Around 100% cpu usage constantly

[Tom Elliott]

@coco65 This is highly dependent upon how you run sudo.

If you’re running where you first login as a user other than root and they sudo to root, you should run:

sudo -i <- if you’re logging in to become root.

To ensure the script being run under sudo get’s root sourcing first run the script as:
sudo bash -c 'script.sh'

[x23piracy]

@Tom-Elliott even if i try to run the script via sudo bash -c ‘script.sh’ high load still remains, that doesn’t fix it. and the problem wasnt there with older trunk versions.

[Tom Elliott]

@x23piracy The code that’s running the 100% cpu hasn’t changed.

[x23piracy]

@Tom-Elliott what should i do i cannot get away from the cpu burning. Any suggestions?
Also i cannot use systemctl like you suggested for 14.04:

root@fog-image:/home/fog# systemctl stop FOGMulticastManager
systemctl: Befehl nicht gefunden.

Ubuntu 14.04 uses Upstart as the init system, the plan to switch to systemd is planned for 14.10+. There are parts of “systemd” that have been used in Ubuntu for a long time, but for most intents and purposes when people say “systemd” they mean systemd-as-init.

And it burns for me can someone borrow a fire extinguisher? It’s hot here

Regards X23

[coco65]

@Tom-Elliott - I got tired of sudo so enabled root login. Does sudo -i make any difference then? Tried it.

[Tom Elliott]

I need solid proof if possible.

If you can find a revision where all is working properly and when it stops, I can probably be of more help.

Seeing as this seems a sporadic thing and only, to me, seems to appear on Debian based OS’s, I can guess maybe it’s got something to do with the session crontab?

Just a guess.

I haven’t made a change to the fog services that would cause this to sporadically occur.

Normally, when I do see the issue, it’s stuck in a forever loop (the services). This happens when it fails to read data from the database and get’s a 0 data.

[Wayne Workman]

@x23piracy If you have time, I can find out exactly what’s happening via TeamViewer and make a bug report afterwards.

[x23piracy]

@Tom-Elliott got it fixed, it’s embarrassing for myself, mysql wasn’t rechable outside 127.0.0.1, some automatic installed security patch (i have this enabled) must caused it (it worked before) i changed the bind in my.cnf away from 127.0.0.1 to 0.0.0.0 you can also use machines current ip address on eth you are using. 0.0.0.0 binds to every network device.

No need for any postprocessing script

Just an idea, the installer could check the bind address while installing/updating and warn if bind is 127.0.0.1 or localhost.

EDIT:

Not fully solved my fog master is now burning, maybe 0.0.0.0 is not making it reachable to 127.0.0.1 (localhost)… i get back
ok that was not the problem, 0.0.0.0 really binds all access worked via mysql client, so i restarted services on the fog master with the script and it worked, i will try reboots and so on…

Regards X23

[x23piracy]

@Wayne-Workman ok we can do this later

i did the following and it helped.
to installfog.sh at last line i added a call to restart_services.sh
additionally i added (as root) to cron (crontab -e) a call to restart_services.sh, use @reboot in front if the crontab line.

Regards X23

[x23piracy]

Hi, after thinking it is fixed, i found this that morning:

Now the Multicast Service is burning like hell.
After another service restart via script it’s silent again, i will report back tomorrow morning if the hell comes back.

Regards X23

[Tom Elliott]

@x23piracy just a guess that this goes crazy when updating.

[fry_p]

@Tom-Elliott said in Around 100% cpu usage constantly:

@x23piracy just a guess that this goes crazy when updating.

That’s the case for me.

[Tom Elliott]

I’ve added some code in hopes to prevent runaway services such as this. With any luck the 100% cpu do to FOG services will be no more.

The Defaults, in case of issues:

FOGImageReplicator = 600 seconds (10 Minutes)
FOGSnapinReplicator = 600 seconds (10 Minutes)
FOGPingHosts = 300 seconds (5 Minutes)
FOGScheduler = 60 seconds (1 Minute)
FOGMulticastManager = 10 seconds

The writing to log files isn’t as important as the timing. It’s the timing that’s causing the run away CPU cycles as they’re running infinitely. Without a sleep to slow it all down, the services will keep doing work without a break, causing the spikes you’re describing.

[coco65]

@Tom-Elliott

Just updated both the fog-server and the fog-node to 7945 on debian 8 both. Nothing has changed I am afraid. The fog server runs fine but the storage node is at a constant 100% processor load. The 4 FOG services (ImageReplicator etc) keep using every processor cycle they can get.

[Tom Elliott]

@coco65 Run the script as it was designed earlier.

service FOGMulticastManager stop && sleep 5 && service FOGMulticastManager start
service FOGPingHosts stop && sleep 5 && service FOGPingHosts start
service FOGImageReplicator stop && sleep 5 && service FOGImageReplicator start
service FOGSnapinReplicator stop && sleep 5 && service FOGSnapinReplicator start
service FOGScheduler stop && sleep 5 && service FOGScheduler start

OR:

systemctl stop FOGMulticastManager && sleep 5 && systemctl start FOGMulticastManager
systemctl stop FOGPingHosts && sleep 5 && systemctl start FOGPingHosts
systemctl stop FOGImageReplicator && sleep 5 && systemctl start FOGImageReplicator
systemctl stop FOGSnapinReplicator && sleep 5 && systemctl start FOGSnapinReplicator
systemctl stop FOGScheduler && sleep 5 && systemctl start FOGScheduler

This is going to make sure the services have enough time to restart. The Installer appears to not satisfy the “timing” properly.

[coco65]

@Tom-Elliott : Thank you that works (the second version with systemctrl)

[Tom Elliott]

That’s why I post both. I have no idea what type your system is going to use so I just brute force them all.

In either case, this shouldn’t be a problem even on subsequent updates now.