Server migration - Name changing issues

[george1421]

@Tom-Elliott So in this case its best to just remove the old fog client and then push down install a new one with the proper MSI flags to point to the new 1.3.0 fog server (??)

[Tom Elliott]

@george1421 Correct. Or you can use “client updater” to update the config.ini, but it won’t do any good if the clients can’t find the new server to begin with.

[Yanis-Sauve]

@Tom-Elliott So, if I update the config.ini file with the new server’s IP, it will work, it just won’t update to the new client, right? I will still have to update it on all the machine at some point, right? The client should not have any trouble finding the new server, only the last octet of the IP address changes.

@george1421 Thanks a lot for the speedy response and help. Much appreciated

[Tom Elliott]

@Yanis-Sauve I can’t say it “will” or “won’t” work.

If you still have the old server, you would need IT to have the new IP address setting. Even with that, you still have to reboot the machines for the new changes to take effect.

It may just make more sense, if your last octet is the only thing changed, to change the new server to the original IP address.

[Yanis-Sauve]

@Tom-Elliott Well, considering I’m the IT guy, that should not be a problem.

Putting the new server on the old IP is one of the solutions I’m considering. The main problem I had with the new server since I migrated the configuration from the old server to it is that the old IP was still in some places. I’ll have to change all of these back again. I’ll try to find the page that helped me with that.

Thanks for the help. I’ll let you guys know how it goes.

[george1421]

@Yanis-Sauve If you were handy with scripting you could just push out a new ini to each workstation to update the ini or create a snapin on 1.2.0 server to update the ini to the new server. There is a bunch of ways to update that ini file.

[Tom Elliott]

Or, and maybe just cause I like the new stuff better, pushing out a GPO remove the old client, and install the new (one time only of course – per machine).

[george1421]

@Yanis-Sauve said in Server migration - Name changing issues:

I migrated the configuration from the old server to it is that the old IP was still in some places. I’ll have to change all of these back again. I’ll try to find the page that helped me with that.

Wayne created a script to fix up the FOG install if the IP address has been changed for FOG 1.3.0. Let me see if I can find the link.

[george1421]

@Tom-Elliott said in Server migration - Name changing issues:

Or, and maybe just cause I like the new stuff better, pushing out a GPO remove the old client, and install the new (one time only of course – per machine).

As long as we are just throwing stuff out, this could also be done (for free) with PDQ Deploy. That is what we use for package deployment instead of snapins.

[george1421]

Here is the post that describes it https://forums.fogproject.org/topic/9103/new-script-to-update-fog-server-s-ip-address

Good job @Wayne-Workman

[Yanis-Sauve]

@george1421 I’d prefer to update the client of course. I’ll see what can be done about that.

The script looks interesting. I’ll keep that one in my back pocket.

However, for now, the plugin solution to update the clients is really interesting. I have not worked with them before. Are there any resources that could help me figure out how to use them?

[Wayne Workman]

A year ago maybe I tried using a snapin to remove the old client and install the new one. I didn’t have any luck, I ended up using the hammer for it (group policy computer based startup script).