Bugs in FOG 0.33

regad

I don’t manage to upload an image from a host. When I’m in the upload menu I have only the choice to press the blue button :
“Deploy to host”.
In the .32 release there is in “basic tasks / upload” a grey button named : “upload image”

astrouga

I did a clean install of Ubuntu 12.04 with Fog 33b (trunk 856) today. I only had time for limited testing. These are the items I came across. Sorry if some are the same as reported earlier…I just didn’t have time to compare:

Same issue with writing to the images directory. On an image creation task (upload), I get an error it can’t create a folder in /images/macaddressofclient. Looks like the /dev is being left out of the path.
I made /images folder rw so I could continue testing.
When I click on “Hosts Tasks --> Upload”, the page is a little confusing. The top says “Deploy Task: Upload” and the button to start it says “Deploy to hostname” where hostname is your client name. When I click on that, The next page says “Deploy image to host”…that doesn’t sound like an upload to me, so that is confusing.
Image upload works with change in #1. The task finishes on the client. No error, just a single line repeats over and over:
" *

…
"

I had to manually reboot the client. The task was still in the Task Management view and was listed in the mysql tasks table.

The delete task button (red box with x) removes the task from the view, but it does not remove the task from the mysql tasks table. If you refresh the Task Management page in the browser, the task comes back. I had to go back into the mysql db and delete the task. (One note is that I was able to remove tasks from the Task Management page if they had not started on the client.)

Also, the image file lives in a folder that is based on the mac address of the client, and not the task name that I assigned when I created the task. So to deploy that image, I had to change the name of the directory or the “image path” in the image defintion.

Deploying an image finished and the computer rebooted. The task was not deleted though. Had to do it manually through mysql. Also, my image did not actually work, but I think that is my fault. The imaging process is still really slow for me. I can provide more info on this later if needed.
All of the links on the “Other Information” page produce a FOG DEBUG error involving missing Methods in classes.
A few tiny version-related things to note: When I run the installfog.sh installer script, it still says version 0.32. Also, in the init.gz file used to boot the client, the /usr/share/fog/lib/funcs.sh file has the 0.32 version in the “displayBanner()” function, so you see that version when the client boots up and is about to start the task.

Cheers, astrouga

Blackout

857

schemaupdater: Added table: taskLog
Added Classes: TaskLog, TaskLogManager
Host: createImagePackage(): If task is upload, add ‘dev/’ to end of ‘storage’ kernel arg - fixes bug reported
Task: Added: removePXEFile() - Removes PXE File
Task: Added: cancel() - Sets Task to ‘Cancelled’ status and removes PXE File
Active Tasks: “red x” now Cancels Task instead of Destroying
Host + Group Management: Added ‘Deploy’ icon to row results
Host + Group Management: Renamed various links
Deploy: Update titles and buttons to reflect Task Type and Target

#1 - Fixed
#2 - Fixed
#3 - Probably not fixed - please test again
#4 - Related to #3
#5 - These pages arent complete yet
#6 - Will be updated on final packaging, thank you for reminding

falko

wow development is fast, even if it has been quite up until now. Hats of to Blackout and the other developers + those testing.

now ubuntu 12.04 Server is out i will give the 0.33 trunk a test

Blackout

859

Storage Management Web UI Pages completed
schemaupdater: Added unique fields for tables: nfsgroups & nfsgroupmembers
Updated remove icon

Blackout

860

Host: createImagePackage(): Now checks if a Storage Node was found before checking if it’s valid
Host: Updated layout, MAC now sits under Hostname
Tweaked icons on search results for Host, Group, Image and Snapins
Image: Now enforces OS requirement
Made ‘delete’ pages consistent between all Management Pages

Blackout

861

Installer: TFTP: Removed ‘\n’ in pxelinux file
Installer: TFTP: Ubuntu: Installer now correctly detects /etc/default/tftpd-hpa file and installs if file found

862

Task Status ID Updates in service script functions - image upload and download now work as intended - please verify
StorageGroup Class simplified

Fernando Gietz

I try the fog 0.33b installer under Centos 5. I found a “bug”: the packages are not right under this distro.

[CODE]lib/redhat/config.sh

packages=“httpd php php-gd php-cli php-gettext mysql mysql-server php-mysql dhcp tftp-server nfs-utils vsftpd net-tools wget xinetd tar gzip make m4 gcc gcc-c++ htmldoc perl perl-Crypt-PasswdMD5 lftp clamav-update”;
[/CODE]

The php-gettext not exists in Centos nor RedHat. And the php packages install an old version of PHP, and this 0.33b version don’t works, you must install php53 packages.

Blackout

Are there PHP 5.3 packages yet?

Last time i looked you had to manually compile php 5.3 for CentOS. Booooo

Fernando Gietz

No problems found with Centos 5.
[QUOTE][root@r800145 administrador]# yum search php53
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile

base: ftp.cica.es
extras: ftp.cica.es
rpmforge: mir01.syntis.net
updates: ftp.cica.es
============================================================== Matched: php53 ===============================================================
php53.i386 : PHP scripting language for creating dynamic web sites
php53-bcmath.i386 : Un módulo para aplicaciones PHP para utilizar la biblioteca bcmath
php53-cli.i386 : Interfase de línea de comando para PHP
php53-common.i386 : Archivos comunes para PHP
php53-dba.i386 : Un módulo de capas de abstracción de bases de datos para aplicaciones PHP
php53-devel.i386 : Files needed for building PHP extensions
php53-gd.i386 : Módulo para aplicaciones PHP para usar la biblioteca de gráficos gd.
php53-imap.i386 : A module for PHP applications that use IMAP
php53-intl.i386 : Internationalization extension for PHP applications
php53-ldap.i386 : A module for PHP applications that use LDAP
php53-mbstring.i386 : Módulo para aplicaciones PHP que necesitan manejar cadenas multi-byte
php53-mysql.i386 : A module for PHP applications that use MySQL databases
php53-odbc.i386 : A module for PHP applications that use ODBC databases
php53-pdo.i386 : Un módulo de abstracción de acceso a bases de datos para aplicaciones PHP
php53-pgsql.i386 : A PostgreSQL database module for PHP
php53-process.i386 : Modules for PHP script using system process interfaces
php53-pspell.i386 : A module for PHP applications for using pspell interfaces
php53-snmp.i386 : A module for PHP applications that query SNMP-managed devices
php53-soap.i386 : Un módulo para utilizar el protocolo SOAP en aplicaciones PHP
php53-xml.i386 : Un módulo para aplicaciones PHP el cuál utiliza XML
php53-xmlrpc.i386 : Módulo para aplicaciones PHP que usan el protocolo XML-RPC
[/QUOTE]

The installed packages
php53.i386 5.3.3-5.el5 installed
php53-cli.i386 5.3.3-5.el5 installed
php53-common.i386 5.3.3-5.el5 installed
php53-gd.i386 5.3.3-5.el5 installed
php53-mysql.i386 5.3.3-5.el5 installed
php53-pdo.i386 5.3.3-5.el5 installed

Fernando Gietz

I’ve problems under Centos and the FOg daemons: FOGReplicator,FOGScheduler and FOGMulticastManager.

[CODE]
[root@r800145 administrador]# /etc/init.d/FOGImageReplicator start
Iniciando FOGImageReplicator: [ OK ]
[root@r800145 administrador]# PHP Warning: date(): It is not safe to rely on the system’s timezone settings. You are required to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected ‘Europe/Berlin’ for ‘CEST/2.0/DST’ instead in /opt/fog/service/common/functions.php on line 46
[/CODE]

The problem is the php function date(), if you don’t setup your timezone in php.ini, it crash.
I setup my php.ini with my timezone values and don’t problems.
But FOGShceduler daemon:

[CODE]
[root@r800145 administrador]# /etc/init.d/FOGScheduler start
Iniciando FOGTaskScheduler: [ OK ]
[root@r800145 administrador]# PHP Warning: require_once(/var/www/html/fog/management/lib/Imageable.interface.php): failed to open stream: No such file or directory in /opt/fog/service/FOGTaskScheduler/FOGTaskScheduler on line 58
PHP Fatal error: require_once(): Failed opening required ‘/var/www/html/fog/management/lib/Imageable.interface.php’ (include_path=‘.:/usr/share/pear:/usr/share/php’) in /opt/fog/service/FOGTaskScheduler/FOGTaskScheduler on line 58
[/CODE]

The file [B]/var/www/html/fog/management/lib/Imageable.interface.php [/B]don’t exists[B].[/B]

[CODE][root@r800145 lib]# pwd
/var/www/html/fog/management/lib
[root@r800145 lib]# ls -la
total 20
drwxr-xr-x 5 apache apache 4096 may 4 21:47 .
drwxr-xr-x 15 apache apache 4096 may 4 21:47 …
drwxr-xr-x 5 apache apache 4096 may 4 21:47 jpgraph
drwxr-xr-x 3 apache apache 4096 may 4 21:47 ssh
drwxr-xr-x 6 apache apache 4096 may 4 21:47 .svn
[/CODE]

Darren George

Good day guys ive been following the details about 0.33 almost daily and in my excitment downloaded the beta trunk thats has been mentioned in the forum here, when ive launched the installfog.sh the installer is for 0.32 is there something stupid im doing here or will i need to replace files once installed? sorry for the stupid question im just keen to see what 0.33 looks like so far

Blackout

863

MACAddress->getHost(): Now checks Additional MAC Addresses for a Host match
service/Pre_Stage1.php: Lots of love - has been converted to a try{}catch style script
FOGBase: Moved getClass() from FOGCore to here - all FOG classes should now be able to access $this->getClass() instead of $this->FOGCore->getClass()
Host: Added: getActiveTask(): Finds a Task that has the state of ‘Queued’, ‘Checked-In’ or ‘In Progress’ (1, 2, 3) - Want to get the Active Task for a Host via MAC? $this->getClass(‘MACAddress’, $mac)->getHost()->getActiveTask() or $MACAddress->getHost()->getActiveTask()
MACAddress: Now correctly constructs FOGBase
MACAddress: Added: getMAC() - calls getMACWithColon()

I may have broken some stuff as i have not tested yet

These updates provide an easier way to access Active Tasks and data related to service scripts.
The service scripts will eventually be replaced with OOP versions.

Blackout

864 + 865

Installer: Updated version to 0.33BETA
Installer: Redhat: Updated PHP packages to be install - thanks Fernando Gietz

Darren George

BLackout apoligies it was me being an idiot your busy enough with out me being inpatient after i dropped that message i left the installer going for a bit and all came up fine in 0.33b. thanks for response tho cheers

regad

I have downloaded and successfully installed the 862 trunk on a 12.04 lts Ubuntu. But I didn’t manage to install on a Debian6 machine;:tftpd-hpa package couldnt be installed .
Then I tried to upload an Image ( Debian6, ext4 and lvm) on my Ubuntu machine. But upload is always performed in raw mode, even I have created the image in Multiple partition Image : Single disk.
My question is : is it already possible to upload an image ext4 format ?

astrouga

Sorry, I’ve been out a week. Just gave trunk 866 a whirl on Ubuntu 12.04. I did an upgrade over another beta.

When I try to upload an image, the image is being written to “/images/dev” now. When the image process finishes, my client just spit out an “*” on a single line and that repeated until I rebooted the client. It looks like at the time the image upload task finished, the error log in /var/log/apache2 has the following error. It repeated until I rebooted the client:

(Note: I’ve removed my client ip from the output below and replaced it with “ipAddressOfClient”)
[CODE][Fri May 11 09:02:46 2012] [error] [client ipAddressOfClient PHP Fatal error: Call to
undefined function isValidMACAddress() in /var/www/fog/service/Post_Stage2.php on
line 53
[/CODE]
[SIZE=3][SIZE=2][SIZE=3][SIZE=2]
[SIZE=3]I manually moved the image folder out of “/images/dev”, updated my image definition and downloaded it to a client. When the dump finished, the client screen repeated the following until I power-cycled it:[/SIZE]

[SIZE=3] "[/SIZE]
[SIZE=3] rm: can’t remove “co.txt”: no such file or directory.[/SIZE]
[SIZE=3] cat: can’t open “co.txt”: no such file or directory.[/SIZE]
[SIZE=3] *[/SIZE]
[SIZE=3] "[/SIZE]

[SIZE=3] error.log in /var/log/apache2 had the following error repeating over and over:[/SIZE]

[/SIZE][/SIZE][/SIZE][/SIZE]
[CODE][Fri May 11 10:30:55 2012] [error] [client ipAddressOfClient] PHP Fatal error: Call to

undefined function isValidMACAddress() in /var/www/fog/service/Post_Stage3.php on

line 28

[/CODE]
[SIZE=3][SIZE=2][SIZE=3][SIZE=2]
[SIZE=3]The downloaded image did not work.[/SIZE]

[SIZE=3] I’ll try a clean install today and try imaging different hardware.[/SIZE]

[SIZE=3] astrouga[/SIZE]
[/SIZE][/SIZE][/SIZE][/SIZE]

Fernando Gietz

I’ve updated my svn to the ver865, in lib/redhat/config.sh (see attached files):
*php-mysql package -> php53-mysql
*clamav-update -> clamav
*freshclam configuration
[QUOTE]#where is freshclam’s config file
freshdb=“/var/clamav/”;
freshwebroot=“${webdirdest}/av/”;
freshconf=“/etc/freshclam.conf”;
freshcron=“/usr/bin/freshclam”
[/QUOTE]

This information in not mine, I see it in “install FOG on Centos” video tutorial. I don’t have merit .

Other bug:
I can’t access to the fog configuration in the web gui. I can only access to the external links.[ATTACH=full]112[/ATTACH]

[url=“/_imported_xf_attachments/0/112_Captura de pantalla de 2012-05-11 18:59:14.png?:”]Captura de pantalla de 2012-05-11 18:59:14.png[/url][url=“/_imported_xf_attachments/0/113_config.sh.txt?:”]config.sh.txt[/url]

Blackout

[quote=“regad, post: 3421, member: 1053”]I have downloaded and successfully installed the 862 trunk on a 12.04 lts Ubuntu. But I didn’t manage to install on a Debian6 machine;:tftpd-hpa package couldnt be installed .
Then I tried to upload an Image ( Debian6, ext4 and lvm) on my Ubuntu machine. But upload is always performed in raw mode, even I have created the image in Multiple partition Image : Single disk.[/quote]
I have just recently installed FOG on Debian. It works fine and that package is available.
[code]root@chicken:~# apt-cache show tftpd-hpa
Package: tftpd-hpa
Priority: extra
Section: net
Installed-Size: 172
Maintainer: Ubuntu Developers ubuntu-devel-discuss@lists.ubuntu.com
Original-Maintainer: Debian Syslinux Maintainers syslinux@lists.debian-maintainers.org
Architecture: i386
Source: tftp-hpa
Version: 5.0-11ubuntu2.1
Depends: debconf (>= 0.5) | debconf-2.0, upstart-job, libc6 (>= 2.11), libwrap0 (>= 7.6-4~), adduser
Suggests: syslinux-common
Conflicts: atftpd, tftpd
Filename: pool/main/t/tftp-hpa/tftpd-hpa_5.0-11ubuntu2.1_i386.deb
Size: 44756
MD5sum: fa90e5d3fc0bca0520877c4741b0b138
SHA1: 10524c8d583323652fc68d9a4c992a30662feb6f
SHA256: 8420383c8a20f44e927cfa0861bae8af0e12537f37766a13fb92367728eaa0d8
Description: HPA’s tftp server
Trivial File Transfer Protocol (TFTP) is a file transfer protocol, mainly to
serve boot images over the network to other machines (PXE).
.
tftp-hpa is an enhanced version of the BSD TFTP client and server. It
possesses a number of bugfixes and enhancements over the original.
.
This package contains the server.
Homepage: http://www.kernel.org/pub/software/network/tftp/
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu
Supported: 5y
[/code]

[quote=“regad, post: 3421, member: 1053”]My question is : is it already possible to upload an image ext4 format ?[/quote]
Yes

[quote=“astrouga, post: 3429, member: 907”][CODE][Fri May 11 09:02:46 2012] [error] [client ipAddressOfClient PHP Fatal error: Call to
undefined function isValidMACAddress() in /var/www/fog/service/Post_Stage2.php on
line 53
[/CODE][/quote]
Woaps, my bad, i removed this function from the old Code. I have commited it back into 867

[quote=“Fernando Gietz, post: 3432, member: 13”]Other bug:
I can’t access to the fog configuration in the web gui. I can only access to the external links.[ATTACH=full]112[/ATTACH][/quote]
The FOG Page for this section has not been created yet.

Blackout

I just ran a test, non resizable partition options are working. resizable is not.

I will look into this more. No doubt it’s service scripts related as im currently working on them.

Bugs in FOG 0.33

218

12.0k

17.3k

155.2k