Fog is stopping deploying at 56%
-
@msi Which version of FOG? Tried on different clients? Is this multicast or unicast deploy? What kind of disk? What model/machine?
From the short information we have so far I’d think it’s bad sectors on the client’s disk but well, what do I know.
-
@sebastian-roth I am using latest 1.4.4, Latest Development Version: 1.5.0-RC-9
Latest SVN Version: 6078. Yes, I tried two different machine. Both of them are single deployment using regular HDD. The client are on Node side. Other client from different node and location are working fine. -
@msi said in Fog is stopping deploying at 56%:
Other client from different node and location are working fine.
Based on that statement, I think you have a multi-node setup and you’re using the location plugin… If so, is this problem node a master or a non-master?
-
@msi Multicast or unicast? Please try a third machine just to make sure this is always the same. Does it always happen exactly on 56% or sometimes a little more/less?
-
@wayne-workman it’s a non-master.
-
@msi said in Fog is stopping deploying at 56%:
it’s a non-master.
In such case, you could try deleting that image’s files on that node - which will cause replication to copy it back. Then see if it’s fixed.
-
@wayne-workman hi , this working now
-
@msi What fixed it? Please provide details for the next person that comes to this thread for answers.
-
@wayne-workman while deploying a machine gets stuck in the middle of installation. after removing the image from the node, the primary fog server sends the image again.
-
@msi In other words, that node’s copy of the image was corrupt somehow so you deleted it, and replication re-replicated a good copy from the master node to the slave node.
-
@wayne-workman Correct… Thanks for your help
