Do we have any solution without WOL scheduled..?
-
@Wayne-Workman …Please understand my question.
I am planning to deploy/capture the image for one desktop without WOL enable.
What I am doing…
I just schedule the task in FOG…and then I will switch on my system and leave it…
During PXE boot the system have to wait for sheduled task …it not suppose to boot with iPXE boot menu
-
@Satheesh I think we all misunderstand your question. I read through this a couple of times not but still don’t understand what you really mean. What’s your native language. Maybe you could write in your language and we try to use google translate to figure out what exactly you mean. Please give it a try.
-
@Sebastian-Roth …I have written my queries in normal Indian English only.
This is my planning
I need to Deploy the image to desktop without enabling WOL.What I have done…
I just went to Host Management -->select “Host”—> select “basic taks” ----Click “Deploy”, Uncheck “Wake On LAN” — Click schedule delayed deployment.Now “Host task” on FOG created…
Now I will switch on my client host and leave it…
Clinet host taken the IP from DHCP booted via TFTP…
Now the system not waiting for Scheduled Delayed Deployment. It’s continuous to boot with main menu.
Here is the problem.…If I create Scheduled Delayed Deployment task it not suppose to show this Booting menu. instead of that it have to say "your task will start in next few min / few Hours (date and Time)
-
@Satheesh You don’t have to uncheck WOL if it’s not enabled on the machine. Try instant deployment instead, should work.
-
@Quazz Instant deployment is working perfect…
Do we have solution for Scheduled Delayed Deployment by Uncheck of “Wake On LAN”…?
-
@Satheesh There are numerous things that could cause delayed deployment to not work, one of them being your server timezone being incorrect somewhere. There’s a FOG setting for timezone you could check and of course on your system itself.
-
@Quazz FOG server system time and WEB portal time & client system all are same with IST +5.30
-
@Satheesh What version are you on? I ran a quick test and delayed deployment works fine for me.
As soon as the designated time hits, I boot it up and it starts to do its assigned task.
-
@Quazz …I am using FOG 1.3.0 RC8…latest update
Schedule delayed deployment and try boot up your system before designated time hits…
-
@Satheesh Well, it doesn’t really work like that. It will only attempt to start its task at the designated time. It won’t block you from accessing the menu until that point in time, so people can use their computers normally in the mean time.
-
Thank God now you have understand my point… for this only I need a solution form your TEAM…
Adding or integrating the below requirement on FOG
Scheduled Delayed Deployment task is created and it will start in next few min / few Hours (date and Time) (press Esc to Normal boot)
Now people can pressing Esc and use their computers normally in the mean time.
-
@Satheesh I don’t agree with what you want changed.
Currently, - if a computer is off, a scheduled task will wake it up and perform the task.
If it is on - and you’re using the FOG Client - the fog client will ask the user to allow maintenance, or to delay 10 minutes (currently). The client at the end of the delay will reboot the computer, and the computer performs the task.
I don’t see how this isn’t good enough. You are asking for the computer to purposely hang during the boot process for - how long? That’s not acceptable. And why can’t WOL be turned on? You’re asking the developers to do a very major change because you don’t want to turn on WOL. We’re in Release Candidate mode - and this is way far out there - and not only is it way far out there, I just wouldn’t ever use a scheduled image task anymore because I don’t want my organization’s computers just hanging on boot. It’s unacceptable.
My advice to you, turn on WOL like the rest of us did.