Hardware Currently Working with FOG v1.x.x

Tom Elliott

@mspritch Can you try using the SVN included intel.pxe file for those systems, or the undionly.kkpxe file?

mspritch

Up until last week we’ve been using a newer-than-1.2.0 build, but I’m not sure what (and whilst trying to dig out the build number I’ve just managed to update that build’s directory to v3500 so can’t tell what it was now). 3285 rings a bell.

We’re currently on 3484, upgraded when trying to troubleshoot these machines. I’ve just imaged a mix of Latitude D630s and E5500s plus Optiplex 745s, 755s and a 380, all using this build. The other ones listed as working all booted on this build so I suspect they’ll image as well (they imaged on earlier builds).

Been using undionly.kpxe, was also until recently using some mod I found somewhere that forced it to ask for the FOG server address before the menu loaded, but that didn’t work either. Can’t find a link to it now but it was on a FOG-related page, possibly something else by Tom?

Presumably because of the ProxyDHCP setup ours doesn’t work unless there’s an undionly.0 symbolic link set up in the tftpboot folder. I’ve added another entry to the PXE boot menu so I can test other KPXEs without trashing the working one, switching between them by pointing the test symlink (in my case intel.0) at the various kpxe files.

These tests were made on build 3484 using a HP 500B PC.
undionly.pxe: Clears the screen and drops to Reboot and Select proper Boot Device
undionly.kpxe: Picks wrong IP address, connection eventually times out
undionly.kkpxe: Same as undionly.kpxe
intel.efi: Hangs at a cursor (Caps Lock still responsive)
intel.pxe: After PXEXT it drops to Reboot and Select proper Boot Device
intel.kpxe: After PXEXT it drops to Reboot and Select proper Boot Device
intel.kkpxe: After PXEXT it gives a PXE-M0F Exiting PXE ROM.
ipxe.pxe: Same as undionly.kpxe
ipxe.kpxe: After listing the (correct) boot server IP it gives a PXE-E79 NBP is too big to fit in memory, then a PXE-M0F
ipxe.kkpxe: As above
realtek.pxe: Same as undionly.kpxe
realtek.kpxe: Same as undionly.kpxe
realtek.kkpxe: Same as undionly.kpxe

The HP’s supposed to be getting redeployed to a school but I’m happy to hang onto it for testing, there are always Optiplex 3010 and 3020 machines in the storeroom that I can do further testing on if need be.

mspritch

WORKING
Dell Optiplex 760
Intel onboard Gigabit Ethernet
Intel Boot Agent GE v1.3.81
4.0.4 kernel
9th June 2015
Resizeable

TheKoR

Don’t work
IBM R50
Dell D610
HP NC6120
Fujitsu C1320
All 4 can’t moun’t NFS - All IDE Drive

don’t work with this version but work in previous :

Dell D410

kasper

This does work
HP EliteBook 8760w
NIC Intel 82579LM
PXE 2.1
Laptop
Default Kernel
6/17/2015
Multiple Partition Image - Single Disk (Not Resizable)

Wayne Workman

@kasper said:

This does work
HP EliteBook 8760w
NIC Intel 82579LM
PXE 2.1
Laptop
Default Kernel
6/17/2015
Multiple Partition Image - Single Disk (Not Resizable)

Are you asking for help or just reporting???

TheKoR

don’t work with this version (3761) but work in previous :

HP D530 CMT - XP
Dell Latitude E5500 - Vista

ch3i

@TheKoR said:

don’t work with this version (3761) but work in previous :

HP D530 CMT - XP
Dell Latitude E5500 - Vista

Troll : T’es un mauvais c’est tout…

TheKoR

i think i remember it’s work with undi . intel, but not in place in new versions

Troll : je suis pas mauvais, mon cerveau est en vacances avec la chaleur !

Edit : try with the 3 intel, and still don’t work

TheKoR

don’t work with this version (3783) but work in previous :
hp nw9440 - XP - fail to mount nfs, and we try with all pxe.

same error than other older computers

TheKoR

8760w - windows 10 - svn 4266 - works fine up and down

dutchers4

Dell Venue 11 Pro - can’t get it to work, using Legacy Mode with USB Network ASIX AX88772A/B device
Running Fog 1.2 Ubuntu 14.04
Using a DHCP server running Windows Server 2003
undionly.kpxe hangs on iPXE Initialising devices
unidionly.kkpxe does a Boot Loop

Wayne Workman

@dutchers4 said:

Dell Venue 11 Pro - can’t get it to work, using Legacy Mode with USB Network ASIX AX88772A/B device
Running Fog 1.2 Ubuntu 14.04
Using a DHCP server running Windows Server 2003
undionly.kpxe hangs on iPXE Initialising devices
unidionly.kkpxe does a Boot Loop

A Dell Venue 8 Pro has been successfully fog’d only a month or so ago. I’m sure the same steps will work for you. See the Dell Venue listing here: https://wiki.fogproject.org/wiki/index.php/WorkingDevices You will need to move to FOG Trunk in order to accomplish this, and you’ll need to setup DHCP Vendor Classes so that it’s given the correct boot file while keeping all of your other clients working too.

If you need any help past this post - please create a thread called “Dell Venue 11 Pro” and we can give more focused help.

cbelloc

@kasper said:

Multiple Partition Image - Single Disk (Not Resizable)

Not working on :

HP Z620

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

Working on :

HP Z230 SFF

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

HP Compaq DC5700

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

HP Compaq DC5800

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

HP Compaq DC6000

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

HP Compaq DC6200

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

HP Elite 800 G1

Fog 1.20
Default Kernel
Multiple Partition Image - Single Disk (Not Resizable)

JBeene

Working:
Dell Precision M 4700
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Precision M 4800
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Precision M 6800
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Vostro 3750
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Inspiron 5720
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Precision T1700
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Precision 3510 without USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Not Working:
Dell Precision 3510 with USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Wayne Workman

#wiki worthy - I need to go through this thread and make sure all this is in the working hardware list.

iyoung

HP Compaq 6200 Pro
Intel 82579LM Gigabyte Network Connection
undionly.kpxe
FOG 1.2.0
03-16-2016
Single Disk - Resizable

Note on 6200 - I’ve occasionally run into issues with SD - R where after imaging, Explorer reports the shrunken size of the partition but Disk Management show the partitions being the right size (first part being 100 to 350mb and the second part the rest of the disk) To remedy this go to DISKPART, select the miss-sized partition and run EXTEND FILESYSTEM.

HP DC7700
Broadcom NetXtreme Gigabit Ethernet
undionly.kpxe
FOG 1.2.0
03-18-2016
Single Disk - Resizable

Note on 6200 and DC7700 - Also as is noted here, HP adds partitions that make using Single Disk - Resizable fail out. The partition is also created when making update to the BIOS. Unlike what the article listed says however, you can delete the partition using DISKPART.

groove93

Working with Fog 1.2.0

Dell Latitude E5570
Fog 1.2.0
Intel Ethernet Connection I219-LM
Kernel bzImage Version 4.5.3
Kernel bzImage32 Version 4.5.3
Ipxe 1.0.0
Date Tested 6-13-2016
Single Disk- Resizable

Running Windows 7 SP1 64-bit
Skylake Chipset
If manually installing a fresh copy of Windows 7 on this device, follow the instructions using this link: http://de.community.dell.com/techcenter/enterprise-client/w/wiki/2567.how-to-install-windows-7-on-systems-with-intel-skylake-cpu

imposter22

This post is deleted!

JBeene

Working:
Dell Precision 3510 without USB C
-Fog 1.20
-Default Kernel (had to update kernel to latest)
-Multiple Partition Image - Single Disk (Not Resizable)

Not Working:
Dell Precision 3510 with USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Hardware Currently Working with FOG v1.x.x

172

12.0k

17.3k

155.2k