Fernando-Gietz You mean the installer or pushing a single partition to clients via multicast?

[Fernando Gietz]

The installer, I am trying now to deploy one partition and seems that works fine

[Fernando Gietz]

I can confirm that works fine