Menu Item: Gparted
Description : Gparted Live
kernel http://${fog-ip}/iso/gparted/live/vmlinuz vmlinuz boot=live config components union=overlay username=user noswap noeject ip= vga=788 fetch=${fog-ip}/iso/gparted/live/filesystem.squashfs
initrd http://${fog-ip}/iso/gparted/live/initrd.img
boot
I am not understand…
in same VLAN already configured windows system getting IP from DHCP
IP 10.51.0.16
Gw 10.51.0.10
DNS 10.51.0.200 10.51.0.201
From this system I able to open the FOG server on http protocol
http://10.1.7.xx/fog – that means port 80 is open and client able to access the server from this VLAN.
why **udhcpc :- deleting routers ** here during PXE boot operation
Regards
L.Satheesh
Hi,
UBUNTU OS 16.04
I have Multiple VLAN setup with one centralized FOG server (IP 10.1.7.xx) & storage server at remote locations, TFTP pxe boot on central location & use inits and kernel from remote side (10.51.0.x)
This setup was working very perfectly on 1.4.0 with revision 6069.
Now I have upgraded my FOG server from 1.4.0 to 1.5.4, TFTP pxe boot from central location & inits and kernel from remote side and it is booted, when come to DHCP lease
Below is the error
udhcpc: sending discover
udhcpc: sending select for 10.51.0.x
udhcpc: lease of 10.51.0.16 obtained, lease time xxxxx
deleting routers
adding dns 10.51.0.xxx
DHCP failed… after press enter…
*Attempting to check in…
*(in Line for 4.23)
*Attempting to check in…
*(in Line for 4.24)
*Attempting to check in…
*(in Line for 4.25)
*Attempting to check in…
*(in Line for 4.26)
& Going on continuously
This problem occurs only if i upgraded my FOG server from 1.4.0 to 1.5.4.
Regards
L.Satheesh
@xcvtop — Windows or Linux ( I assume 500Gb HDD in same CPU)
Option 1 :-
Windows/Linux – create folder in 500GB (e.g. FOG DATA) and make a symbolic link under /Images/fogimagedata
in image management you have to set /Images/fogimagedata/imagefoldername
@Avaryan : Yes I have tried by removing domain in FOG_AD_DEFAULT_USER it’s worked. Tom Elliott will find the solution for this.
@Wayne-Workman : I will try as per your suggestion and update it
@Avaryan :Right if it’s possible to exclude from uploading Or exclude during Deploying.
/U is the individual user DATA partition…it is available in all system… if we need to reloading the image on end user computer, I need to deploy except /U partition.
Current partition (capture Done successfully)
Filesystem Size Used Avail Use% Mounted on
udev 990M 4.0K 990M 1% /dev
tmpfs 201M 744K 200M 1% /run
/dev/sda1 291G 9.1G 267G 4% /
/dev/sda2 4.0K 0 4.0K 0% /var
/dev/sda3 5.0M 0 5.0M 0% /U
/dev/sda4 1001M 0 1001M 0% /opt
/dev/sda5 100M 0 100M 0% /boot
Need to Deploy the image except /U partition…How?
Not able to join domain…when i look into “FOG System Settings” – Active Directory Defaults
**On FOG_AD_DEFAULT_USER if we enter “domain\username” (double slash)
is coming (e.g.domain\\username ) if give again save changes "domain\\\\username " (four slash)is coming, IF again give save changes “domain\\\\\\\\username” (eight slash) is coming
Please check
Now stated working properly…Not sure where was the problem
I did once again trunk update…reconfigured