Acer Aspire E 11 ( ES1-111M-P2YU )

[Wayne Workman]

@Tom-Elliott how about a secondary function for getting the MAC if the primary function fails?

I’ll work on this…

[nbuursma]

I’m getting this too… part of trying to get another issue fixed I re-installed from trunk and now I’m dead in the water.

I can’t register any host - invalid mac.

Should I downgrade? How do I do that?

[Wayne Workman]

@nbuursma Actually, Tom says it might be fixed now. I just haven’t tried yet, got caught up with something. Try to update.

[nbuursma]

@Wayne-Workman said:

@nbuursma Actually, Tom says it might be fixed now. I just haven’t tried yet, got caught up with something. Try to update.

Will do!

[nbuursma]

@Wayne-Workman said:

@nbuursma Actually, Tom says it might be fixed now. I just haven’t tried yet, got caught up with something. Try to update.

Not fixed… still getting “Invalid Mac Address” when registering host.

[GFm]

@Wayne-Workman

Tried updating via

svn checkout https://svn.code.sf.net/p/freeghost/code/trunk

and it checks out and installs 5972. Is there a different way I should get the latest update? That was the one I was still on?

Thanks!!

[Wayne Workman]

@GFm said:

Is there a different way I should get the latest update?

There are several ways, but the one you did is valid. you could shorten that line by just typing svn up at that step to pull the latest.

[GFm]

Cool thanks… I’ll give it a try!

[nbuursma]

@GFm said:

Cool thanks… I’ll give it a try!

I just updated and go the same thing.

[GFm]

@Wayne-Workman

Tried that still says Version: 5972 in fog… it said checked out rev 4653

[Wayne Workman]

@GFm @nbuursma Please be patient - the Devs and I will look more closely at this over the weekend.

[GFm]

@Wayne-Workman
Thanks a lot!

[Tom Elliott]

@GFm I hope this is all fixed now if you are willing to up and test.

[GFm]

@Tom-Elliott I will try on Tuesday… Thanks for updating it so quickly!

[GFm]

Updating to the latest SVN fixed my problems… thanks!!
@Wayne-Workman @Tom-Elliott

[Wayne Workman]

The below MAC address detection issue is resolved as of svn 4678 cloud 6020

[Wayne Workman]

Fog settings so far for this device:

Boot file: ipxe.efi
Host EFI Exit Type: REFINED_EFI

[Wayne Workman]

Hit a bump… @Developers

https://youtu.be/Y4jvRXmekTs

Image type I tried: Windows 8.1 resizable. I’ll try non-resizable and see what happens.

[Wayne Workman]

single disk multiple partition Non-resizable

Appears to work so far. It’s uploading the large partition at the moment.

UPDATE

Yes, it appears to have captured correctly:

ls -laht /images/acere11manufacturerbase

total 28G
drwxrwxrwx. 27 fog  root 4.0K Jan 19 10:13 ..
drwxrwxrwx   2 root root  100 Jan 19 10:12 .
-rwxrwxrwx   1 root root  12G Jan 19 10:12 d1p5.img
-rwxrwxrwx   1 root root  16G Jan 19 10:01 d1p4.img
-rwxrwxrwx   1 root root 2.0M Jan 19 09:43 d1p3.img
-rwxrwxrwx   1 root root  24M Jan 19 09:43 d1p2.img
-rwxrwxrwx   1 root root 232M Jan 19 09:42 d1p1.img
-rwxrwxrwx   1 root root 1.0M Jan 19 09:42 d1.mbr

[Tom Elliott]

@Wayne-Workman This looks like issue with the disk layout maybe?