PXE-E32 error, unable to boot to fog from pxe

[Wayne Workman]

@george1421 It could even be requesting it from the wrong IP…

[george1421]

@Wayne-Workman Yes I agree a screen shot of the error would help. That way we can read between the pixels as it were.

[K.Hays]

@george1421

[Tom Elliott]

@K.Hays Have you tried updating to trunk?

[Tom Elliott]

First, all, this is 1.2.0 (Sorry it wasn’t asked before. And glancing over the posts, it wasn’t mentioned at all either).

[Wayne Workman]

@K.Hays Internal addressing is not available to the outside world and doesn’t harm anything to share. However I’d recommend not sharing external addressing.

[george1421]

@Wayne-Workman Isn’t there suppose to be text to the left of /default.ipxe? I just tried on my system and its too fast for me to catch.

[Tom Elliott]

@george1421 No, because it’s 1.2.0

[george1421]

@Tom-Elliott said in [PXE-E32 error:

First, all, this is 1.2.0 (Sorry it wasn’t asked before. And glancing over the posts, it wasn’t mentioned at all either).

Wow, how’d I miss asking that question. Well same on me.

https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk

[K.Hays]

@Tom-Elliott i have not tried updating to trunk, is that necessary?

[Tom Elliott]

@K.Hays said in [PXE-E32 error:

@Tom-Elliott i have not tried updating to trunk, is that necessary?

It’s not necessary, but I think you’d benefit a great deal from it.

[K.Hays]

@george1421 the owner is fog.root but how do i check the access level?

[Wayne Workman]

@george1421 said in [PXE-E32 error:

@Wayne-Workman Isn’t there suppose to be text to the left of /default.ipxe? I just tried on my system and its too fast for me to catch.

Good catch, George. It is supposed to have an address before it.

[george1421]

@K.Hays said in [PXE-E32 error:

@george1421 the owner is fog.root but how do i check the access level?

ls -la will do that for you. it should be -rw-r--r-- 1 fog root

But as Tom said you would be better off upgrading to the trunk. Don’t let the not stable term scare you off.

[Tom Elliott]

@Wayne-Workman No it’s not, not if the user is using FOG 1.2.0.

[K.Hays]

@george1421 ill do whatever to fix the issue at hand. If you think updating it to trunk will do that, then so be it

[george1421]

@K.Hays said in [PXE-E32 error:

@george1421 ill do whatever to fix the issue at hand. If you think updating it to trunk will do that, then so be it

I don’t want to lead you on that it will for sure fix your issue. But you will then have a consistent build that we can support. While the 1.2.0 build is still supported I don’t have a 1.2.0 stable system any more to compare your system against. That is the case with most of the Mods here. I have been running the trunk build for almost a year now. My memory of 1.2.0 stable is getting pretty weak these days.

[K.Hays]

@george1421 ok so how would i upgrade to trunk then? preferably without losing my current configs.

[george1421]

@K.Hays said in [PXE-E32 error:

@george1421 ok so how would i upgrade to trunk then? preferably without losing my current configs.

If course make sure you have a solid backup of your FOG server and then follow this post https://wiki.fogproject.org/wiki/index.php/Upgrade_to_trunk

Just for clarity, you made reference to having an older version of FOG installed at your site. What version was that? If it was before 1.2.0 it may be a better idea to spin up a new FOG server instead of upgrading.

[K.Hays]

@george1421 The system has since been removed. I believe it was 0.32, but this fog server is not on the same machine.