Computer wont boot from hard drive after PXE from FOG
-
Yes my images were set to win 2000/win xp. I had to change them all back to windows 7. It still didnt solve my problem. For some reason the new version of FOG doesnt like this model of DELL. I am thinking about adding an intel ethernet card and disabling the integrated broadcom.
-
Same problem with exit.
-
did you try downloading a different kernel? also check to see if there are bios updates for the XE
-
Havent tried a different kernel. It is on the lates bios. What is the best way to update the kernel?
-
How do you know what kernel you are currently using?
-
when you updated to 1.2 I believe it updates the default kernel, there are some newer ones you can download them from the fog configuration tab, there is an option for downloading kernels.
downloading an additional PXE boot image, save it as a custom option bzimage###. then go to your system inventory and set the machine to use a custom boot loader, fog/kernel/bzimage###. Then make sure that you delete the pending task, so that it picks up the custom kernel when it creates the new task. Since your other systems are working fine with the current default it would be best to test a different kernel without overwriting the current one.
you can look here [url]http://www.fogproject.org/wiki/index.php/WorkingDevices[/url] to see if your system is on the list and what kernels have been tested to work with it.
-
this is not a kernel issue. it is a ipxe issue. updating the kernel will not help
-
We fixed this by runing startup repair with the windows 7 install disk. For some reason with fog .32 it was using the bootmanager from the fox pxe boot image.
-
Forgot to mention. Thank you very much for your help on this:):)
-
The start of computers to display FOG PXE Then when they go to boot from the hard disk goes black screen the cursor flashes in the upper left corner and nothing happens.
Someone has the solution to this problem
-
@alli
Yep,Make sure your network is good to go. In some cases you may also need to power down completely, and ācoldā start the system.
First, check the network though. I actually saw this exact issue today. All other systems were perfectly fine, it was just this one system that had the issue. Replaced patch cable and restarted system. Everything succeeded.
-
@Tom-Elliott
yes but,I have a good connection and restart the computer and turn it off and still the same . I do not know what it is
and not found. -
I have the same problem you had at the time of loading the image I get black screen and a blinking in the corner hairline.
Do you have the solution to this problem?
Could you help me fix it? -
Microsoft AD environment with 200+ computers. Upgraded fog server to 1.2 from 0.32. No previous similar problems.
On approximately 10% of campus computers, we are also seeing the āperma-blinkingā top left cursor after
the Fog Menu screen during PXY boot. Laptops and Desktops running Windows 7. Have to turn off PXY boot
for work around. Today tried my first Fog āQuick Imageā on a Dell Latitude with this issue and it also hangs about
15 minutes into the reimage on the same blinking cursor screen. Hoping for some information, directions, questions.
Thanks very much. -
@MJR Correction; the Quick Image worked (after turning back on PXE) , it apparently just hung on the final reboot in the same place it always does.
-
@MJR Can you provide a list of models that are problematic?
-
@Wayne-Workman Thanks for your response; I donāt know how specific you need me to be but we are 90% Dell.
Generally speaking, thereās at least one Optiplex 780 (2012?), a few Optiplex 3010ās (2013), and 3 or 4 Dell Latitude E6520ās (2011). Our Network Engineer suggested maybe a certain brand/model of NICāsā¦ -
@MJR I was asking for exact models, lol. But thatās fine - you can do what I was going to do. Please look through these two lists, youāll know what youāre looking at:
https://wiki.fogproject.org/wiki/index.php/WorkingDevices
https://wiki.fogproject.org/wiki/index.php/ProblematicDevices
Now, if you find some that are noted as working but are not working for you - we need to explore those.
-
Hello all, iām googling/reading a lot of thread from at least a week on this problem, just today i reg to this forum, only to say I have same issue with Acer P253M notebook.
I tried recover image (from Acer dvd disks) with win7 and win10, same issue, Bios boot type was set to ālegacyā (not uefi) but the O.S. was set by Acer with GPT partition.
I fear this is the problem, the GPT Partition.
Iām going to try with an āMBR partitionāā¦ (microsoft call the partition schema in this clear wrong way)ā¦But after all i would ask: what kind of boot pxe-fog-booting-img use?!
Itās Syslinux?
May be itās there the problem, could a syslinux update (or downgrade) to solve the problem?I found this workaround for an old version of Fog in wiki:
https://wiki.fogproject.org/wiki//index.php?title=Boot_looping_and_Chainloading
and other site
http://community.spiceworks.com/how_to/108551-fog-boot-looping-and-chainloadingBut i canāt apply this method just because i canāt find /tftpboot/pxelinux.cfg/default
iām going off roadā¦?Thank you.
-
@ciry fog 1.0+ versions do not use syslinux. fog uses ipxe.
trying to boot a gpt uefi system with the bios set to legacy would not work regardless of pxe.
fog gives you multiple methods to exit the pxe environment to try to load the OS, have you tried them all?
