Multicasting - Not The Master Node
-
@Joe-Gill try to restart the service and then watch the log.
service FOGMulticastManager restart;tail -f /opt/fog/log/multicast.log -
I don’t know if this is strictly necessary or even related, but you may have to assign the default storage group for the image definitions.
Click on the image definition, on the left hand side select Storage group, then check the checkbox for your storage group.
-
@Tom-Elliott
Well I finally tried pushing MultiCast images again…I did run the update again before I tried the steps listed below…
@Quazz
I thought you might have been onto something with this… I went into one of my base images to check the primary group and as you noticed the primary group was unchecked. So I selected that and updated it. Than I restarted the service. It still gives me the same error…@Wayne-Workman
I also tried running:service FOGMulticastManager restart;tail -f /opt/fog/log/multicast.logI got the same result… The server still says “This is not the master node” in the FOGMulticast.log file…
I tried stopping and starting things and I got the same message.
root@fogserver:/var/log/fog# tail /var/log/fog/multicast.log [06-08-17 8:27:32 am] Interface Ready with IP Address: 127.0.0.1 [06-08-17 8:27:32 am] Interface Ready with IP Address: 127.0.1.1 [06-08-17 8:27:32 am] Interface Ready with IP Address: 172.16.1.17 [06-08-17 8:27:32 am] Interface Ready with IP Address: 206.127.121.78 [06-08-17 8:27:32 am] Interface Ready with IP Address: fogserver [06-08-17 8:27:32 am] * Starting MulticastManager Service [06-08-17 8:27:32 am] * Checking for new items every 10 seconds [06-08-17 8:27:32 am] * Starting service loop [06-08-17 8:27:32 am] | This is not the master node root@fogserver:/var/log/fog# tail /var/log/fog/multicast.log [06-08-17 8:38:43 am] | This is not the master node [06-08-17 8:38:53 am] | This is not the master node [06-08-17 8:39:03 am] | This is not the master node [06-08-17 8:39:13 am] | This is not the master node [06-08-17 8:39:23 am] | This is not the master node [06-08-17 8:39:33 am] | This is not the master node [06-08-17 8:39:43 am] | This is not the master node [06-08-17 8:39:53 am] | This is not the master node [06-08-17 8:40:03 am] | This is not the master node [06-08-17 8:40:13 am] | This is not the master node root@fogserver:/var/log/fog#Any advice is helpful! I’ll be working on this issue today. If any of the Dev’s want to remote in to take a peak, let me know.
Thanks!!!
-
@Joe-Gill Do you have the Location plugin installed per chance?
-
@Joe-Gill Is fogserver the actual dns name of the server? What’s the IP set to in the Storage Node’s definition?
-
Mind you the pictures you provided show the FOG Server’s IP address as 172.16.1.22 but the multicast log file you’re providing shows the IP address as 172.16.1.17
-
@Quazz
I’m assuming not because I’m unaware what that is. LOL!@Tom-Elliott
I just double checked our DNS server and it’s set to “fogserver” -
@Tom-Elliott
172.16.1.22 is the storage node IP. -
@Joe-Gill So what is:
[06-08-17 8:27:32 am] Interface Ready with IP Address: 127.0.0.1 [06-08-17 8:27:32 am] Interface Ready with IP Address: 127.0.1.1 [06-08-17 8:27:32 am] Interface Ready with IP Address: 172.16.1.17 [06-08-17 8:27:32 am] Interface Ready with IP Address: 206.127.121.78 [06-08-17 8:27:32 am] Interface Ready with IP Address: fogserver -
@Joe-Gill What’s the storage node like? One installed by FOG installer or a NAS?
-
@Quazz
So the storage node is a FOG storage node separate from our Fog Server.@Tom-Elliott
That is on the Fog Server. -
@Joe-Gill I’m confused.
The server you’re trying to have multicast is not the server you’re looking at the logs on. So of course the “fogserver” server is NOT the master node right?
-
@Tom-Elliott
I’d say that’s probably our problem.The IP Address below is the IP for the server or the storage node? I’m assuming this is wrong and needs to be changed to our server IP?
-
@Joe-Gill For multicast, yes. If .22 server is a NAS, the nas would only work for unicast images.
-
@Tom-Elliott
I’ll adjust that and it sounds like it should fix this.I’ll let ya know! Thank you!
-
@Tom-Elliott
For the record, I restarted the service on the server and the problem is now fixed. Thanks!Problem solved!
Thanks!
-
So, now it cannot locate the images. What is the default location on the server for images?
When it’s set to .22 it finds my images. As the location is correct on the settings page.
Thanks!
-
@Joe-Gill What is 22? What is 17?
-
.17 = fogserver (Where our main fog installation is.)
.22 = fog storage node. (Where FOG Storage Node installation is.) -
@Joe-Gill Does “Where our main fog installation is” have the images as well?
