FOG restore only one partition
-
@Tom-Elliott said:
I’m almost certain, however, that this will still be an issue as we always default to using the FOG systems mbr file. This mbr file only has one partition within it. Maybe I was lucky with how I coded it though?
Sounds like a good reason to have… two… MBRs.
-
@Tom-Elliott
then what i have to do ?
do you want i test with windows 10 version.
However this morning i updatet to 6209 version, and now when i try to deploy, partclone “tell” me that “This is not a partclone image”.
Did you change something ?Thanks for your help
-
@Tom-Elliott
I made the test with windows 10 version and this is not the same error :
Image store corrupt : Unable to locate MBR(restorePartitionTableAndBootLoaders) -
@Wayne-Workman
I saw on the wiki that there is 4 partition types :
Single Partition
Multiple Partition - Single Disk
Multiple Partition - All Disks
Raw ImageOn the web frontend
Single Disk - Resizable - (1)
Multiple Partition Image - Single Disk (Not Resizable) - (2)
Multiple Partition Image - All Disks (Not Resizable) - (3)
Raw Image (Sector By Sector, DD, Slow) - (4)As you can see the first option is different.
Then may be i would choose “Multiple Partition - Single Disk”
And it’s, may be, for this reason it failed now ? -
@Tom-Elliott
Then do you think i have to restore manually my station or it will be possible from fog ? -
@plegrand Try changing the OS type to Windows 10.
-
@Tom-Elliott
As i said before, i already done that without success -
@plegrand Can you try with it set back as XP? I don’t see that being retested.
-
@Tom-Elliott
I made the test with windows xp type on 6209 version : partclone “tell” me that “This is not a partclone image”.
Not the same error as yesterday with other version (6194) -
@Tom-Elliott Same problem with 6211
-
@Tom-Elliott
I just made the test today with 6237 version. Same problem : partclone “tell” me that “This is not a partclone image”.
Do you think there is a solution to restore image from fog or do i have to reinstall the station ? -
@plegrand there can be a solution but I have to figure out what that solution will be.
-
@Tom-Elliott
for the moment i reinstalled the station and i continu my tests. I’ve got one question :I saw on the wiki that there is 4 images types :
Single Partition
Multiple Partition - Single Disk
Multiple Partition - All Disks
Raw ImageOn the web frontend
Single Disk - Resizable - (1)
Multiple Partition Image - Single Disk (Not Resizable) - (2)
Multiple Partition Image - All Disks (Not Resizable) - (3)
Raw Image (Sector By Sector, DD, Slow) - (4)As you can see the first option is different.
What is the good one
Is it single disk or single partition ?And finally, instead opening a new thread, i’ve got a last question :
all my host have a red circle with exclamation point and this error message :
“no such device or address”. What does that mean ?Thanks for your help
-
@Tom-Elliott
Hello
i just made a test today with an other station
Dell Optiplex 760 with again 3 partitions
Here is the image definition :
default: Windows 2000/XP
Single Disk - Resizable
EverythingThe capture seems to works fine and i can see in the “images” directory :
ls -al /home/images/Optiplex760780/
total 8355044
drwxrwxrwx 2 root root 4096 févr. 23 10:09 .
drwxrwxrwx 7 root root 4096 févr. 23 10:09 …
-rwxrwxrwx 1 root root 3 févr. 23 09:44 d1.fixed_size_partitions
-rwxrwxrwx 1 root root 249 févr. 23 09:49 d1.minimum.partitions
-rwxrwxrwx 1 root root 30 févr. 23 09:49 d1.original.fstypes
-rwxrwxrwx 1 root root 0 févr. 23 09:44 d1.original.swapuuids
-rwxrwxrwx 1 root root 3706587 févr. 23 09:49 d1p1.img
-rwxrwxrwx 1 root root 8551432512 févr. 23 10:09 d1p2.img
-rwxrwxrwx 1 root root 392584 févr. 23 10:09 d1p3.img
-rwxrwxrwx 1 root root 249 févr. 23 09:44 d1.partitionsBut when i try to deploy this image on the same station i’ve got again this error message at the beginning :
“This is not a partclone image”Now the station is “dead” and cant boot “Error loading operating system”
It’s a real problem because we have a lot of this kind of station
-
I just added some more code and I think I finally found the problem.
-
@Tom-Elliott Hello
does that mean that with the latest version it will work ?
Do you want i try ?
Thanks for your help -
@plegrand Yes, would be great if you can upgrade to the latest version and see if it’s fixed. Please report back!
-
@Sebastian-Roth
i have to capture again before deploy ?Just to be clearer, here is my configuration :
On my own pxe server(dhcp and tftp) 192.168.151.247
dhcp is configured like that :next-server 192.168.151.247; filename "pxelinux.0";
then on my tftp server i’ve got pxelinux.0 into the tftp root directory
and
this configurationLABEL FOG_ETUDIANTS KERNEL fog/ipxe.krn dhcp && chain http://192.168.39.243/fog/service/ipxe/boot.php?mac=${net0/mac}
192.168.39.243 is the fog ip address
Do i have to put on my tftp server the new ipxe.krn file ? -
@plegrand you should not have to re upload the image.
-
@Tom-Elliott Hello
Fog 6427 / 4874here is the tests i made
- Restore the station with an old symantec ghost image
- List partitions with diskpart
DISKPART> list disk Disque ### Statut Taille Libre Dyn Gpt -------- --------- ----------- -------- --- --- Disque 0 Connecté 149 GB 0 B DISKPART> select disk 0 Le disque 0 est maintenant le disque sélectionné. DISKPART> list partition Partition ### Type Taille Décalage ------------- ---------------- ------- ----------- Partition 1 OEM 126 MB 20 KB Partition 2 Principale 49 GB 126 MB Partition 3 Principale 100 GB 49 GB
- Defragmentation of all the partition
- On fog create a image :
default: Windows 2000/XP Single Disk - Resizable Everything
- Assign the new image to the host
- On fog create a new capture task for the station as a debug task
- Launch the task
- Capture works fine
On the server fog :
d1.fixed_size_partitions d1.minimum.partitions d1.original.fstypes d1.original.swapuuids d1p1.img d1p2.img d1p3.img d1.partitions
cat d1.fixed_size_partitions 1:
cat d1.minimum.partitions label: dos label-id: 0x2bd2c32a device: /dev/sda unit: sectors /dev/sda1 : start= 40, size= 257480, type=de /dev/sda2 : start= 257520, size= 31386360, type=7, bootable /dev/sda3 : start= 102657680, size= 779520, type=7
cat d1.original.fstypes /dev/sda2 ntfs /dev/sda3 ntfs
cat d1.partitions label: dos label-id: 0x2bd2c32a device: /dev/sda unit: sectors /dev/sda1 : start= 40, size= 257480, type=de /dev/sda2 : start= 257520, size= 102400160, type=7, bootable /dev/sda3 : start= 102657680, size= 209839360, type=7
At reboot, the station stay displaying “Booting…”
Then i try to deploy the image
- Create a new deploy task for the host
During the restauration of /dev/sda1, i’ve got the following error message from partclone
Target partition size (132MB) is smaller than source 132 MB. Use option -C to disable size checking (Dangerous)
And just after
Image failed to restore and exited with exit code 0 (writeImage) Args passed /images/test/d1p1 img* /dev/sda1
Then the only solution is to redeploy the old ghost image