Capturing MS Surface 3
-
I don’t see any relevant reads on this issue at this time. I also and getting a error on trying to quick inventory a MS Surface 3. It located the FOG fine but on the reboot for the quick inventory it failed to mount the drive it looks like to me. ANY IDEAS?
-
What version of fog are you using? If its 1.2.0 stable its not going to work. You will need to upgrade to the 1.2.0 trunk build to get support for m.2 disks. gpt, and windows 10 that the surface uses.
-
You’ll also need to configure whatever is doing DHCP to have vendor classes for UEFI.
If FOG is doing your DHCP - all will be configured for you with the trunk update.
If Windows Server is doing it, you’ll need to follow this guide:
https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence -
@kc7mdl Beside the already requested information a picture of the error will speak more than a thousand words. Please take and upload one.
I don’t see any relevant reads on this issue at this time.
Well I do find a lot of posts on surface 3 - have you read through all of those?
https://forums.fogproject.org/topic/6227/surface-3-fails-to-image
https://forums.fogproject.org/topic/6116/surface-pro-3-fog-1-2-compatibility
https://forums.fogproject.org/topic/5689/surface-3-imaging
https://forums.fogproject.org/topic/3662/surface-pro-3-pxe
https://forums.fogproject.org/topic/2432/surface-pro-pxe-boot-need-to-image-for-mass-deployment
…
