*Attempting to send inventory............ FOREVER?
-
Yeah in middle of reinstall right now - going to setup RAID as well - don’t have my giga NICs cards in the mail yet but when I get them i’ll bond em up and now i’ll really be cooking. – I’ll keep you posted on this.
Works for me!!!
-
Where you ever able to figure out the problem or did you have to reinstall. I am getting the same error message, I however have updated the kernel and it was successful you probably needed to update your login password.
-
I find if the full inventory fails the quick inventory will still work most of the time. It could be you need a kernel update as suggested above me.
-
[SIZE=4][B][URL=‘http://fogproject.org/forum/members/chavenor.72/’]Chavenor, [/URL][/B][/SIZE]
The cause of this issue might be related to the configuration file located at /tftpboot/pxelinux.cfg/default. Take a look at the parameter under FULL HOST REGISTRATION sub menu and make sure the IP address of the FOG Server that the host is trying to resister is the correct IP address of your FOG Server. in order to do this go to Terminal and type: sudo vi /tftpboot/pxelinux.cfg/default. If the IP address of your FOG Server is not what its suppose to be then make the changes, save your config, exit and then type: sudo /etc/init.d/networking restart.
Hope this helped.
-
Thanks Amir, it helped me too!
-
[quote=“Duffney, post: 508, member: 194”]Where you ever able to figure out the problem or did you have to reinstall. I am getting the same error message, I however have updated the kernel and it was successful you probably needed to update your login password.[/quote]
Thank you. It was just that simple. After updating the Kernel I went under User Management and typed in the same password, update then boom!!!
-
As another addition to this particular issue, while rather dated, it still happens today. You can actually correct this issue, if you know the kernel has the appropriate network drivers for your client machines, by looking at the /var/www/{fog||html/fog}/service/auto.register.php file.
To help with troubleshooting if it’s this file and the web related configurations, look at your apache error logs when the host is attempting to send inventory. You can actually keep the system in this state. Once you make the configuration correct, it will actually inventory the host as expected even though it was, seemingly, stuck in a loop.
-
I am having the same error with a new model HP Elitebook 840 G3. Is it possible that the NIC is simply too new and the driver isn’t in the kernel yet?
I’ve tried the latest kernels (4.6.2 and 4.6.4) and they do not resolve the issue.
The network hardware details are:
Intel I219-V
HardwareID: PCI\Ven_8086&DEV_1570&subsys_8079103CSome other sites are recommending a “3.16 backport kernel” as having the driver needed?
Thanks.
Rama -
@Rama Wow you are reviving an long dead thread here.
I would strongly suggest that you start a new thread since info shared in this thread is probably not valid anymore.
BUT, some things to consider. What version of FOG are you using? If you are using FOG 1.2.0 stable then the newest kernel you may safely used is 4.1.2 (which should contain the driver you seek). Kernels 4.4.x and greater can only be used on the trunk build of fog 1.2.0 or fog 1.3.0-rc series.
If you run a compatibility test, does it report both nic and hard drive passing the test?
-
@george1421
sorry to dig up the zombie thread! I thought some context might be helpful
Looking at the fog web UI it says version 1.2.0, I’m not sure if thats the “stable” release or not, I’ll see if I can find out. In any case I’m about to test the 4.1.2 and I’ll post here with results. -
@george1421
and it works! Thanks very much , 4.1.2 did the trick
