Storage Node - Node Offline after upgrade to 1.5.3

[austinjt01]

Re: Storage Nodes not showing in GUI Were having the same issue again, I just updated to 1.5.3 and now the Storage node is saying that it isn’t available.

Not sure what I have to do to fix this. Let me know if you remember. Thanks, Jake.

[Wayne Workman]

@austinjt01 Did you upgrade the node also? The main server and all nodes must be on the exact same fog version to work.

[Tom Elliott]

This is expected somewhat. If it cannot reach the storage node, it isn’t going to try to reach it, rather show you the message. This doesn’t necessarily mean the node doesn’t work, it just means from the context of the dashboard, it cannot reach it.

[austinjt01]

@tom-elliott Maybe this is an unrelated issue, but in the past few months I have found it easier to create my image on a per machine basis. I get more repeatable results with driver installation that way.

So before my upgrade to 1.5.3 I took a snapshot of my VM running in VMWare ESXi k(for safety sake).

Now when i built out a new audit mode image that I want to try and do an upload capture, it appears to be working, but I get a series of error messages on the machine and then that particular host will sit as an active task at lets say 10% until I cancel it out.

I tried reverting back to my pre 1.5.3 upgrade snapshot, but that did nothing. Still getting the same error.

Any help would be appreciated, thanks!

[austinjt01]

@tom-elliott So here’s some pictures that I took of when the errors occur during the image process.

[Tom Elliott]

@austinjt01 The messages would seem to indicate a problem with the disk. Not sure if I can do anything to help with that.

[Wayne Workman]

@austinjt01 Please create new threads for each issue.