PXE Boot HP X2 210 (Hybrid tablet Windows 10 Pro)

[Matthieu Jacquart]

@Wayne-Workman Thanks that’s nice, I really had impression to waste your time

@Sebastian-Roth ok, so first with old ipxe file

One strange thing is that this ipxe.efi file makes the tablet reboot after few minutes : first time I began to type command and make other thing, when I came back tablet had reboot, and second time while I was taking a picture before typing “boot” command. But once I’ve entered “boot” command, even after 30 minutes tablet always stays on prompt like in picture.

And with last ipxe file, I had debug=efi_wrap I hope it was ok
Before “boot” command

And after “boot” command

Much more text ! I hope it helps

Thanks again to all of you

[Sebastian Roth]

@Matthieu-Jacquart You are doing a great job! I really hope this will be fixed soon! So iPXE from an older source does not seam to be any better - good to know. Not sure what the rebooting is about.

One thing I notice in that output is GraphicsOutput. Maybe it’s just not able to print on the screen but still running. I kind of doubt but it’s possible. Could you configure a monitoring port on your switch to capture a packet dump of the tablet booting up using wireshark? We might see another DHCP request or some other noise from it.

@george1421 and @Wayne-Workman Do you want to give this iPXE binary a try as well? Any known working UEFI machine will do. Just as a reference to see if there is a difference in the output or what should be seen next. I guess you’d have to take a video. AFAIK some newer iPhones can take slow motion video. Would be awesome.

[Matthieu Jacquart]

@Sebastian-Roth Do you want me to test the ipxe file you sent to Georges and Wayne ?
For capturing packet dump, I don’t really know how to do that, do you have some tips ? I’ve installed wireshark but I don’t know how to specifically capture packet on one switch port…

[george1421]

@Sebastian-Roth said:

One thing I notice in that output is GraphicsOutput. Maybe it’s just not able to print on the screen but still running. I kind of doubt but it’s possible. Could you configure a monitoring port on your switch to capture a packet dump of the tablet booting up using wireshark? We might see another DHCP request or some other noise from it.

This thought may be in line with what I found with grub booting. I needed to add the function insmod efi_gop or the output was not visible on that e6220. As far as I could tell the FOS client was running just the screen output was not visible.

I will test the ipxe boot when I get in the office in about 2 hours.

[Sebastian Roth]

@Matthieu-Jacquart Forget about the packet dump for now I’d say. Some good hints from iPXE dev Michael Brown pointed me a way to further dig into this. The blue lines in the last picture you posted is not really iPXE anymore. This is the linux kernel already!! I had no clue… Somehow it is possible for iPXE to track the UEFI calls the linux kernel is doing. This is crazy stuff. Never been there before but it is very interesting I find.
So back to the point. All the calls like GraphicsOutput I can see in the kernel source. Graphics/video detection seams to run through without any issue! Therefore I think wireshark won’t give us a clue.
So what’s next? I added an earlyprintk debug output to the linux kernel source. Find a new binary called bzImage_ng here. I am not sure if this will work but it’s worth a try. Use the latest uploaded ipxe.efi binary (DEBUG=efi_wrap) and add debug earlyprintk=efi to the parameters when loading bzImage_ng. If we see the output from the kernel than we can go on step by step. From then on we can move back to the original ipxe binary where you don’t have to type all the commands in the shell anymore!

[Matthieu Jacquart]

@Sebastian-Roth I hope commands are ok !

Before enter “boot” command

After enter “boot” command

[Sebastian Roth]

@Matthieu-Jacquart Yeah! Success. Now we have the kernel talking to us. I’ll look through the kernel code a little more to see where to properly add debugging messages and will upload a new binary later on. Might be in the evening as I have some other things to do as well. Will post here again.

[Matthieu Jacquart]

@Sebastian-Roth ok good news !
No problem for new binairy, I finish job in 2 hours, test will be for tomorrow morning !

[Sebastian Roth]

@Matthieu-Jacquart Meanwhile you can setup things to be prepared. Go back to the original ipxe.efi binary (so you don’t have to do all the typing). Make sure to register the USB NIC MAC address in the web interface by hand and add debug earlyprintk=efi to the kernel parameter for this host.
When I have a new kernel ready you can just go in /var/www/fog/service/ipxe, rename original bzImage to bzImage.orig and bzImage_ng to bzImage… Or change the name of the kernel via web interface (FOG configuration -> FOG settings …) and then boot the tablet.

[Wayne Workman]

@Sebastian-Roth said:

Do you want to give this iPXE binary a try as well?

I would but you guys seem to have found success?

[Matthieu Jacquart]

@Sebastian-Roth I create tablet on fog interface, I have to put “debug earlyprintk=efi” in “Host Kernel Arguments” right ?

[Sebastian Roth]

@Wayne-Workman and @Matthieu-Jacquart Yes!

[Sebastian Roth]

@Matthieu-Jacquart Here we go, get the new kernel image called bzImage_mj (just making up those extensions). Looking forward to what we will see.

[Matthieu Jacquart]

@Sebastian-Roth Oh my personalized kernel, nice

Here you are

[Sebastian Roth]

Ok, this is exactly where it hangs: http://lxr.free-electrons.com/source/arch/x86/boot/compressed/eboot.c#L473 (memcpy but allocation of memory seams fine further up in the code)

We’ll see if iPXE devs can help with this or we will need to get in contact with kernel devs as well. I am following this and will keep you all posted.

@Matthieu-Jacquart Meanwhile I’d ask you to try booting the bzImage_mj straight as UEFI binary from a USB stick to see if this works. We cannot use GRUB in between to check (I was told by Michael Brown) because “GRUB has the ability […] to treat the kernel as a bzImage rather than an EFI executable. This enters the kernel via a different path, which probably bypasses the code we’re looking at in eboot.c”

This can be done on Linux and Windows:

1. Get an empty USB Stick, partition with one full primary partition (most probably already done!)
2. Format with FAT32
3. Create X:\EFI\BOOT (or /mnt/EFI/BOOT)
4. copy and rename ‘bzImage_mj’ to X:\EFI\BOOT\bootx64.efi (or /mnt/EFI/BOOT/bootx64.efi
5. Grap your tablet and boot of the USB stick in UEFI mode

If you get past the setup_efi_pci issue you will run into a kernel panic. But that’s ok. We just want to see if there is any difference booting the same kernel in real UEFI mode directly or via iPXE.

[Matthieu Jacquart]

@Sebastian-Roth Ok done, I have exactly same screem than with ipxe boot

[Sebastian Roth]

@Matthieu-Jacquart Thanks a lot for your fast reaction. I somehow thought/hoped this wouldn’t be the case and that it had something to do with iPXE. But from what we see now current main kernel is not able to directly EFI boot on your tablet. I really wonder why we don’t find other people having the same issue. Maybe this is still very new and most people use GRUB (bypassing the kernels efi_init)?!? I am trying to get in contact with kernel devs on this. But I cannot promise anything. Might take some hours but could be weeks as well. I just don’t know. But I am sure we are spot on the issue (which is the main factor for getting it fixed).

[Sebastian Roth]

@Matthieu-Jacquart Just had the idea to try older kernels as well. Would you mind? Just download some older versions and put it on USB as done before. Lets see if any of these works. I doubt it - but it’s valuable information for the kernel devs!

http://sourceforge.net/projects/freeghost/files/KernelList/Kernel.TomElliott.4.1.2.64/download
http://sourceforge.net/projects/freeghost/files/KernelList/Kernel.TomElliott.3.19.3.64/download
http://sourceforge.net/projects/freeghost/files/KernelList/Kernel.TomElliott.3.17.4.64/download

[Matthieu Jacquart]

@Sebastian-Roth Tested but none of them work, screen stays black…

[Sebastian Roth]

Fine then, waiting for some answers. Keeping my fingers crossed. Here if you want to follow:

http://forum.ipxe.org/showthread.php?tid=7938
http://article.gmane.org/gmane.linux.kernel.efi/7361