Surface Pro 4 registration issues
jwalt last edited by jwalt
@tom-elliott I am out of the office now I will try and get on the working tomorrow. What would be the best way to do that?
The working is the important part. Right now, from what I can tell, you’re on
This post is deleted!
Those were the exact steps I did about 2 hours ago to get to the version I am currently on.
Did you install using
Meaning, can you please do:
As root of course:
git checkout working
That is currently how i have it setup. I attempted with out the mini switch and had the same results.
Looking at the light on the dongle it stops flashing as soon as this line…
ACPI Error: Method parse/execution failed _SB.PCI0.UA02, AE_NOT_FOUND (20170531/psparse-550)
@jwalt Try connecting an unmanaged mini switch to connect between client and network. Does that change anything?
I am still getting the same issues.
my current config is…
Running Version 1.5.0-RC-9
SVN Revision: 6080
KERNEL ARGS removed
Also, to my knowledge, you should not need the
@jwalt Are you working from the
workingbranch of git, or the
I ask because the 7156 was removed in working. Which might help you if you install it instead.
Thank you for the quick response!
I put the ipxe back and tested again with the results below.
@jwalt Though this shouldn’t have an impact on your issue we don’t provide those ipxe7156 binaries anymore because the problem is now fixed in the official iPXE code and we got rid of the old binaries. So please configure your DHCP to point to the very latest
So do you actually see the boot message telling you to un- and re-plug the USB NIC? This should come up when using the
has_usb_nic=1kernel parameter. Make sure it’s phrased correctly or it wouldn’t work.