Working:
Dell Precision M 4700
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Precision M 4800
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Precision M 6800
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Vostro 3750
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Vostro 3750
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Inspiron 5720
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Precision T1700
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Dell Precision 3510 without USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Not Working:
Dell Precision 3510 with USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Working:
Dell Precision 3510 without USB C
-Fog 1.20
-Default Kernel (had to update kernel to latest)
-Multiple Partition Image - Single Disk (Not Resizable)

Not Working:
Dell Precision 3510 with USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Working:
Dell Precision 3510 with USB C
-8157 (trunk) May work with 1.2 as I had a dirty partition giving me trouble.
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Could it be that was a RAW image deployment error vs a multiple partition image deployment? Yes, imaging is going well.
We had to downgrade the TPM from 2.0 to 1.2, since we are not doing UEFI.

Are there any BIOS updates/was it working on an older BIOS version? Have you tried any other kernels?

Working:
Dell Precision 3510 with USB C
-8157 (trunk) May work with 1.2 as I had a dirty partition giving me trouble.
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)

Image looks to be working now. Read up on the new Fog Client before I recorded my sysprep. I really appreciate all the help!

I’ve ran into dirty partition issues before. I should’ve known I should go over the initial Dell partitions with badger blood and napalm before I build my image.

3510nosysprep is the image name.

Ran the debug and did a fixpart. It said it found remnants from a prior partition, I removed that, and then selected A for MBR option. It seems to have not wrecked data on the drive and booted back into the Audit Mode for Windows 10.

Recorded image using Multiple Partition - Single Disk No resize. Since there was no errors with that, I then put that image on another machine. It also booted up into Audit mode. I’ll run my sysprep file then record the image again and see how it works. Thank you for the help so far.

@george1421 I have several for testing, until I get the image built.

Recorded RAW image and then tried putting it on another laptop of exact specs.

Going to do a debug capture next.

Got the following message:

@Tom-Elliott Haha, I didn’t say what it wasn’t doing. So it gets to the point in the screenshot and doesn’t get past that part (left overnight). Below is the screenshot when setting it to Single Disk - Resizable. I’ve also tried Multiple Partition Image - All Disks.

@george1421 Secure Boot is disabled. I have it disabled to do Legacy boot and PXE Boot.

Working:
Dell Precision 3510 without USB C
-Fog 1.20
-Default Kernel (had to update kernel to latest)
-Multiple Partition Image - Single Disk (Not Resizable)

Not Working:
Dell Precision 3510 with USB C
-Fog 1.20
-Default Kernel
-Multiple Partition Image - Single Disk (Not Resizable)